Abstract:As one of the most important dynamic excitation sources of the gear system, time-varying mesh stiffness (TVMS) is a key parameter of the gear system dynamics model. To calculate the mesh stiffness of straight bevel gears, a semi-analytical model for calculating the single mesh stiffness (SMS) was proposed based on the infinitesimal method and energy equivalence theory, considering the real transition surface of the tooth root, elastic coupling effects between tooth segments, and nonlinear contact between tooth pairs. Based on the principle of deformation compatibility and force balance and considering the extended tooth contact, which is the phenomenon of the incoming tooth pair coming in contact ahead of the theoretical start of contact and the outgoing tooth pair coming out of contact later than the theoretical end of contact, a semi-analytical calculation model of TVMS was established. Based on the analytical model, the TVMS with different torques and gear parameters was compared with that obtained from the finite element method (FEM). The causes of errors were then analyzed to verify the validity of the semi-analytical method. The results show that the mesh stiffness calculated by the semi-analytical model is in good agreement with that calculated by the FEM, and the calculation efficiency is considerably higher than that of the FEM. Finally, the influence of the gear parameters on the mesh stiffness is analyzed. This study is expected to be helpful in further enriching and developing the calculation theory of gear stiffness and providing a theoretical tool for gear dynamics research.

A Periodically Time-varying Mesh Stiffness Model for Spur Geared System Considering the Effect of Extended Tooth Contact

Effect of Shaft Misalignment on Time-varying Mesh Model of Spur Gear

A Global Iterative Model for Mesh Stiffness and Mesh Force Estimation of Flexible Internal Meshing in Spur Planetary Gear Sets

An iterative model for mesh stiffness of spur gears considering slice coupling under elastohydrodynamic lubrication

Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness

On the extended tooth contact and nonlinear dynamics for spur gears—An analytical model

Forced oscillations with time-varying mesh stiffness and backlash in gear systems

Study of the time-varying mesh stiffness of two-stage planetary gear train considering tooth surface wear

Effects of gear eccentricity on time-varying mesh stiffness and dynamic behavior of a two-stage gear system

Time-varying mesh stiffness model of a modified gear–rack drive with tooth friction and wear

Spur gear time-varying mesh stiffness considering meshing phase difference caused by angle misalignment error

An Improved Analytical Model for Gear Mesh Stiffness Calculation

Theoretical Investigation of Mesh Relationship and Mesh Stiffness of Internal Spur Gears with Tooth Wear

Nonlinear mesh stiffness model using slice coupling for straight bevel gear considering axial mesh force component and extended tooth contact

Dynamic modeling of spur gear system considering the coupling effect between bearing deflection and gear mesh stiffness

Dynamic Analysis of a Multi-Mesh Gear System with Mesh Stiffness Variation

Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect

Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration

Nonlinear dynamic response of a spur gear pair based on the modeling of periodic mesh stiffness and static transmission error

Distinctive behaviors of mesh force and transmission error in mesh stiffness model of spur planetary gear system considering elastic ring gear

A time‐varying meshing stiffness model for gears with mixed elastohydrodynamic lubrication based on load‐sharing