Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Tailoring interfacial states for improved n-type bismuth telluride thermoelectrics

Tuning Multiscale Microstructures to Enhance Thermoelectric Performance of N‐type Bismuth‐Telluride‐Based Solid Solutions

Enhancing the Thermoelectric Property of Bi2Te3 Through a Facile Design of Interfacial Phonon Scattering

Enhanced Thermoelectric Properties of Bi2Te2.7Se0.3/hexagonal BN Composites and Optimized Modules for Power Generation

Enhanced thermoelectric performance and mechanical strength of n-type BiTeSe materials produced via a composite strategy

Enhanced Thermoelectric Performance of N-Type Bi2(Se, Te)3 Bulk Nanocomposites Through Ti Doping

Enhancing Thermoelectric Performance of n-Type Bi2Te2.7Se0.3 through Incorporation of Amorphous Si3N4 Nanoparticles

Tailoring Nanoporous Structures in Bi2Te3 Thin Films for Improved Thermoelectric Performance

Realize High Thermoelectric Properties in N-Type Bi2Te2.7Se0.3/Y2O3 Nanocomposites by Constructing Heterointerfaces.

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Enhancing the figure of merit of n-type PbTe materials through multi-scale graphene induced interfacial engineering

Achieving High Thermoelectric Performance Through Constructing Coherent Interfaces and Building Interface Potential Barriers in N-Type Bi2Te3/Bi2Te2.7Se0.3 Nanocomposites

Enhanced Thermoelectric Performance of SnTe-Based Materials via Interface Engineering

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Entropy Engineering Promotes Thermoelectric Performance While Realizing P–N Switchable Conduction in BiSbSe1.5Te1.5

Optimized Hetero-Interfaces by Tuning 2d Sns2 Thickness in Bi2te2.7se0.3/Sns2 Nanocomposites to Enhance Thermoelectric Performance

Construct Amorphous Polymer Interface to Enhance the Thermoelectric Performance of Commercial Bi0.5Sb1.5Te3 Materials

Enhancement in thermoelectric performance of bismuth telluride based alloys by multi-scale microstructural effects

Carrier tuning and multiple phonon scattering induced high thermoelectric performance in n-type Sb-doped PbTe alloys

Tailoring Thermoelectric Performance of n-type Bi2Te3 through Defect Engineering and Conduction Band Convergence