Abstract:Stress corrosion cracking (SCC) is considered as the main risk of tubing steels during the exploitation of oil and gas fields, which could result in sudden and catastrophic failures of downhole tubing. Especially in annular downhole environment, P110 tubing steel is prone to sulfide stress corrosion cracking and hydrogen embrittlement (HE) where S2- could be originated from bio-reduction of SO42- inspired by sulfate-reducing bacteria (SRB). Currently, extensive work have been performed to investigate the influence factors on SCC and mechanism of tubing steels, but limited researches have been conducted on the SCC of P110 tubing steel in annular downhole environment, particularly, on the early detection of SCC. In this work, the SCC behavior of P110 low alloy steel in simulating sulphur-containing annular fluid (SAF) and the effect of S2- concentration on the initiation and propagation of crack were investigated by slow stress rate test (SSRT), non-destructive electrochemical noise (ECN), SEM and EIS techniques. The results showed that, during the elastic stress stage, the addition of S2- accelerated the breakdown of passivation film on the surface of P110 steel tensile specimen. There are many short duration current transients caused by metastable pits on ECN curves. The transformation time of metastable to stable pits is shortened significantly by the addition of S2- which not only promotes the growth of pits but the initiation of cracks from the stable pits under the action of tensile stress. Compared with the ECN spikes from metastable pits, the spikes associated to the advance of cracks are featured by longer average duration (about 400 s), stronger amplitude (40 mu A), and higher charge (about 4000 mu C). As a result, the susceptibility of P110 steel to SCC increases with S(2- )concentration, and the propagation of SCC is dominated by anodic dissolution characteristic of discontinuous advance.

Analysis of Electrochemical Noise Data of Stress Corrosion Cracking of High-Strength Carbon Steel in Acidified NaCl Solution

Electrochemical Noise Generation During Stress Corrosion Cracking of the High-Strength Aluminum AA 7075-T6 Alloy

Electrochemical Noise Detection for SCC Behavior for 2024-T351 Aluminium Alloy in Acid NaCl Solution

Early Identification of Stress Corrosion Cracking of P110 Low Alloy Steel in Downhole Fluid by Electrochemical Noise Measurement

Electrochemical noises of LC4, LY12 and pure Al in NaCl solution

Effect of Electrochemical Potential and Chloride Concentration on Stress Corrosion Cracking Behavior of 23co14ni12cr3mo Ultra-High Strength Steel in NaCl Solution

Characteristic of Acoustic Emission Signal from Stress Corrosion Cracking in Low-Carbon Nitrogen-Enhanced Stainless Steel

Electrochemical Potential Noise of 321 Stainless Steel Stressed under Constant Strain Rate Testing Conditions

Electrochemical Potential Noise of AISI Type 321 Stainless Steel under Stress in Acid Sulphate Solutions

Electrochemical noise features of pure aluminum during pitting corrosion in neutral NaCl solution

Electrochemical Noise of Stress Corrosion Cracking of P110 Tubing Steel in Sulphur-Containing Downhole Annular Fluid

Study of Pitting Corrosion on Mild Steel During Wet–dry Cycles by Electrochemical Noise Analysis Based on Chaos Theory

Environmentally assisted stress corrosion cracking behaviour of low alloy steel in SO 2 -containing NaCl solution

Environmentally assisted stress corrosion cracking behaviour of low alloy steel in SO2-containing NaCl solution

Effect of pH and applied stress on hydrogen sulfide stress corrosion behavior of HSLA steel based on electrochemical noise analysis

Stress Corrosion Cracking Investigation of High Co-Ni Secondary Hardening Ultra-High Strength Steel in Neutral 3.5 Wt% NaCl Solution

The stress corrosion cracking behavior of N80 carbon steel under a crevice in an acidic solution containing different concentrations of NaCl

Electrochemical Noise Analysis: An Approach to the Effectivity of Each Method in Different Materials

Electrochemical Noise Characteristics in Corrosion Process of Az91d Magnesium Alloy in Neutral Chloride Solution

Insights from electrochemical crack tip modeling of atmospheric stress corrosion cracking

Potentiostatic Electrochemical Noise Analysis of 2101 Lean Duplex Stainless Steel in 1 mol/L NaCl