Abstract:In various industrial processes, solid-liquid multiphase flows involving continuous carrier and discrete particle phases have erosion challenges. In this work, a modified drag model that considers the influence of turbulence intensity and a modified erosion model that considers the effect of low-angle impact are developed. An improved method combined modified drag model and modified erosion model based on LES is proposed for numerical simulation of solid-liquid multiphase flow and erosion. The commercial software ICEM for grid generation and ANSYS FLUENT for LES are used in the present work. In validation test of velocity distribution of solid-liquid multiphase flow in a vertical pipe, the mean relative error of the liquid phase pulsation velocity is 10.01 % for modified drag model, whereas the mean relative error is 16.11 % for original drag model. In validation test of the maximum erosion depth from a submerged impact test at a tilt angle of 45 degrees, the relative error is 0.23 % for modified erosion model, while the relative error is 13.39 % for original erosion model. Then, the improved method is employed to compute the characteristics of solid-liquid flow and erosion in a 90 degrees elbow. Particles have a significant influence on liquid flow in the shear layer area where the inner arch separation zone interacts with the main flow, and this influence is most pronounced at the position of r* = 0.3 at yd = 0.4D. At this position, particles result in 15.27 % reduction in liquid velocity and 8.75 % increase in turbulence intensity. The mean relative error of the elbow erosion rate by using the improved method is 16.95 %, whereas it is 31.34 % of the reference work. The erosion is affected by impact velocity, angle, and particle number, and the most significant parameter is the particle number in the severe erosion area.

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Reprint of “erosion Prediction of Liquid-Particle Two-Phase Flow in Pipeline Elbows Via CFD–DEM Coupling Method”

Investigation on Erosion of Continuous Bending Pipes in Different Directions

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

Pipe bend erosion CFD modeling for two-phase liquid–solid slurry

Three-dimensional numerical investigation of solid particle erosion in gate valves

Computational Erosion Wear Model Validation of Particulate Flow Through Mitre Pipe Bend

Numerical simulation of the erosion in the 90° elbow

Numerical investigation of the erosion behavior in elbows of petroleum pipelines

An Improved Method Combined Modified Drag Model and Modified Erosion Model Based on LES for Solid-Liquid Multiphase Flow and Erosion with Application in a 90° Elbow

Numerical prediction of solid particle erosion in angle-cutting elbows with gas-solid flow

Investigation on the Erosion Characteristics of Liquid–Solid Two-Phase Flow in Tee Pipes Based on CFD-DEM

Viscoelastic flow in rotating curved pipes

Numerical Simulation of Erosion Wear for Continuous Elbows in Different Directions

Numerical Simulation of the Erosion Characteristics and Structure Optimization of Elbows Connection for Gas-solid Flow

Predicting Erosion-Corrosion Induced by the Interactions Between Multiphase Flow and Structure in Piping System

CFD Simulation and Erosion Prediction for the Flow Influence of Inserted Component of Pipes

Sand erosion prediction model for two-phase flow pipe bends and its application in gas-liquid-solid multiphase flow erosion

Failure analysis and prediction of pipes due to the interaction between multiphase flow and structure