Abstract:We propose a probabilistic model coupling with the temperature dependent constitutive relationship to describe the competition between the cleavage and ductile void failure of ferritic/martensitic steels with irradiation effects. It is found that both the material deformation and failure modes exhibit significant temperature dependence. Regarding the material deformation, two regimes have been found for the ductile-to-brittle transition (DBT). At low temperature, the flow stress is controlled by the mobility of screw dislocations. The high-temperature regime is about the thermally activated jog drag of dislocations. The failure modes depend on the carbide precipitate and temperature. Cleavage micro-cracks initiate at the carbide sites at low temperature giving rise to brittle behaviors. At high temperature, void nucleation evolving from the carbide precipitate suppresses the cleavage nucleation and propagation, and leads to good ductility. It is demonstrated that the competition between the cleavage fracture and ductile void failure is the major mechanism for the DBT. Our probabilistic model successfully predicts the temperature-dependent fracture toughness and ductile-to-brittle transition temperature (DBTT). Besides temperature, irradiation has a significant effect on the DBT of steels. Upon irradiation, the steels exhibit both irradiation hardening and irradiation embrittlement, i.e., rise in yield and flow stresses, and increase on DBTT. The main reason for these irradiation effects is that the irradiation-induced hardening increases the flow stress, and the plasticity localization weakens the overall hindering effect from ductile void growth on the cleavage nucleation and propagation, promoting the development of cleavage. Our probabilistic model takes into account the cleavage nucleation-propagation process and the influence of ductile void growth simultaneously, and it gives a sound explanation for the fundamental relation between the DBTT and mechanical properties of metallic materials.

Temperature Dependence of Meso Constitutive Parameters for Advanced High-Strength Steel

Temperature Dependency of Modified Mohr–Coulomb Criterion Parameters for Advanced High Strength Dual-Phase Steel DP780

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Mesoscopic Criteria of Fracture for Advanced High-Strength Dual-Phase Steel Sheet

Unified thermomechanical model of Ti-6Al-4V titanium alloy considering microstructure evolution and damage fracture under different stress state

Effect of Welding Defects on Mechanical Properties of Welded Joints Subjected to Temperature

Research on mesoscopic damage evolution models of TC4 titanium alloy under hot deformed process

Experimental and Numerical Investigation of Ductile Fracture of Carbon Steel Structural Components

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

A rate-dependent damage mechanics model for predicting plasticity and ductile fracture behavior of sheet metals at high strain rates

Temperature-Dependent Deformation and Fracture Properties of Low-Carbon Martensitic Steel in Different Stress States

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

Fracture behavior of high-strength steels at elevated temperatures

A Coupled Electrical–Thermal–Mechanical Modeling of Gleeble Tensile Tests for Ultra-High-Strength (UHS) Steel at a High Temperature

Phase field study of heat treatment and strengthening in maraging steels

Finite Element Modelling of Tensile Test for Micro-Alloyed Low Carbon Steel at High Temperature

Material Parameters in the GTN Model for Ductile Fracture Simulation of G20Mn5QT Cast Steels

Probabilistic and Constitutive Models for Ductile-to-brittle Transition in Steels: A Competition Between Cleavage and Ductile Fracture

Fracture Prediction of Powder Metallurgical Fe–Cu–C Steel at Elevated Temperatures Via Finite Element-Aided Hot Tensile Tests

Deformation and Damage Behavior of a 1Cr-Cast Steel Under Multiaxial Loading at Elevated Temperatures

Experimental investigation on mechanical behaviours of TMCP high strength steel