Abstract:The traditional method for calculating the time-varying mesh stiffness (TVMS) of cracked gears usually assumes that the root crack is solely located within the gear tooth. Accurate calculation becomes a challenge when the crack propagates into the gear body. In this paper, an improved model for calculating the TVMS of spur gears with crack propagation into the gear body is proposed based on a combined analytical finite element-potential energy method, and the accuracy of the proposed model is verified by the finite element method. A 5-degree-of-freedom (5-DOF) dynamic model with speed fluctuation is developed, taking into account the coupling shaft-bearing stiffness as the support stiffness. Subsequently, a dynamic simulation of a gear system with a gear body crack is conducted. The results indicate that the proposed analytical model can provide relatively accurate mesh stiffness for crack propagation into the gear body. The TVMS decreases as the crack length increases, the decrease in mesh stiffness becomes more significant when considering the influence of the crack on the gear body stiffness. The dynamic response obtained from the proposed dynamic model shows more pronounced pulse characteristics compared to the model that does not consider the influence of shaft stiffness. The low speed and heavy load conditions restrain the speed fluctuation of the gear system. The residual signal is more effective for identifying fault signals than the original signal. The proposed model can provide theoretical and methodological references for diagnosing faults in gear systems with crack propagation into the gear body.

Dynamic analysis of spur gears system with dynamic force increment and velocity-dependent mesh stiffness

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

A Global Iterative Model for Mesh Stiffness and Mesh Force Estimation of Flexible Internal Meshing in Spur Planetary Gear Sets

Study on dynamic characteristics of spur gear transmission system based on different calculation models of time-varying mesh stiffness

Dynamic Analysis of a Spur Geared Rotor-Bearing System with Nonlinear Gear Mesh Stiffness

Dynamics Analysis of Spur Gears Considering Random Surface Roughness with Improved Gear Body Stiffness

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Dynamic modeling of spur gear system considering the coupling effect between bearing deflection and gear mesh stiffness

Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect

Three New Models for Evaluation of Standard Involute Spur Gear Mesh Stiffness

Dynamic Modeling and Analysis of Spur Gears Considering Friction–vibration Interactions

Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

Research on the Influence of Backlash on Mesh Stiffness and the Nonlinear Dynamics of Spur Gears

Gear dynamic modelling based on the concept of dynamic mesh stiffness: theoretical study and experimental verification

Analysis of machining errors' effects on gear pair meshing using contact finite element method

Dynamic Behavior Analysis of Spur Gears with Constant & Variable Excitations Considering Sliding Friction Influence

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

An improved dynamic model of spur gear transmission considering coupling effect between gear neighboring teeth

Analysis of Dynamic Mesh Stiffness and Dynamic Response of Helical Gear Based on Sparse Polynomial Chaos Expansion

An iterative model for mesh stiffness of spur gears considering slice coupling under elastohydrodynamic lubrication