Abstract:An elastoplastic solution with higher-order terms for cracks in materials exhibiting pressure-sensitive yielding and plastic volumetric deformation is presented in this paper. Two-term expansions of the plane strain and plane stress solutions for a crack in a homogeneous material are obtained. It is shown that a variable-separable solution form under plane strain conditions exists only for weakly pressure-sensitive materials and the limit values of the pressure-sensitivity factor depend on the strain-hardening exponent. The second-order plane strain terms have to be solved as an eigenvalue problem and the elastic terms enter the second-order solutions only when the material has substantial strain-hardening. It follows that the second stress amplitude factor must be determined by the applied load. The values of the second exponents in the stress expansion are slightly larger than zero for most hardening materials and behave as an increasing function of the pressure-sensitivity factor. The finite element computations confirm that the second-order terms under plane strain conditions will increase dominance of the asymptotic solution remarkably. The plane stress analysis shows that the amplitudes of both leading-order and second-order solution are determined by the J-integral for most pressure-sensitive dilatant materials. The variable-separable asymptotic solution exists for all available values of the pressure-sensitivity factor. Because of rapid changes in leading-order terms of the stress component 295-1 at ϑ≥160° the second-order solution will not significantly improve the prediction of the asymptotic solution in the whole tip field. Numerical results based on the incremental theory of plasticity show that the asymptotic solution characterizes the near-tip fields. Finite strains dominate in the region 295-2 under plane strain conditions. The two-parameter boundary layer formulation with different T-stresses predicts that the higher-order terms are only weakly dependent on the distance to the crack tip and vary significantly with ϑ in the forward sector.

Analysis of Elastoplastic Sharp Notches

On the Second Order Term Asymptotic Solution for Sharp V-notch Tip Field in Elasto-Viscoplastic Solids

Plane Stress Sharp V-notch Tip Field in Power-Law Creeping Solids

Complete elastic–plastic stress asymptotic solutions near general plane V-notch tips

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Estimation of Stress Field for Sharp V-notch in Power-Law Creeping Solids: an Asymptotic Viewpoint

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Elastoplastic Crack Analysis for Pressure-Sensitive Dilatant Materials ? Part I: Higher-order Solutions and Two-Parameter Characterization

Out-of-plane Effect on the Sharp V-notch Tip Fields in Power-Law Creeping Solids: A Three-Dimensional Asymptotic Analysis

Notch Stress Intensity Factor and C-integral Evaluation for Sharp V-notch in Power-Law Creeping Solids

Elastic and elastic–plastic fields on circular rings containing a V-notch under inclined loads

An Improved Semi-Analytical Solution for Stress at Round-Tip Notches

Singularity Stress Analysis Near the Tip of V-notch in Homogeneous Materials

Numerical and Experimental Analyses of Singular Electro-Elastic Fields Around a V-shaped Notch Tip in Piezoelectric Materials

A Higher-Order Asymptotic Solution for 3d Sharp V-Notch Front Tip Fields in Creeping Solids

Non-Propagating Cracks at the Fatigue Limit of Notches: An Analysis of Notch Sensitivity and Size Effect

Sub-region Mixed Finite Element Analysis of V-notched Plates

A concise review about fracture assessments of brittle solids with V-notches

A Semi-Analytical Quasi-Brittle Fracture Criterion for Elliptical Notches

Plane strain deformation near a crack tip in a power-law hardening material

The expression of stress and strain at the tip of three-dimensional notch