Abstract:<p>Sheet metal forming processes and their simulations often require knowledge of both anisotropic yield and hardening constitutive parameters. The identification of these properties, however, involves a large number of homogeneous tests as well as various expensive testing machines. In this paper, a novel method is proposed to enable a simultaneous identification of the multiple anisotropic yield and hardening constitutive parameters from a single test and using the simplest uniaxial testing machine, which significantly simplifies the conventional complex constitutive identification procedures. In particular, the test configuration is elaborately designed to exhibit both heterogeneous stress states and insignificant buckling under compressive loadings based on the plate buckling theory. The virtual fields method is adopted as the inverse problem solution for the selected anisotropic yield and hardening laws, namely, Hill1948 and the nonlinear kinematic hardening models. The proposed identification scheme is first validated through the simulated full-field strain and load data of the designed bridge-like test configuration. Its identification sensitivity is analyzed with respect to the influences of measurement noise, type and combination of virtual fields. The results show that using the designed test configuration it is possible to identify all the target anisotropic parameters from a single test despite a noticeable level of error. This however can be markedly improved by combining the two tests performed in the rolling and transverse directions, and with the multiple virtual fields constraints, from which accurate and robust identification results are obtained for the selected models. The validity of this method is then illustrated experimentally with the application on the wrought magnesium alloy AZ31B sheet specimens. Finally, potential improvements and applications of this method are suggested.</p>

Inverse Finite Element Modelling and Identification of Constitutive Parameters of UHS Steel Based on Gleeble Tensile Tests at High Temperature

A Coupled Electrical–Thermal–Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature

Finite Element Modelling of Tensile Test for Micro-Alloyed Low Carbon Steel at High Temperature

Use of Instrumented Micro-Indentation to Study the Mesoscopic Elasto-Plastic Behavior of Gh4145/Sq Superalloy During High-Temperature Cyclic Straining

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

Identification of the Constitutive Model Parameters by Inverse Optimization Method and Characterization of Hot Deformation Behavior for Ultra-Supercritical Rotor Steel

Nonlinear mechanical response of UHSS rectangular plate under thermo-mechanical-metallurgical coupling

Genetic-Algorithm-Based Inverse Optimization Identification Method for Hot-Temperature Constitutive Model Parameters of Ti6Al4V Alloy

High-Temperature Deformation Characteristics and Constitutive Model of an Ultrahigh Strength Steel

Experimental investigation of cold-formed steel material at elevated temperatures

Constitutive modeling and analysis on high-temperature flow behavior of 25 steel

Temperature Dependence of Meso Constitutive Parameters for Advanced High-Strength Steel

Constitutive Modeling and Dynamic Recrystallization Mechanisms of an Ultralow-carbon Microalloyed Steel During Hot Compression Tests

Inverse Identification Method for Determining Stress–strain Curves of Sheet Metals at High Temperatures

Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL

Material Behavior Description for a Large Range of Strain Rates from Low to High Temperatures: Application to High Strength Steel

Characterization of Hot Deformation behavior for Ultra-High Strength (UHS) Steel containing Tungsten

A method for the simultaneous identification of anisotropic yield and hardening constitutive parameters for sheet metal forming

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Influence of test parameters on the high-temperature material properties of G550 CFS