Abstract:Abstract There are significant challenges for materials in extreme environments for a variety of applications such as aircraft engines, gas turbines, nuclear reactors, reentry vehicles, and hypersonic structures. Ceramic matrix composites (CMCs) could be ideal candidates to meet these stringent requirements for materials due to their high melting temperatures, high oxidation, corrosion and ablation resistance, low creep, and thermal cycling behavior in such extreme environments. Particularly, continuous fibers can bridge cracks in CMCs and therefore improve the strength and fracture toughness of composites. CMCs are traditionally manufactured by the melting infiltration method. With this method, the high porosity and brittle structure of fabricated CMCs are not capable of withstanding high mechanical and thermal loads. Alternatively, polymer derived ceramic composites are fabricated by incorporating carbon fibers into polymer derived ceramic matrix to achieve high fracture toughness. With the aid of protective coatings with metallic or ceramic materials, such as Nickel and boride nitride, carbon fiber could potentially withstand high temperatures without oxidation. In this study, continuous fiber reinforced silicon oxycarbide composite was manufactured with polysiloxane (PSX) resin and woven carbon fabrics through the polymer infiltration and pyrolysis process (PIP). Re-infiltration of the PSX resin into the composites, curing in an autoclave, and pyrolysis for additional 2 to 10 cycles can increase the yield of ceramics of the composites. A dense structure of the composites was observed by SEM. The EDS results showed that the elemental composition of the composites mainly consisted of carbon, silicon and oxygen. The crystalline structure of the composites was examined through XRD to indicate the degree of polymer pyrolysis to ceramics. The results of four-point bending testing of the composites showed a flexural strength of 62.17MPa, a flexural modulus of 51.30GPa, and a fracture toughness of 1.3 × 108J/m3.

Fabrication, microstructure, and mechanical properties of all-oxide ceramic matrix composites using high-yield precursors

Microstructures and Mechanical Properties of Engineered Short Fibre Reinforced Aluminium Matrix Composites

Preparation and Characterization of An All Oxide Ceramic Matrix Composite by A Novel Method

Matrix compositions and their impact on grain growth and strength of oxide ceramic composites

Processing and Characterization of Continuous Carbon Fiber Reinforced Silicon Oxycarbide Ceramic Matrix Composites

Effects of sintering temperature on mechanical properties of alumina fiber reinforced alumina matrix composites

Fabrication and Thermal Stability of Continuous Carbon Fiber Reinforced Alumina Matrix Composites via Sol–Gel Process

Al2O3f/Al2O3 composites with high bending strength prepared via a MnO2 modified slurry impregnation method

Mechanical Properties of Al Matrix Composite Enhanced by In Situ Formed SiC, MgAl2O4, and MgO via Casting Process

Structure and properties of fine diameter continuous SiC ceramic fiber reinforced Al matrix composites

Fabrication, microstructure and multi-scale mechanical properties of 2.5D oxide fiber reinforced oxide composites

Cf/SiC Ceramic Matrix Composites with Extraordinary Thermomechanical Properties up to 2000 °C

Improved Mechanical Properties of Al2O3-25 Vol% SiCw Composites Prepared by Oscillatory Pressure Sintering

Processing of Continuous Carbon Fibre Reinforced ZrB2-SiC Composite Through In-Situ Matrix Development

Microstructure and mechanical properties of a three‐dimensional oxide/oxide composite after long‐term thermal exposure

Microstructure and mechanical properties of Al2O3/Al2O3 composite densified through a slurry infiltration and sintering process

Additive manufacturing of fiber reinforced zirconia‐toughened alumina (ZTA) ceramic matrix composites (CMC) by material extrusion‐based technology

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties

Microstructure and Mechanical Properties of Hot-Pressed Al2O3–mullite–ZrO2–SiC Composites

Microstructural, Mechanical, and Tribological Characteristics of Ceramic Reinforced Al/Cu Hybrid Matrix Composites

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process