Abstract:In this study, we employed a solid-state reaction method to synthesize Ca0.25Cu0.75-xAlxTiO3 ceramics, investigating the impact of Al doping at concentrations of x=0 and 0.0125. Notably, all ceramics exhibited a primary phase of Ca0.25Cu0.75TiO3. The addition of Al3+ induced a significant increase in grain size. Density functional theory analyses revealed a preferential occupation of Cu sites by Al, leading to liquid-phase sintering processes attributed to excess Cu. Moreover, it was also found from DFT that the Al dopant cannot induce an oxygen vacancy in the lattice. Charge density analysis revealed that Cu+ and Ti3+ observed via XPS originate from the presence of an oxygen vacancy. The Ca0.25Cu0.7375Al0.0125TiO3 ceramic exhibited a very high dielectric permittivity of 9.23×104 and a low dielectric loss tangent of 0.057 at 1 kHz and room temperature. Importantly, the dielectric permittivity exhibited impressive stability over a temperature range of -60 °C to 110 °C, perfectly meeting the practical requirements for utilization in X6R ceramic capacitors. Our investigation indicates that the improved dielectric properties may be attributed to enhanced grain boundary responses, influenced by oxygen enrichment and the presence of metastable insulating layers at grain boundaries. Combining experimental findings with theoretical evidence, our study elucidates that the excellent dielectric properties of the Ca0.25Cu0.7375Al0.0125TiO3 ceramic originate from an extrinsic effect arising from grain boundary enhancement. This work not only contributes to advancing the understanding of the underlying mechanisms governing dielectric behavior in doped ceramics, but also emphasizes the potential of Ca0.25Cu0.7375Al0.0125TiO3 as a promising material for applications demanding superior dielectric performance.

Very high thermal stability with excellent dielectric, and non-ohmics properties of Mg-doped CaCu3Ti4.2O12 ceramics

Excellent-Δε′, very low-tanδ, giant-ε′ and nonlinear J–E properties of Zn2+-doped CaCu3Ti4.1@4.2O12 ceramics

Ultra-high quality factor of Mg6Ti5O16-based microwave dielectric ceramics with temperature stability

Structure and high temperature dielectric properties of Dy and Al co-doped CaTiSiO5 ceramics

Dielectric Properties of the Ca0.25Cu0.75-xAlxTiO3 Ceramics: Experimental and Computational Investigations

Medium Temperature Sintered BaTiO3-based Ceramics for X8R Capacitors

Temperature Stable and High-Q Microwave Dielectric Ceramics in the Li2Mg3−Ca TiO6 System (X=0.00–0.18)

Synergistic optimization of nonlinear current–voltage characteristics and dielectric properties in Mg-doped CaCu3Ti4O12-Y2/3Cu3Ti4O12 composites

Effect of Mg on the Dielectric and Electrical Properties of BaTiO 3 -Based Ceramics

Temperature-stable dielectric ceramics with nominal composition of Ca6Ti2Ta8O30

Enhanced Giant Dielectric Response in Mg-substituted CaCu3Ti4O12 Ceramics

Influence of CaTiO3 Doping on the Microwave Dielectric Properties of Li2MgTiO4 Ceramics

Improved Microwave Dielectric Properties of CaMgSi2O6 Ceramics Through CuO Doping

Effects of Magnesium–Tungsten Co-Substitution on Crystal Structure and Microwave Dielectric Properties of CaTi1-x(Mg1/2W1/2)xO3 Ceramics

New BST -Based Ceramics for High Voltage Capacitors

Temperature Compensating Microwave Dielectric Based on the (mg 0.97 Co 0.03 ) 2 (ti 0.95 Sn 0.05 )O 4 –catio 3 Ceramic System

High relative permittivity, low dielectric loss and good thermal stability of BaTiO 3 -bi(Mg 0.5 Zr 0.5 )O 3 solid solution

Low-loss and Temperature Stable (1-X)ba3p2o8-xmg2b2o5 Composite Ceramics with Low Sintering Temperature

A Temperature Stable (ba1–ce )(ti1–/2mg/2)o3 Lead-Free Ceramic for X4D Capacitors

Dielectric Properties and IV Characteristic of CaCu_3Ti_4O_(12)-MgTiO_3 Composite Ceramic Synthesized by Sol-Gel Method

High-temperature stable dielectrics in Mn-modified (1-x) BiNaTiO-xCaTiO ceramics