Abstract:How processing solvents influence the overall photovoltaic performances of polymer solar cells (PSCs) remains unclear in various recently emerged new material systems. Here we systematically studied this issue by integrating an extensively used poly (3-hexylthiophene) (P3HT), or a recently developed conjugated polymer P2F-EHp, with different non-fullerene acceptors. The P3HT based devices processed with the non-halogenated solvent, 2-methylanisole in presence of 1-methylnaphthalene as solvent additive, exhibit reduced bimolecular and trap-assisted monomolecular recombination, facile charge extraction and enhanced charge carrier mobilities. Morphological investigation reveals that the optimizing crystallites, phase purity as well as nanofibrous structure is effective to the enhancement of charge generation and transport. Note that P3HT:O-IDTBR based devices processed with these non-halogenated solvents exhibit an impressive power conversion efficiency of 7.1% with a high fill factor of 75.09% on a device area of 0.05 cm2, and the efficiency remained 6.89% even in a device with large active layer area of 1 cm2 with promising thermal stability. It is also noted that efficient PSCs consisting of P2F-EHp and non-fullerene acceptors of IT-4F and IT-4Cl were developed via optimizing non-halogenated toluene:o-xylene co-solvent. The detailed investigation of film morphology demonstrated that the co-solvent appeared to assist the manipulation of crystal coherent lengths and effectively decrease the phase separation of the corresponding blend films. Of particular importance is that this material system is compatible with the low-cost blade-coating technique and can be processed under ambient conditions without post-treatment. A remarkable power conversion efficiency of 10.1% was achieved by blade-coating the P2F-EHp:IT-4F:IT-4Cl blends in air. The results indicated that using non-halogenated solvents is a promising candidate for constructing efficient PSCs toward practical applications.

Efficient Polymer Solar Cells with Open-Circuit Voltage of 1.01 V and Power Conversion Efficiency of 8.09%

Suppressing Non-Radiative Loss Via a Low-Cost Solvent Additive Enables High-Stable All-Polymer Solar Cells with 16.13% Efficiency

11.2% Efficiency All-Polymer Solar Cells with High Open-Circuit Voltage

All‐polymer solar cells with over 16% efficiency and enhanced stability enabled by compatible solvent and polymer additives

Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

All-Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane-Functionalized Side Chains with Efficiency over 10.

All-polymer solar cells based on a novel narrow-bandgap polymer acceptor with power conversion efficiency over 10%

High-performance Nonfullerene Polymer Solar Cells with Open-Circuit Voltage over 1 V and Energy Loss As Low As 0.54 Ev

Nonhalogenated‐Solvent‐Processed High‐Performance All‐Polymer Solar Cell with Efficiency over 14%

Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells

8.0% Efficient All-Polymer Solar Cells with High Photovoltage of 1.1 V and Internal Quantum Efficiency near Unity

All-Polymer Solar Cells Based on A Blend of Poly[3-(10-N-Octyl-3-Phenothiazine-Vinylene)Thiophene-Co-2,5-Thiophene] and Poly[1,4-Dioctyloxyl-P-2,5-Dicyanophenylenevinylene]

23% Enhanced Efficiency of Polymer Solar Cells Processed with 1-Chloronaphthalene As the Solvent Additive

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Efficient polymer solar cells with a high open circuit voltage of 1 volt

High performance all-polymer solar cells enabled with solvent and solid dual additives

Optimization Of Processing Solvent And Film Morphology To Achieve Efficient Non-Fullerene Polymer Solar Cells Processed In Air

Improving Efficiency of Non-Fullerene Polymer Solar Cells by Using Non-Halogenated Solvents

Highly Efficient All‐Polymer Solar Cells Processed from Nonhalogenated Solvents

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency