Abstract:Gears are one of the most significant machine elements in power transmission due to the many advantages such as high load capacity, long life, and reliability. Due to the increasing power and speed values, the characteristics expected from the transmission elements are also increasing. Significant changes occur in the dynamic behavior of the gears at high speed due to the resonance. For this reason, determining the resonance frequencies is becoming an important issue for designers. This paper presents a method for determining the resonance regions of the gear system under different design parameters. The main purpose of this study is to examine the effects of different gear design parameters on spur gear dynamics. For this aim, the effects of these parameters on the mesh stiffness and contact ratio are examined, and the interaction of mesh stiffness, contact ratio, and dynamic response is presented. Different mesh stiffness calculation methods used to calculate time-varying mesh stiffness and a parametric gear dynamic model are proposed. To solve the equations of motions, a computer program is developed in MATLAB software. Five different design parameters, which are teeth number, pressure angle, reduction ratio, profile shifting factor, addendum factor, and damping ratio, are taken into consideration. The dynamic factor variation is calculated for 1600 rpm a constant pinion speed for each parameter for a single mesh period. Furthermore, the dynamic factor is calculated for the pinion speed between 400–30000 rpm and the frequency response and the resonance regions of the gear system are defined. As a result of the study, the profile shifting and the addendum factor are the most effective two parameters on the gear dynamics. Also, the contact ratio and mesh stiffness have a great effect on the dynamic response of the system. The methods decreasing dynamic load factors are also discussed at the end of the study.

Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration

Effect of Shaft Misalignment on Time-varying Mesh Model of Spur Gear

Nonlinear Vibration Characteristics of Helical Bevel Gear Systemand Parameters Influences

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

Dynamic modeling of spur gear system considering the coupling effect between bearing deflection and gear mesh stiffness

Dynamic Analysis of a Spur Geared Rotor-Bearing System with Nonlinear Gear Mesh Stiffness

Vibration stability and bifurcation analysis of spur gear systems based on time-varying backlash and random load

A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact

Dynamic Modeling and Analysis of Spur Gears Considering Friction–vibration Interactions

Effects of supporting stiffness of deep groove ball bearings with raceway misalignment on vibration behaviors of a gear-rotor system

Dynamic Analysis of a Multi-Mesh Gear System with Mesh Stiffness Variation

Theoretical Analysis of the Natural Frequency of A Geared System under the Influence of A Variable Mesh Stiffness

Effect of the Tooth Surface Waviness on the Dynamics and Structure-Borne Noise of a Spur Gear Pair

Analytical investigation on unstable vibrations of single-mesh gear systems with velocity-modulated time-varying stiffness

Dynamic analysis of spur gears system with dynamic force increment and velocity-dependent mesh stiffness

Effects of gear eccentricity on time-varying mesh stiffness and dynamic behavior of a two-stage gear system

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Influences of gear design parameters on dynamic tooth loads and time-varying mesh stiffness of involute spur gears

Nonlinear dynamics analysis of multifactor low-speed heavy-load gear system with temperature effect considered

Research on the Influence of Backlash on Mesh Stiffness and the Nonlinear Dynamics of Spur Gears

Influence from load-dependence and varying-compliance characteristics of rolling element bearing on nonlinear dynamic behaviors of gear transmission system