Abstract:In light of ignoring the effect of backlash on mesh stiffness in existing gear dynamic theory, a precise profile equation was established based on the generating processing principle. An improved potential energy method was proposed to calculate the mesh stiffness. The calculation result showed that when compared with the case of ignoring backlash, the mesh stiffness with backlash had an obvious decrease in a mesh cycle and the rate of decline had a trend of decreasing first and then increasing, so a stiffness coefficient was introduced to observe the effect of backlash. The Fourier series expansion was employed to fit the mesh stiffness rather than time-varying mesh stiffness, and the stiffness coefficient was fitted with the same method. The time-varying mesh stiffness was presented in terms of the piecewise function. The single degree of freedom model was employed, and the fourth order Runge–Kutta method was utilized to investigate the effect of backlash on the nonlinear dynamic characteristics with reference to the time history chart, phase diagram, Poincare map, and Fast Fourier Transformation (FFT) spectrogram. The numerical results revealed that the gear system primarily performs a non-harmonic-single-periodic motion. The partially enlarged views indicate that the system also exhibits small-amplitude and low-frequency motion. For different cases of backlash, the low-frequency motion sometimes shows excellent periodicity and stability and sometimes shows chaos. It is of practical guiding significance to know the mechanisms of some unusual noises as well as the design and manufacture of gear backlash.

Dynamic Analysis of a Spur Geared Rotor-Bearing System with Nonlinear Gear Mesh Stiffness

Dynamic analysis of spur gears system with dynamic force increment and velocity-dependent mesh stiffness

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

Dynamics Analysis of Spur Gears Considering Random Surface Roughness with Improved Gear Body Stiffness

Nonlinear dynamic analysis of an external gear system with meshing beyond pitch point

Dynamic modeling of spur gear system considering the coupling effect between bearing deflection and gear mesh stiffness

Vibration Characteristics of Rotor System Considering Gear Meshing

Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Research on the Influence of Backlash on Mesh Stiffness and the Nonlinear Dynamics of Spur Gears

Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

Vibration analysis of a gear-rotor-bearing system with outer-ring spalling and misalignment

A flexible-helical-geared rotor dynamic model based on hybrid beam-shell elements

Three New Models for Evaluation of Standard Involute Spur Gear Mesh Stiffness

Dynamic Modeling of Gear System Based on 3D Finite Element Model and Its Application in Spalling Fault Analysis

Study on dynamic characteristics of spur gear transmission system based on different calculation models of time-varying mesh stiffness

Nonlinear dynamics of hypoid gear with coupled dynamic mesh stiffness

Dynamic analysis for a spur geared rotor system with tooth tip chipping based on an improved time-varying mesh stiffness model

Dynamic modeling and analysis of thin-webbed spur gear pair

Dynamic analysis of gear pairs considering the actual contact state of truncated asperities on the 3D rough surfaces and force-dependent mesh stiffness