Abstract:An investigation was carried out on the features of potential electrochemical potential noise of stressed AISI321 stainless steel in solution 0.5mol/L Na2SO4+5×10−3mol/L H2SO4 under constant-strain-rate-testing (CSRT) conditions. The results showed that the strained steel exhibited a white noise feature at low frequencies and the amplitude of potential fluctuation depended on elongation of the steel. Power spectral density (PSD) of the noise increased with increasing strain level. The noise level in the elastic region of the steel was relatively low, which increased with elongation. After the steel yielded, the electrochemical noise level became higher but it increased less significantly with increasing strain. In the fracture region, the potential noise reached the maximum level. In addition to the dependence of electrochemical noise on strain level, it was also found that the electrochemical noise level increased with increasing strain rate. To interpret the generation mechanism of electrochemical noise, a simple model was proposed based on an assumption that strain results in breakdown and repairing of the passive film on the steel. With this model, the dependence of electrochemical potential noise and its power spectral density on strain level and strain rate can be successfully explained.

Electrochemical Potential Noise of AISI Type 321 Stainless Steel under Stress in Acid Sulphate Solutions

Electrochemical Potential Noise of 321 Stainless Steel Stressed under Constant Strain Rate Testing Conditions

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Relationship Between the Martensite Phase Transition and Pitting Susceptibility of AISI-321 Stainless Steel in Acidic Solutions of NaCl

Potentiostatic Electrochemical Noise Analysis of 2101 Lean Duplex Stainless Steel in 1 mol/L NaCl

Effect Of Potential Perturbation Polarization On The Stress Corrosion Cracking Of Type 321 Stainless Steel

Inhibition Effects of L−and L2on Stress Corrosion Cracking of Stainless Steel in Acidic Chloride Solutions

Dynamic study on the anodic dissolution of 304 stainless steel with elastic stress in sodium chloride solution

Effect of NH4+ on the pitting corrosion behavior of 316 stainless steel in the chloride environment

Accelerating Effect and Critical Ph Value of Occluded Cell Corrosion Within Pits, Crevices, or Stress Corrosion Cracks

Study on stress corrosion behavior of 316L austenitic stainless steel in hot NaOH solution

Effect of pH and applied stress on hydrogen sulfide stress corrosion behavior of HSLA steel based on electrochemical noise analysis

CORROSION BEHAVIOR OF STAINLESS STEEL 304 AS WATER SUPPLY MATERIAL IN WATER CONTAINING CHLORIDE

Electrochemical noises of LC4, LY12 and pure Al in NaCl solution

Electrochemical noise features of pure aluminum during pitting corrosion in neutral NaCl solution

ELECTROCHEMICAL BEHAVIOR OF TYPE 304STAINLESS STEEL UNDER ALTERNATING ELECTRIC FIELD

Insights from electrochemical crack tip modeling of atmospheric stress corrosion cracking

Characteristic of Acoustic Emission Signal from Stress Corrosion Cracking in Low-Carbon Nitrogen-Enhanced Stainless Steel

Electrochemical corrosion and passive behavior of a new high-nitrogen austenitic stainless steel in chloride environment

Effect of mechanical stress on electrochemical corrosion of X65 carbon steel in CO2 saturated brine