Abstract:A wide range of chemical processes involves three phases, where common systems have inefficient mixing and mass transfer is limited. This study uses the oscillatory flow reactor with smooth periodic constrictions (OFR-SPC) according to the patent EP3057694 (B1) to evaluate its potential on O 2 mass transfer at high solids loading (10–50 % (v/v)). For that, the effect of solids (EPS, PVC) properties (concentration, density, and size) on the performance of the volumetric liquid-side mass transfer coefficient ( kLa ), gas holdup ( εG ) and Sauter mean bubble diameter ( d32 ) using several operational conditions (oscillation amplitude and frequency, superficial gas velocity) was assessed. Results show that oscillatory conditions can influence the solids effect on kLa . At solid load ( ≥ 30 % (v/v)) under low oscillations, kLa decreased, εG and d32 increased, slug flow regime emerged and the OFR-SPC behaved as fixed bed reactor. Contrary, no significant influence of solid properties on kLa , and εG was observed at higher oscillations, where the reactor behaved as fluidized bed in a homogeneous flow regime. Notably, solids' concentration (<30 % (v/v)), size and density revealed a negligible influence on mass transfer for all range of oscillations, contrary to the widespread consensus where kLa tends to decrease in conventional reactors at lower solid's load (<15 % (v/v)), making the OFR-SPC a valuable resource for catalytic processes. The OFR-SPC demonstrated higher mass transfer rates (∼3 − fold) than conventional multiphase devices with reasonable power consumption (∼100 W/m −3 (−|-)). These are remarkable results, which indicate the OFR-SPC for three-phase industrial processes intensification.

Impact of nozzle operation on mass transfer in jet aerated loop reactors. Characterization and comparison to an aerated stirred tank reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Investigation of Mass Transfer of Ozone in Jet Loop Reactor

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Oxygen Transfer Characteristics in a Pilot-Scale Airlift Internal-Loop Bioreactor for Simultaneous Partial Nitrification and Anaerobic Ammonia Oxidation

Hydrodynamics and Mass Transfer in an Airlift Loop Reactor: Comparison between Using Two Kinds of Spargers

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Local Overall Volumetric Gas-Liquid Mass Transfer Coefficients in Gas-Liquid-Solid Reversed Flow Jet Loop Bioreactor with A Non-Newtonian Fluid

Effect of high solids loading on gas–liquid mass transfer in an oscillatory flow reactor for process intensification

Development of modified airlift reactor (MALR) for improving oxygen transfer: optimize design and operation condition using ‘design of experiment’ methodology

Jet Associated Multi-Stage Air-Lift Loop Reactor:Hydrodynamics and Mass Transfer

The study on mass transfer characteristics of the intensified gas-liquid jet stirred reactor

Using in-line static mixers to intensify gas–liquid mass transfer processes

Influence of Sparger Type on Mass Transfer in a Pilot-Scale Internal Loop Airlift Reactor

Analysis and Measurement of Mass Transfer in Airlift Loop Reactors

Characterization of a pilot plant airlift tower loop reactor: III. Evaluation of local properties of the dispersed gas phase during yeast cultivation and in model media

The Effects of Structure Characteristics of External Airlift Loop Reactor on Mass Transfer Behaviour