Abstract:With the popularity of new energy vehicles and various electronic devices, the use of lithium-ion batteries (LIBs) has shown explosive growth, which has resulted in a large number of spent LIBs. Spent LIBs contain a large amount of metal resources, and improper disposal will not only cause waste of resources, but also have potential environmental risks. The existing commercial recycling methods are mainly pyrometallurgy and hydrometallurgy recycling methods, both of which require re-extraction from the electrode material after destroying them to the atomic level for the preparation of new electrode materials, which is a long process with high cost, and involves the application of extreme conditions such as high temperature and strong acid, with inferior economic and environmental benefits. It is a major challenge in the field of battery recycling to develop innovative and clean recycling methods, to simplify the recycling process and to develop ways to reuse the recovered products. In view of the challenge of existing recycling methods, the reporters proposed the idea of direct recycling of electrode materials at the molecular scale, and designed innovative recycling methods such as direct repair of degraded lithium cobalt oxides with deep eutectic solvent (DES), repair of Ni-Mn-Co ternary (NCM) cathode with high failure degree by low temperature molten salt, and thermal regeneration of degraded lithium iron phosphate (LFP) with multifunctional solvent; and closed-loop design of the direct recycling process. In addition, we propose a high-value utilization path for the conversion of degraded electrode materials to high-performance electrode materials and nano-catalysts. It greatly simplifies the recycling process, avoids the use of extreme conditions, and provides a new technical system and theoretical guidance for battery recycling research and industry.

Lithium Nickel Cobalt Manganese Oxide Recovery via Spray Pyrolysis Directly from the Leachate of Spent Cathode Scraps

Urea Solvothermal Regeneration of Spent LiNi0.5Co0.2Mn0.3O2: Performance and Environmental Benefits

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

A mild and efficient closed-loop recycling strategy for spent lithium-ion battery

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Exploration of physical recovery techniques and economic viability for retired lithium nickel cobalt manganese oxide-type lithium-ion power batteries

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

Rejuvenating LiNi0.5Co0.2Mn0.3O2 cathode directly from battery scraps

Recent progress on sustainable recycling of spent lithium-ion battery: Efficient and closed-loop regeneration strategies for high-capacity layered NCM cathode materials

A green, efficient, closed-loop direct regeneration technology for reconstructing of the LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Process for recycling mixed-cathode materials from spent lithium-ion batteries and kinetics of leaching

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Stepwise recovery of critical metals from spent NCM lithium-ion battery via calcium hydroxide assisted pyrolysis and leaching

Repair and Reuse of Spent Lithium Battery Electrode Materials

Efficient Recovery of Value Metals from Spent Lithium-Ion Batteries by Combining Deep Eutectic Solvents and Coextraction

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Recycling and Direct-Regeneration of Cathode Materials from Spent Ternary Lithium-Ion Batteries by Hydrometallurgy: Status Quo and Recent Developments : Economic recovery methods for lithium nickel cobalt manganese oxide cathode materials