Abstract:The traditional method for calculating the time-varying mesh stiffness (TVMS) of cracked gears usually assumes that the root crack is solely located within the gear tooth. Accurate calculation becomes a challenge when the crack propagates into the gear body. In this paper, an improved model for calculating the TVMS of spur gears with crack propagation into the gear body is proposed based on a combined analytical finite element-potential energy method, and the accuracy of the proposed model is verified by the finite element method. A 5-degree-of-freedom (5-DOF) dynamic model with speed fluctuation is developed, taking into account the coupling shaft-bearing stiffness as the support stiffness. Subsequently, a dynamic simulation of a gear system with a gear body crack is conducted. The results indicate that the proposed analytical model can provide relatively accurate mesh stiffness for crack propagation into the gear body. The TVMS decreases as the crack length increases, the decrease in mesh stiffness becomes more significant when considering the influence of the crack on the gear body stiffness. The dynamic response obtained from the proposed dynamic model shows more pronounced pulse characteristics compared to the model that does not consider the influence of shaft stiffness. The low speed and heavy load conditions restrain the speed fluctuation of the gear system. The residual signal is more effective for identifying fault signals than the original signal. The proposed model can provide theoretical and methodological references for diagnosing faults in gear systems with crack propagation into the gear body.

Analytical investigation on unstable vibrations of single-mesh gear systems with velocity-modulated time-varying stiffness

Parametric Instability In Planetary Gears With Frequency-Modulated Time-Varying Mesh Stiffness

Dynamic Analysis of a Multi-Mesh Gear System with Mesh Stiffness Variation

Nonlinear Vibration Characteristics of Helical Bevel Gear Systemand Parameters Influences

Investigation of Parametric Instability of the Planetary Gear under Speed Fluctuations

Effect of Shaft Misalignment on Time-varying Mesh Model of Spur Gear

Forced oscillations with time-varying mesh stiffness and backlash in gear systems

Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration

An Improved Analytical Model for Gear Mesh Stiffness Calculation

Vibration stability and bifurcation analysis of spur gear systems based on time-varying backlash and random load

Dynamic response of a single-mesh gear system with periodic mesh stiffness and backlash nonlinearity under uncertainty

Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears

Theoretical Analysis of the Natural Frequency of A Geared System under the Influence of A Variable Mesh Stiffness

Effects of gear eccentricity on time-varying mesh stiffness and dynamic behavior of a two-stage gear system

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact

Vibration stability for a locomotive driving system with time-varying mesh stiffness of gears

Time-Varying Meshing Stiffness Calculation and Vibration Analysis for A 16dof Dynamic Model with Linear Crack Growth in A Pinion

Dynamic modeling and vibration analysis of herringbone gear system with uncertain parameters

Nonlinear dynamic analysis of gear-pair systems with uncertainties

Analysis of Vibration Characteristics of Face Gear powering-split Transmission System