Abstract:As a wide bandgap semiconductor material, silicon carbide has promising prospects for application. However, its commercial production size is currently 6 inches, and the difficulty in preparing larger single crystals increases exponentially with size increasing. Large-size single crystal growth is faced with the enormous problem of radial growth conditions deteriorating. Based on simulation tools, the physical field of 8-inch crystal growth is modeled and studied. By introducing the design of the seed cavity, the radial temperature difference in the seed crystal surface is reduced by 88% from 93 K of a basic scheme to 11 K, and the thermal field conditions with uniform radial temperature and moderate temperature gradient are obtained. Meanwhile, the effects of different processing conditions and relative positions of key structures on the surface temperature and axial temperature gradients of the seed crystals are analyzed in terms of new thermal field design, including induction power, frequency, diameter and height of coils, the distance between raw materials and the seed crystal. Meanwhiles, better process conditions and relative positions under experimental conditions are obtained. Based on the optimized conditions, the thermal field verification under seedless conditions is carried out, discovering that the single crystal deposition rate is 90% of that of polycrystalline deposition under the experimental conditions. Meanwhile, an 8-inch polycrystalline with 9.6 mm uniform deposition was successfully obtained after 120 h crystal growth, whose convexity is reduced from 13 mm to 6.4 mm compared with the original scheme. The results indicate that the optimized conditions can be used for single-crystal growth.

The growth of alkali halide cesium iodide single crystal in five zone furnace by Bridgman method

In-situ Growth of ZSM-5 Crystals on the Surface of High Temperature Alloy Substrates

Modified vertical Bridgman method: Time and cost effective tool for preparation of Cs2HfCl6 single crystals

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Growth of KAlF4 and Na5Al3F14 Aluminum Fluoride Single Crystals by Bridgman Method

Numerical Investigation of the VB Growth of CaF2 Crystal with Supercooled Crucible Wall

Industrial growth and characterization of Si‐doped GaAs crystal by a novel multi‐crucible Bridgman method

Generation of Carbon and Oxygen in CZ Elemental Crystal Furnace and the Influence of Monocrystalline Silicon Growth

Scintillation properties of<i> Cs3Cu2I5:Tl</i> crystals grown by Cz, EFG and Bridgman methods with a multifunctional melt growth furnace

Growth Of Different Crystals Using A Modified Bridgman System

Optimization of thermal field of 150 mm SiC crystal growth by PVT method

Floating zone furnace equipped with a high power laser of 1kW composed of five smart beams

Optimization of C60 crystal growth

Single Crystal Horizontal Bridgman Method

Nd:YAG single crystals grown by floating zone method in laser furnace

Recent Progress of Floating-Zone Techniques for Bulk Single-Crystal Growth

Experimental Investigation of NH4Cl-H2O Eutectic Solution Solidification for Simulating Crystal Growth with Bridgman Method

Influence of Inner Crucible Radius Variation on the Thermal Field and Oxygen Transport in the Melt During the Growth of Silicon by Continuous Czochralski Method

Crystal Growth of High-Purity Multicrystalline Silicon Using A Unidirectional Solidification Furnace for Solar Cells

Shape-controlled crystal growth of Y$_3$Al$_5$O$_{12}$:Ce single crystals with application of micro-pulling-down method and Mo crucibles, and their scintillation properties

Design and Optimization of Thermal Field for PVT Method 8-Inch SiC Crystal Growth