Abstract:The ultimate load-carrying capacity of concrete-filled steel tubular (CFST) columns exposed to monotonic loadings can be greatly increased by strengthening those columns, and the occurrence of the steel tube's outward buckling can be postponed. The current research aims to study the possibility of improving the structural characteristics of CFST columns exposed to cyclic loadings in terms of lateral load capacity and absorbed energy by strengthening them with different patterns of fiber-reinforced polymer (FRP) sheets. The ABAQUS software was used to create a three-dimensional (3D) non-linear finite element model (FEM) to simulate the behavior of FRP-strengthened CFST columns exposed to monotonic and cyclic loadings. After ascertaining the accuracy of the proposed model's results in successfully predicting failure patterns and lateral loads compared to the experimental results of tested specimens available in the literature, the model was used to create a parametric study. The parametric study focused on the impacts of the thickness, location, and length of the strengthening sheets on the failure pattern, lateral load-carrying capacity, stiffness, cumulative energy, absorbed energy, and viscous damping factor of the CFST columns exposed to cyclic loadings. The results revealed that the un-strengthened specimen displayed a maximum lateral load of 185 kN and a viscous damping factor of 45.2% at a lateral drift of 5.7%. On the other hand, strengthening the CFST column using five layers of FRP sheets exhibited the highest lateral load of all investigated columns (50% more than the un-strengthened specimen). Additionally, at a lateral drift of 5.7%, the decrease in viscous damping factor of CFST specimens due to strengthening using 1, 2, 3, 4, and 5 layers of FRP sheets with respect to the control specimen was 7.9%, 14.9%, 20.8%, 27.7%, and 30.3%, respectively.

Mechanical properties of aramid fiber reinforced polymer confined laminated bamboo lumber column under cyclic loading

FRP Spiral Strip-Confined Concrete Columns: Stress-strain Behavior and Size Effect

Axial compressive performance of laminated bamboo column with aramid fiber reinforced polymer

Experimental study on creep and loading property of laminated bamboo bridge

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Braided GFRP Sleeving Reinforced Curved Laminated Bamboo Beams: an Efficient Way to Attenuate Delamination

EXPERIMENTAL STUDY ON AXIAL COMPRESSIVE BEHAVIOR OF TIMBER COLUMN LATERALLY STRENGTHENED WITH FRP

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Comparative analysis of armid fiber reinforced polymer for strengthening reinforced concrete beam‐column joints under cyclic loadingVergleichende Analyse von armierten faserverstärkten Polymeren zur Verstärkung von Balken‐Stützen‐Verbindungen aus Stahlbeton unter zyklischer Belastung

Experimental and numerical study of PEN FRP-strengthened circular RC columns under lateral cyclic loading with high axial compression ratio

Experimental and theoretical analysis of FRP-confined square lightweight aggregate concrete columns under axial compression

Experimental Behavior of FRP-confined Circular RC Columns

Numerical Response of Concrete-Filled Steel Tubular (CFST) Columns Externally Strengthened with FRP Composites Subjected to Cyclic Loading

Experimental Study on Mechanical Properties of Bamboo Culms and Joints Reinforced with GFRP Sheets

Behaviour of CFRP strips confined partially encased concrete columns under axial compressive load

Strength and Deformation of Axially Loaded Fiber-Reinforced Polymer Sheet Confined Concrete Columns