Abstract:Electrodeposition of titanium materials on substrates is an important technique to improve and functionalize the surface properties. Especially electrodeposition of titanium and titanium oxide on a material that is an insulator. However, electrodeposition of an insulator on another insulator is considered to be difficult. If such deposition can be accomplished, it would have a variety of practical applications in both mechanical and electronic industries. We are thus proposing a new method for electrodeposition of titanium oxide on alumina substrates in LiF-KF with the addition of TiO 2 and metal titanium. We have carried out the electrodeposition to test hypotheses on deposition of titanium oxide on the alumina surface by employing the three electrodes method in the molten salt. The nickel-wire in contact with alumina substrate was employed as a working electrode to grow titanium oxide on the substrate by the proposed electrochemical process. Titanium oxide deposition grew from the three-phase interface of nickel wire, molten salt and alumina substrate in a radial pattern. The growth rate of the deposition was controlled by adjusting the electrochemical parameters. We have also investigated the melt structure of LiF-KF with the addition of TiO 2 and the addition of bulk titanium by combining high temperature Raman spectroscopic technique and density functional theory calculations. These results provide new insight into the growth process of titanium oxide crystals and possibly a new comprehensive plating procedure for titanium oxide on insulator substrates.

Titanium Oxide Coatings Deposited on MnZn Ferrite by a Molten Salt Reaction

Stability Investigation of TiB2 Coatings in Molten Zinc Fabricated by Electrophoretic Deposition in Molten Salts

Mechanism of Titanium Deposition on Aln Surface by Molten Salt Reaction

Mechanism of Titanium Deposition on Al2O3 Ceramic Surface by Molten Salt Reaction

Titanium metallization of Si3N4 ceramics by molten salt reaction: Mechanism and interfacial structure

Mechanism of Titanium Coating on Si3n4 Ceramics by Molten Salt Reactions

Ti metallization on AlN ceramics surface by molten salt reaction

Surface Metallization on Ceramic Materials by Molten Salt Reations

Titanium metallization of Si3N4 ceramics by molten salt reaction: coating microstructure and brazing property

Fabrication and Characterization of Oxygen-Carbon-Contained CrMnFeCoNi Coatings Electrodeposited in DMF-CH3CN Solution with and Without Supporting Electrolyte LiClO4

Synthesis and Corrosion Resistance of High-Silica Zeolite MTW, BEA, and MFI Coatings on Steel and Aluminum

Molten salt synthesis of Ni 0.5Zn 0.5Fe 2O 4 ferrites

Formation of Titanium Oxide on Nonmetal Substrates and the Coordination Structure of Titanium Ions in Molten Lif-KF

Coating Formation on Ti-6Al-4V Alloy by Micro Arc Oxidation in Molten Salt

Electrochemical dissolution behavior of conductive TiCxO1–x solid solutions

An Investigation into Electrodeposited Co−Ni−TiO2 Films with Improved Mechanical and Corrosion Properties

Ti metallization of A1N surface by molten salt reaction

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Corrosion behavior of Ti powder enhanced potassium silicate coating with solid NaCl deposit in wet oxygen at 500 °C