Abstract:The diluted layer‐by‐layer (N‐LBL) strategy is employed to fabricate all‐polymer solar cells (all‐PSCs). Such film‐forming strategy combined the advantage of traditional bulk‐heterojunction and LBL methods, and thus exhibited suitable donor–acceptor interfaces and optimal photon utilization behaviors. Consequently, a high short‐circuit current density over 26 mA cm−2 and promising power conversion efficiencies of 18.33% are realized for N‐LBL prepared all‐PSCs. Disordered polymer chain entanglements within all‐polymer blends limit the formation of optimal donor–acceptor phase separation, and thus the performance of all‐polymer organic solar cells (all‐PSCs). Considering the challenge and importance of morphology regulation in all‐PSCs, a diluted layer‐by‐layer (N‐LBL) strategy is thereby adopted to fine‐tuning the properties of all‐polymer blends. When comparing the traditional PM6:PY‐IT based bulk‐heterojunction (BHJ) film and PM6/PY‐IT layer‐by‐layer (LBL) film, the N‐LBL film, which is prepared from diluted PM6 (with 3% PY‐IT) bottom layer and diluted PY‐IT (with 6% PM6) top layer, displayed a clearer bi‐continuous fibrillar network and a higher exciton generation process. Benefiting from these unique characters, the all‐PSC consisting the N‐LBL active layer exhibited a short‐circuit current density over 26 mA cm−2 and a power conversion efficiency (PCE) of 18.33%, which are both higher than those of BHJ (16.88%) and LBL (17.13%) devices. Moreover, the universality of the dilution strategy in other all‐polymer blends (PM6 and PY‐DT, PM6 and PY‐FT‐o) is also demonstrated with unanimously improved device performance. This work underscores the effectiveness of the diluted layer‐by‐layer method in tuning the morphologies and charge dynamics for high‐performance all‐PSCs.

Polymer Solar Cells with 90% External Quantum Efficiency Featuring an Ideal Light- and Charge-Manipulation Layer.

High-Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping

High-Performance Fullerene-Free Polymer Solar Cells Featuring Efficient Photocurrent Generation from Dual Pathways and Low Nonradiative Recombination Loss

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Improved Efficiency and Stability in Polymer Solar Cells Using a Tetra-nuclear Zinc(II) Complex Interfacial Layer

Nonhalogenated‐Solvent‐Processed High‐Performance All‐Polymer Solar Cell with Efficiency over 14%

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

All‐polymer solar cells with over 16% efficiency and enhanced stability enabled by compatible solvent and polymer additives

Efficient Polymer Solar Cells with Open-Circuit Voltage of 1.01 V and Power Conversion Efficiency of 8.09%

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

All‐Polymer Solar Cells with 17% Efficiency Enabled by the "End‐Capped" Ternary Strategy

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method

A Multilayered Electron Extracting System for Efficient Perovskite Solar Cells

Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells

Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure

Single‐Junction Organic Photovoltaic Cell with 19% Efficiency

Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization