Abstract:Structures made of steel alloys with V-notches may fracture at the V-notch tip at which a small plastic zone usually evolves. Failure criteria for predicting fracture loads for such quasi-brittle alloys, as a function of the V-notch opening angle are very scarce and have not been validated, to the best of our knowledge, by a set of experimental observations.Herein we provide a database of experiments performed on AISI 4340 steel alloy specimens with three different V-notch opening angles and three different tempering temperatures, loaded in mode I. Material properties, failure load and plastic area at the V-notch tip are detailed.The experimental observations are used to investigate to which extent the finite fracture mechanics coupled criterion (FFMCC) for brittle materials may predict the failure load of quasi-brittle steel alloys, depending on the plastic zone size. Finite element analyses were used to compute the parameters required by the FFMCC. We compared the predicted versus the experimental fracture load for the different V-notch opening angles and tempering temperatures.For small opening angles (30°) for which the plastic area is very small, the FFMCC under-predicts the fracture load by about 20% which is within the experimental error range. The under-prediction of the failure load constantly increases to ∼ 50% as the V-notch angle increases to 90° and plastic zone area on the surface increases to ∼0.5mm2 (for a V-notch depth of 5 mm).The detailed experimental database is suggested to be used for validation purposes when new failure criteria for quasi-brittle materials are developed.

A concise review about fracture assessments of brittle solids with V-notches

A Semi-Analytical Quasi-Brittle Fracture Criterion for Elliptical Notches

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Experimental Studies on Fracture of Unidirectional Glass-Fibre-Reinforced Plastics Composites with V-Notch

Fracture assessments of blunt V-notches using the coherent gradient sensing (CGS) method

Failure Criteria for Brittle Notched Specimens

Dynamic brittle fracture in sharp V-notched rock specimens using digital image correlation method

Can the finite fracture mechanics coupled criterion be applied to V-notch tips of a quasi-brittle steel alloy?

Fracture characterizations of V-notch tip in PMMA polymer material

The single edge notch fracture test for viscoelastic elastomers

Notch Stress Intensity Factor and C-integral Evaluation for Sharp V-notch in Power-Law Creeping Solids

Fracture prediction in flat PMMA notched specimens under tension - effectiveness of the equivalent material concept and fictitious material concept

Estimation of Stress Field for Sharp V-notch in Power-Law Creeping Solids: an Asymptotic Viewpoint

Experimental and Theoretical Fracture Assessments of Blunt V-Notched Rock Samples Under SHPB Impact Loading

Evolution of fracture mechanics parameters relevant to narrow notch increment as a measure of fatigue damage accumulation

Revisiting Failure of Brittle Materials

Notch Insensitive Fracture In Nanoscale Thin Films

An Improved Semi-Analytical Solution for Stress at Round-Tip Notches

Experimental Study on Fracture Behavior of Adhesive-Bonded Structure with V-notch Based on Digital Gradient Sensing Method

Critical Fracture Criterion on Shells of Controlled Fragmenting Warhead with V-Notches on Their Inner Surface

Elastic and elastic–plastic fields on circular rings containing a V-notch under inclined loads