Abstract:Abrasive waterjet peening (AWJP) has become an essential surface treatment technique to improve the surface integrity and mechanical properties of metallic parts due to its high controllability and small thermal influence. However, since existing AWJP processes are based on straight nozzles, they are difficult for complex geometrical profiles and confined spaces treatment, such as dovetail slots. In the present work, a novel deflecting AWJP (DAWJP) process with a designed deflecting nozzle was proposed and verified by experiments on the nickel-based superalloy GH4169. First, the DAWJP's deflecting nozzle was designed based on the AWJP's straight nozzle and deflecting pin with deflection angle. Second, the internal and external flow field distribution and abrasive movement state of deflecting nozzles with different deflection angles (R = 0, 1, 1.5, 2 mm) were studied by using the FLUENT CFD software. Finally, the surface integrity of the GH4169 specimen treated by the proposed DAWJP with an optimized deflecting nozzle was investigated, including microstructure, height difference, surface roughness and microscopic morphology, surface and subsurface microhardness and compressive residual stress (CRS). The results of this study highlighted that the deflecting nozzle with a deflection angle of 1.5 mm could obtain relatively optimized jet flow velocities of the water and abrasive mixed phases. The GH4169 specimen treated by the DAWJP with different processing parameters using the optimized deflection angle formed a plastic deformation depth of 22–51 μm, a height difference between the as-received and DAWJP treated surface of 4–48 μm, and the surface roughness Ra and Sa of 0.199–0.503 μm and 0.535–0.953 μm. The surface microhardness and CRS of the DAWJP treated specimen were approximately 522–573 HV and 773–991 MPa, which is 7.6 %–18.1 % and 209 %–296 % times higher than the as-received specimen, respectively. The work-hardened layer and CRS depth of the near surface of the specimen induced by the DAWJP treatment were approximately 120–180 μm and 112–203 μm. This work presents a novel DAWJP method and investigates its effect on the surface integrity of the GH4169 material, which is expected to have applications in improving the surface integrity and mechanical properties of metallic parts with confined spaces.

Study of Manufacturing Process of Holes in Aeroengine Heat Shield

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

Study on reducing burrs of super alloy through structures in water jet guided laser ablation

Experimental study of nickel-based superalloy IN792 with femtosecond laser drilling method

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Processing and microstructure analysis on the precision rotary swaging of inner-stepped aero-engine shaft

Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes

High surface integrity machining of typical aviation difficult-to-machine material blade

Process qualification, additive manufacturing, and postprocessing of a hydrogen peroxide/kerosene 6 kN aerospike breadboard engine

Process parameter optimization of K477 and GH4169 for defect control in laser-directed energy deposition using Taguchi design of experiments

Shaped metal deposition of a nickel alloy for aero engine applications

Study on the Surface Quality of Overhanging Holes Fabricated by Additive/Subtractive Hybrid Manufacturing for Ti6Al4V Alloy

Impact of Process Parameters on the Quality of Deep Holes Drilled in Inconel 718 Using EDD

Improving the fatigue property of diffusive film cooling holes in nickel-based single crystal superalloy via ultrashort pulse laser drilling coupled with abrasive flow machining

Numerical and experimental study on double coaxial gas assisted water jet guided laser machining of superalloy

Surface strengthening in confined spaces: A novel deflecting abrasive waterjet peening for improving the surface integrity of nickel-based superalloys GH4169

Overcoming challenges: advancements in cutting techniques for high strength-toughness alloys in aero-engines

Numerical Control Machining Process Parameters of Nickel-based Alloy Casing

Percussion Drilling of Deep Holes Using Picosecond Ultrashort Pulse Laser in Ni-Based Superalloy Coated with Ceramic Thermal Barrier Coatings

Hole quality and tool wear when dry drilling of a new developed metal/composite co-cured material

Trepanning of Supper-Alloy with Thermal Barrier Coating Using Femtosecond Laser