Abstract:Sand erosion has been identified as a potential damage and failure mechanism in pipelines/elbows employed to transport gas from wells to terminals. Erosion can cause localized material loss decreasing the structural integrity of pipelines/elbows leading to failure. As a result, sand erosion has been the object of much research work in the oil and gas industry. The prediction of erosion caused by sand transported by hydrocarbons flow is a difficult task due to the large number of variables involved. At present, a great number of empirical models have been developed to predict sand erosion in smaller diameter pipelines under laboratory conditions. Therefore, such formulations generally present uncertainties for their application in larger diameter pipelines employed to transport oil and gas because there is no fundamental basis showing how the empirical formulations can be extrapolated to large diameters pipelines as most of the models have been developed on the basis of elementary laboratory experiments, which may not represent the real sand erosion conditions. Furthermore, most of the analytical/empirical models were developed for specific pipeline/elbows diameters and cannot be employed to predict erosion in different engineering structures. Hence, in the present work a computational fluid dynamic modeling strategy is proposed, which incorporated fundamental physically erosion parameters to predict erosion in larger diameter pipelines/elbows. The methodology was applied to different elbows/pipelines diameters in order to investigate how pipeline's diameter, sand production rate, and sand particles sizes affect the erosion mechanism and the erosion rate. The results showed the importance of including fluid and flow conditions, sand particles trajectory, and self-particles movement. The computational fluid dynaimcs results were compared with those obtained with the most employed empirical models to predict sand erosion in the oil and gas industry models published in the literature, and it was shown that the proposed modeling strategy can be used to predict erosion in larger diameters pipelines/elbows with good results.

Sand erosion prediction model for two-phase flow pipe bends and its application in gas-liquid-solid multiphase flow erosion

Prediction of sand particle trajectories and erosion distribution in offshore oil and gas pipelines

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Numerical Simulation of Elbow Erosion in Shale Gas Fields under Gas-Solid Two-Phase Flow

Predicting erosion in wet gas pipelines/elbows by mathematical formulations and computational fluid dynamics modeling

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Numerical simulation of erosion wear and leakage flow field of gas-solid two-phase flow in a T-shaped pipeline

Simulation of Elbow Erosion of Gas–Liquid–Solid Three-Phase Shale Gas Gathering Pipeline Based on CFD-DEM

Simulation of Abrasion Characteristics of Polar Ship Seawater Pipelines under the Coupling of Ice Particles and Vibration

Pipe bend erosion CFD modeling for two-phase liquid–solid slurry

The erosion rate prediction for the elbow in shale gas gathering and transportation system: RSM and GA-BP-ANN modeling

A Numerical Study of Sand Particle Erosion in Elbow and a Series of Plugged Tees in Gas-Particle Two-Phase Flow

Numerical simulation of sand erosion in Venturi tube under different flow characteristics and sand content

Erosion Analysis and Optimal Design of Sand Resistant Pipe Fittings

CFD Simulation and Erosion Prediction for the Flow Influence of Inserted Component of Pipes

Experimental and numerical simulation study on the erosion behavior of the elbow of gathering pipeline in shale gas field

Three-dimensional numerical investigation of solid particle erosion in gate valves

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

Numerical Prediction of Solid Particle Erosion in Jet Pumps Based on a Calibrated Model

Modelling of annular flow and sand erosion in bends using a thin liquid film method

Prediction of erosion defects and buckling pressure of pipe bend based on bidirectional fluid-structure interaction method