Abstract:Abstract This work investigates the effect of the notch on fatigue behavior by combining two methods: the extended finite element method (XFEM) and the averaged strain energy density (ASED) method, which considers the combined action of bending and shear loading. The ASED method has already been proven accurate for assessing the failure of components in the presence of sharp and blunt notches, and several results are available in the literature for different materials. These results were compared with those obtained from the experimental tests reported here. The main purpose of this study was twofold: The first part is an experimental study of fatigue in rotary bending of specimens weakened by U and V notches made of polymethyl-methacrylate (PMMA) material. Two values for the radius were used for the U-notches (0.2 and 2 mm) and two angles for the V-notches (20° and 140°). The second part of the study consisted of performing several simulation tests using the Cast3m software for different angles and radii. The local approach based on the mean value of the ASED acted over a finite-sized volume surrounding the highly stressed regions. The maximum principal stress located at the notch edge defined the center of the control volume. If the notch is blunt, the control volume assumes a crescent shape with its width measured along the notch bisector line. When the notch is considered pointed (V-notched) or is a crack, the control volume becomes a circle with its center at the notch tip. The presence of geometric discontinuities in structures affects their lifetime by reducing it, producing a high concentration of local energy around the notch tip. Good convergence was obtained between the numerical simulation and experimental results for the ASED in a finished zone surrounding the notch tip.

Evolution of fracture mechanics parameters relevant to narrow notch increment as a measure of fatigue damage accumulation

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Non-Propagating Cracks at the Fatigue Limit of Notches: An Analysis of Notch Sensitivity and Size Effect

Assessment of notch fatigue and size effect using stress field intensity approach

Fatigue life prediction of notched components under size effect based on strain energy density gradient

Fracture mechanics approach to fatigue crack initiation at uniaxially loaded notches

Modeling of fatigue crack growth from a notch

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

Requirements for stress gradient‐based fatigue assessment of notched structures according to theory of critical distance

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

Elasto-plastic fracture criterion for structural components with sharp V-shaped notches

Energy Field Intensity Approach for Probabilistic Notch Fatigue Assessment under Size Effect

Assessing variable amplitude multiaxial fatigue lifetime of notched components based on the notch critical plane approach

Evaluation of the fatigue life of AISI 347 specimens with small notches based on local strain considerations

Notch insensitivity in fatigue failure of chopped carbon fiber chip-reinforced composites using experimental and computational analysis

Notch Behavior of Components under the Stress-Controlled Creep-Fatigue Condition: Weakening or Strengthening?

A Local Approach for Fracture Analysis of V- Notch Specimens under Mode-I Loading

Probabilistic fatigue assessment of notched components under size effect using generalized weakest-link model