Abstract:In this paper the elastoplastic solutions with higher-order terms for apex V-notches in power-law hardening materials have been discussed. Two-term expansions of the plane strain and the plane stress solutions have been obtained. It has been shown that the leading-order singularity approaches the value for a crack when the notch angle is not too large. In plane strain cases the elasticity does not enter the second-order solutions when the notch opening angle is too small. For a large notch angle, the two-term expansions of the plane strain near-tip fields are described by a single amplitude parameter. The plane stress solutions generally contain the elasticity terms. The boundary layer formulations based on the small-strain plasticity theory confirm that a dominance zone exists ahead of the notch tip. Finite element results give good agreement to the asymptotic solutions under both plane strain and plane stress conditions. The second-order terms cannot improve the predictions significantly. The near-tip fields are dominated by a single parameter. Finite element calculations under the finite strain J2-flow plasticity theory revealed that the finite strains can only affect local characterization of the asymptotic solution. The asymptotic solution has a large dominance zone around the notch tip. For an apex notch bounded to a rigid substrate the leading-order singularity falls with the notch angle significantly more slowly than in the homogeneous material. It vanishes at the notch angle about 135° for all power-hardening exponents. The elasticity effects enter the second-order solutions when the notch angle becomes large enough. The tip fields are characterized by the hydrostatic stress and the shear stress ahead of the notch.

Notch Stress Intensity Factor and C-integral Evaluation for Sharp V-notch in Power-Law Creeping Solids

Estimation of Stress Field for Sharp V-notch in Power-Law Creeping Solids: an Asymptotic Viewpoint

Plane Stress Sharp V-notch Tip Field in Power-Law Creeping Solids

Three-dimensional Sharp V-notch Stress Intensity Factor and Strain Energy Rate Density under Creeping Conditions

Out-of-plane Effect on the Sharp V-notch Tip Fields in Power-Law Creeping Solids: A Three-Dimensional Asymptotic Analysis

On the Second Order Term Asymptotic Solution for Sharp V-notch Tip Field in Elasto-Viscoplastic Solids

A Higher-Order Asymptotic Solution for 3d Sharp V-Notch Front Tip Fields in Creeping Solids

Investigation on Fatigue Strength and Notch Effect of 17-4PH Blade Root

A concise review about fracture assessments of brittle solids with V-notches

An Analytical Approach for the Near‐Tip Field Around V‐Notch in Orthotropic Materials

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Analysis of Elastoplastic Sharp Notches

Geometry parameter method to estimate stress intensity in V-notched plate and a small crack ahead from V-notch apex

Assessment of notch fatigue and size effect using stress field intensity approach

Strict Upper and Lower Bounds of Stress Intensity Factors at 2D Elastic Notches Based on Constitutive Relation Error Estimation

Determination of notch stress intensity factors for V-notched specimens under mode I loading using the 3D-Digital image correlation and strain energy approach

An Improved Semi-Analytical Solution for Stress at Round-Tip Notches

A Structural Stress Approach Accounting for Notch Effects on Fatigue Propagation Life: Part I Theory

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Dynamic brittle fracture in sharp V-notched rock specimens using digital image correlation method

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect