Abstract:In light of ignoring the effect of backlash on mesh stiffness in existing gear dynamic theory, a precise profile equation was established based on the generating processing principle. An improved potential energy method was proposed to calculate the mesh stiffness. The calculation result showed that when compared with the case of ignoring backlash, the mesh stiffness with backlash had an obvious decrease in a mesh cycle and the rate of decline had a trend of decreasing first and then increasing, so a stiffness coefficient was introduced to observe the effect of backlash. The Fourier series expansion was employed to fit the mesh stiffness rather than time-varying mesh stiffness, and the stiffness coefficient was fitted with the same method. The time-varying mesh stiffness was presented in terms of the piecewise function. The single degree of freedom model was employed, and the fourth order Runge–Kutta method was utilized to investigate the effect of backlash on the nonlinear dynamic characteristics with reference to the time history chart, phase diagram, Poincare map, and Fast Fourier Transformation (FFT) spectrogram. The numerical results revealed that the gear system primarily performs a non-harmonic-single-periodic motion. The partially enlarged views indicate that the system also exhibits small-amplitude and low-frequency motion. For different cases of backlash, the low-frequency motion sometimes shows excellent periodicity and stability and sometimes shows chaos. It is of practical guiding significance to know the mechanisms of some unusual noises as well as the design and manufacture of gear backlash.

Effect of Mesh Stiffness on the Dynamic Response of Face Gear Transmission System

Effect of Shaft Misalignment on Time-varying Mesh Model of Spur Gear

Nonlinear Vibration Characteristics of Helical Bevel Gear Systemand Parameters Influences

Research on the Influence of Backlash on Mesh Stiffness and the Nonlinear Dynamics of Spur Gears

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

Dynamic Analysis of a Multi-Mesh Gear System with Mesh Stiffness Variation

Dynamical Analysis of Planetary Gear Transmission System Under Support Stiffness Effects

Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect

Nonlinear dynamic analysis of an external gear system with meshing beyond pitch point

Forced oscillations with time-varying mesh stiffness and backlash in gear systems

Analysis of Nonlinear Vibration Characteristics of the Concentric Face-Gear Split-Torque Transmission System

Effects of gear eccentricity on time-varying mesh stiffness and dynamic behavior of a two-stage gear system

Dynamic characteristics and load-sharing performance of concentric face gear split-torque transmission systems with time-varying mesh stiffness, flexible supports and deformable shafts

Analysis of Vibration Characteristics of Face Gear powering-split Transmission System

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Dynamic analysis of spur gears system with dynamic force increment and velocity-dependent mesh stiffness

Nonlinear dynamics of hypoid gear with coupled dynamic mesh stiffness

Nonlinear Dynamic Simulation Of Coupled Lateral-Torsional Vibrations Of A Gear Transmission System

Dynamic Analysis of a Spur Geared Rotor-Bearing System with Nonlinear Gear Mesh Stiffness

Vibration characteristics analysis of face gear transmission system considering gyroscopic effect

Vibration stability and bifurcation analysis of spur gear systems based on time-varying backlash and random load