Abstract:The effects of different spargers on the hydrodynamics and mass transfer of an airlift loop reactor were investigated. The gas holdup, liquid loop velocity, and volumetric mass transfer coefficient of the reactor were tested using a ring orifice distributor and a jet nozzle. The study was conducted in a 6 m high airlift loop reactor at a superficial gas velocity of 0.01~0.04 m/s, and the superficial liquid velocity was maintained at 0.0154 m/s. The results showed that using the jet nozzle provided a higher gas holdup, liquid loop velocity, and mass transfer. When the superficial gas velocity was less than 0.0325 m/s, the liquid loop velocity generated by the jet nozzle was approximately 1.1-fold higher than that generated by the ring orifice distributor, and the disparity in gas holdup between the riser and downcomer enhanced the power of liquid circulation. When the superficial gas velocity was more than 0.0325 m/s, the jet kinetic power dominated the improvement in the liquid loop velocity, and the energy input from the nozzle to the airlift loop reactor was greater than 10.8 J/(s·m2). This indicated a threshold of energy input for overcoming the friction loss. In this situation, the liquid loop velocity in the jet form increased considerably, thus favoring the mixing performance and temperature uniformity of the reactor. It was also of significance for avoiding the formation of a flow dead zone in scale-up airlift loop reactors.

Jet Associated Multi-Stage Air-Lift Loop Reactor:Hydrodynamics and Mass Transfer

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Investigation of hydrodynamic performance in a staggered multistage internal airlift loop reactor

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Multiphase flow characteristics of a novel internal-loop airlift reactor

Simulation And Experimentation On The Gas Holdup Characteristics Of A Novel Oscillating Airlift Loop Reactor

Gas Holdup and Liquid Circulation Velocity in Gas-Liquid Two Stage Internal Loop Airlift Reactor

Hydrodynamics and Mass Transfer in an Airlift Loop Reactor: Comparison between Using Two Kinds of Spargers

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Liquid Circulation in A Multi-Tube Air-Lift Loop Reactor

LOCAL LIQUID SIDE MASS TRANSFER MODEL IN AIRLIFT LOOP REACTOR AND SELF-ASPIRATED REVERSED FLOW JET LOOP REACTOR

Hydrodynamics and Bubble Behaviour in a Three-Phase Two-Stage Internal Loop Airlift Reactor

Local hydrodynamics modeling of a gas-liquid-solid three-phase airlift loop reactor

Hydrodynamics and mass transfer in a slurry external airlift loop reactor integrating mixing and separation

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Characteristics of Bubbly Flow, Mass Transfer, and CO 2 Absorption in a Two-Stage Internal Loop Airlift Reactor Assembly with a Diamond-Shaped Guide Baffle