Abstract:With the development of 5G/6G communication, the requirements of portable devices for miniaturization and multifunction make low-temperature co-fired ceramic (LTCC) more and more important. In the area of high-frequency high-density passive integration, microwave dielectric ceramics with a low dielectric loss and high thermal conductivity are urgently needed to ensure the effective signals transmission and system reliability. However, most microwave dielectric ceramics with a low dielectric loss were not applicable for the LTCC technology due to the high sintering temperature. In this work, a series of MgO-based ceramics [(100 - x) wt.% MgO-x wt.% (0.2SrF(2)-0.8LiF) (x = 5,7,10)] were prepared by solid-state reaction method. The addition of sintering aid 0.2SrF(2)-0.8LiF (S2L8) decreased the sintering temperature below 880 degrees C without degrading the microwave dielectric properties of ceramics. Microwave dielectric properties of ceramics, including quality factor Q x f, relative permittivity epsilon(r), and temperature coefficient of resonant frequency tau(f), were investigated to find the optimum composition and sintering temperature. In general, MgO-7 wt.% S2L8 ceramic sintered at 860 degrees C exhibits outstanding properties of Q x f = 180 233 GHz, epsilon(r) = 9.11, tau(f) = -40.33 ppm/degrees C, and a high thermal conductivity of 24.02 W/(m K). This series of ceramics are suitable to be co-fired with Ag electrodes. With all those great properties, this series of MgO-based ceramics are expected to be the candidates for LTCC applications in 5G/6G technology.

Ultra-high quality factor of Mg6Ti5O16-based microwave dielectric ceramics with temperature stability

Effects Of Catio(3)On Microstructures And Properties Of (1-X) Znal2o4-Xmg(2) Tio4 (X=0.1) Microwave Dielectric Ceramics

Influence of CaTiO3 Doping on the Microwave Dielectric Properties of Li2MgTiO4 Ceramics

Temperature Stable Dielectric Properties of Mg2TiO4–MgTiO3–CaTiO3 Ceramics over a Wide Temperature Range

Ti4+ Modified Mgzrnb2o8 Microwave Dielectric Ceramics With An Ultra-High Quality Factor

Low temperature sintered Li6MgTiNb1-xVxO8F microwave dielectric ceramics with high-quality factor

High quality factor microwave dielectric ceramics in the (Mg1/3Nb2/3)O2–ZrO2–TiO2 ternary system

Temperature Stable and High-Q Microwave Dielectric Ceramics in the Li2Mg3−Ca TiO6 System (X=0.00–0.18)

Low-temperature sintering and microwave dielectric properties of CaF2-doped MgTiO3 ceramics

Study on the microwave dielectric properties of 0.84MgNb2-x(Ti1/2W1/2)xO6-0.16CaTiO3 ceramic

High-Qf value and temperature stable Zn2+-Mn4+ cooperated modified cordierite-based microwave and millimeter-wave dielectric ceramics

Temperature Stability and High-Qf of Low Temperature Firing Mg2SiO4–Li2TiO3 Microwave Dielectric Ceramics

Microwave dielectric properties and phase evolution of Zn-excess Mg0.95Zn0.05+xTiO3+x (x = 0–0.1) ceramics

Crystal structure and ultra-high quality factor of MgTi1-(Co1/3Nb2/3) O3 solid-solution microwave ceramics

Ultra low loss (Mg 1 − x Ca x ) 2 SiO 4 dielectric ceramics (x = 0 to 0.15) for millimeter wave applications

Low‐temperature‐sintered MgO‐based Microwave Dielectric Ceramics with Ultralow Loss and High Thermal Conductivity

Crystal structure and ultra-high quality factor of MgTi<sub>1-x</sub>(Co<sub>1/3</sub>Nb<sub>2/3</sub>)xO<sub>3</sub> solid-solution microwave ceramics

Spinel-trirutile Microwave Dielectric Ceramics with High Q and Excellent Temperature Stability Based on MgO-Al2O3-Ta2O5 Ternary Systems

Enhanced microstructure and dielectric properties of low-temperature sintered MgO-xwt%LiF ceramics for high-frequency applications

Ultra-high Quality Factor and Low Dielectric Constant of (zn0.5ti0.5)3+ Co-Substituted MgAl2O4 Ceramic