Abstract:Waterjet-assisted laser drilling technology facilitates the fabrication of high-quality micro-holes by utilizing the collaborative benefits of waterjets and lasers. In this study, the coaxial waterjet-assisted laser drilling (CWALD) technique was employed to improve the properties of micro-holes during femtosecond laser drilling. Based on computational fluid dynamics (CFD) simulations, the stability of the waterjet was initially verified by optimizing the structure of the watercourse and nozzle shape in the CWALD device. Furthermore, a comparative experiment between laser direct drilling (LDD) and CWALD revealed that while CWALD can produce well-rounded micro-holes with a high aspect ratio, it exhibits lower efficiency and results in a larger heat-affected zone (HAZ). To address these drawbacks associated with CWALD, a two-step coaxial waterjet-assisted composite laser drilling (TS-CWALD) method was proposed. TS-CWALD involves applying CWALD for secondary modification of micro-hole shape following LDD with punching. This modification process is pivotal for enhancing drilling accuracy but requires consideration of multiple parameters. For this purpose, regression models were established for the inlet diameter, outlet diameter, and taper; response surface methodology was then employed to optimize these parameters. Subsequently, interactive effects analysis was conducted on different responses based on laser pulse energy, frequency, modification speed, and number of modification cycles. The adequacy of the developed models was subsequently verified using analysis of variance methods. Finally, the successful fabrication of a film hole with an inlet diameter of 205 μm and an outlet diameter of 200 μm, featuring a taper of only 0.2°, was achieved ultimately through meticulous parameter optimization. Furthermore, the micro-hole retained a minimal HAZ. The optimized parameters encompassed a pulse energy of 20.6 μJ, frequency of 127 kHz, modification speed of 3 mm/s, and shape modification carried out over 335 cycles.

Study on reducing burrs of super alloy through structures in water jet guided laser ablation

Numerical and experimental study on double coaxial gas assisted water jet guided laser machining of superalloy

Investigation on Geometric Precision and Surface Quality of Microholes Machined by Ultrafast Laser

Optimizing Hole Shape and Improving Surface Quality of Inconel 718 Alloy by High-Temperature Chemical Assisted Laser Processing

Investigations on the Water-Jet Guided Laser Drilling Film Cooling Holes on the 8.5 Mm-Thick TBC Superalloy

Experimental Characterization of Laser Trepanned Microholes in Superalloy GH4220 with Water-Based Assistance

Mass Fabrication of Microholes in Aviation Kerosene Filters Using the Back-water-assisted Picosecond Laser Drilling Technique

Investigations on the Water-Jet Guided Laser Scribing of Thermal Barrier Coated IC21 Nickel-Based Superalloy

A comprehensive study on water jet guided laser micro hole drilling of an aerospace alloy

Improving Superficial Microstructure and Properties of the Laser-Processed Ultrathin Kerf in Ti-6Al-4V Alloy by Water-Jet Guiding

Experimental Research and Optimization of Ti-6Al-4V Alloy Microgroove Machining Based on Waterjet-Guided High-Power Laser

Experimental investigation and optimization of modification during coaxial waterjet-assisted femtosecond laser drilling

Dual-directional Ultrasonic Vibration-Assisted Femtosecond Laser Drilling of Film Cooling Holes

Trepanning of Supper-Alloy with Thermal Barrier Coating Using Femtosecond Laser

A Superhydrophobic Surface on a Superalloy Substrate with Properties of High Mechanical Strength and Self-Cleaning of Carbon Deposition

Process Applicability and Hole Wall Microstructure Evolution Mechanism of Femtosecond Laser Spiral Drilling

Abrasive water jet polishing of TBC blocked inclination holes on superalloys using an optimized nozzle

Water jet guided laser microdrilling of aerospace alloys: Correlation of material properties to process time and quality

Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy

Study of Manufacturing Process of Holes in Aeroengine Heat Shield

Experimental Study on Coaxial Waterjet-Assisted Laser Scanning Machining of Nickel-Based Special Alloy