Abstract:The effects of different spargers on the hydrodynamics and mass transfer of an airlift loop reactor were investigated. The gas holdup, liquid loop velocity, and volumetric mass transfer coefficient of the reactor were tested using a ring orifice distributor and a jet nozzle. The study was conducted in a 6 m high airlift loop reactor at a superficial gas velocity of 0.01~0.04 m/s, and the superficial liquid velocity was maintained at 0.0154 m/s. The results showed that using the jet nozzle provided a higher gas holdup, liquid loop velocity, and mass transfer. When the superficial gas velocity was less than 0.0325 m/s, the liquid loop velocity generated by the jet nozzle was approximately 1.1-fold higher than that generated by the ring orifice distributor, and the disparity in gas holdup between the riser and downcomer enhanced the power of liquid circulation. When the superficial gas velocity was more than 0.0325 m/s, the jet kinetic power dominated the improvement in the liquid loop velocity, and the energy input from the nozzle to the airlift loop reactor was greater than 10.8 J/(s·m2). This indicated a threshold of energy input for overcoming the friction loss. In this situation, the liquid loop velocity in the jet form increased considerably, thus favoring the mixing performance and temperature uniformity of the reactor. It was also of significance for avoiding the formation of a flow dead zone in scale-up airlift loop reactors.

Influence of Sparger Type on Mass Transfer in a Pilot-Scale Internal Loop Airlift Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Hydrodynamics and Mass Transfer in an Airlift Loop Reactor: Comparison between Using Two Kinds of Spargers

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Hydrodynamic Character of Internal-Loop Airlift Reactor

Gas Holdup, Bubble Behavior and Mass Transfer in A 5 M High Internal-Loop Airlift Reactor with Non-Newtonian Fluid

Hydrodynamic Behavior in Three-Phase External Loop Airlift Reactors

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Flow Behavior and Mass Transfer in Three-Phase External-Loop Airlift Reactors with Large Particles

STUDY ON THE HYDRODYNAMICS AND TRANSFER PROPERTIES OF INDUSTRIAL AIRLIFT REACTORS

Characteristics of Bubbly Flow, Mass Transfer, and CO 2 Absorption in a Two-Stage Internal Loop Airlift Reactor Assembly with a Diamond-Shaped Guide Baffle

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

The Effects of Structure Characteristics of External Airlift Loop Reactor on Mass Transfer Behaviour

Influence of the Gas Distributor on the Local Hydrodynamic Behavior of an External Loop Airlift Reactor

Investigation of the Gas Layer Height in a Multistage Internal-Loop Airlift Reactor

Hydrodynamic and mass transfer characteristics of external-loop airlift reactors without an extension tube above the downcomer

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Research on Mass Transfer Coefficient Measurement Model of External-Loop Airlift Reactor