Abstract:This research investigates experimental methods used to extract and quantify meso-scale strain partitioning of five different advanced high strength steels (AHSS), using in-situ uniaxial tensile testing within a SEM. A slightly notched uniaxial tensile specimen was developed to ensure that localisation (necking) occurred in the middle of the specimen where SEM images of the deformed microstructures were captured. Micro digital image correlation (μDIC) was conducted using the etched microstructure up to high nominal strain of ∼0.5 within the neck. The effect of step size, subset size and SEM magnification were investigated to produce the highest resolution strain distribution contours. The strain distribution throughout the microstructure was extracted from 10,000× magnification micrographs and a method was developed to quantify the average strain partitioning for every level of nominal strain imposed during the tensile test. The high strength differential between ferrite and martensite grains within two dual-phase steels (DP800, DP980GI), resulted in a high level of average strain partitioning that increased linearly with respect to the applied nominal strain. The three-phase (martensite-bainite-ferrite) CP980 steel had a similar (to DP) level of strain partitioning at low nominal strains, but as deformation within the neck increased, the rate of strain partitioning decreased due to the presence of the moderate strength bainite grains. Single-phase MS1500 (martensite) and TWIP (retained austenite) exhibited low average strain partitioning levels due the single-phase and large grain size microstructures of these materials. The average strain partitioning ratio was shown to be ∼1 for the dual-phase steels, and reduced to 0.45 for the highest ductility TWIP material.

Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effect of Welding Heat Input on Simulated HAZ Areas in S960QL High Strength Steel

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Experimental Research of Transformation Plasticity for Q460D Steel

A Coupled Electrical–Thermal–Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature

Inverse Finite Element Modelling and Identification of Constitutive Parameters of UHS Steel Based on Gleeble Tensile Tests at High Temperature

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model

Material Behavior Description for a Large Range of Strain Rates from Low to High Temperatures: Application to High Strength Steel

Tensile Tests for Material Characterisation of High- and Ultra-High-Strength Steels S690QL and S960QL under Natural Fire Conditions

Finite Element Modelling of Tensile Test for Micro-Alloyed Low Carbon Steel at High Temperature

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Effect of previous heating treatments conditions and gas metal arc welding (GMAW) on mechanical and microstructural properties of HSLA steel DOMEX 460MC

Use of Gleeble MAXStrain Unit for Study of Damage Development in Hot Forging

Strain partitioning characterization of advanced high strength steels using in-situ tensile tests with Micro digital image correlation – Methodology and analysis

Critical LME elongation: a criterion measured with Gleeble correlated to LME sensitivity during spot welding

Sensitivity Analysis of History Dependent Material Mechanical Models for Numerical Simulation of Welding Process

Experimental and Numerical Analysis of Fracture Mechanics Behavior of Heterogeneous Zones in S690QL1 Grade High Strength Steel (HSS) Welded Joint

Determination of Grain Growth Kinetics of S960MC Steel