Abstract:Sand erosion has been identified as a potential damage and failure mechanism in pipelines/elbows employed to transport gas from wells to terminals. Erosion can cause localized material loss decreasing the structural integrity of pipelines/elbows leading to failure. As a result, sand erosion has been the object of much research work in the oil and gas industry. The prediction of erosion caused by sand transported by hydrocarbons flow is a difficult task due to the large number of variables involved. At present, a great number of empirical models have been developed to predict sand erosion in smaller diameter pipelines under laboratory conditions. Therefore, such formulations generally present uncertainties for their application in larger diameter pipelines employed to transport oil and gas because there is no fundamental basis showing how the empirical formulations can be extrapolated to large diameters pipelines as most of the models have been developed on the basis of elementary laboratory experiments, which may not represent the real sand erosion conditions. Furthermore, most of the analytical/empirical models were developed for specific pipeline/elbows diameters and cannot be employed to predict erosion in different engineering structures. Hence, in the present work a computational fluid dynamic modeling strategy is proposed, which incorporated fundamental physically erosion parameters to predict erosion in larger diameter pipelines/elbows. The methodology was applied to different elbows/pipelines diameters in order to investigate how pipeline's diameter, sand production rate, and sand particles sizes affect the erosion mechanism and the erosion rate. The results showed the importance of including fluid and flow conditions, sand particles trajectory, and self-particles movement. The computational fluid dynaimcs results were compared with those obtained with the most employed empirical models to predict sand erosion in the oil and gas industry models published in the literature, and it was shown that the proposed modeling strategy can be used to predict erosion in larger diameters pipelines/elbows with good results.

Modelling of annular flow and sand erosion in bends using a thin liquid film method

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

A Numerical Procedure for Estimating the Sand Erosion of Elbows in Annular Flow with the Complete Thickness Distribution of the Liquid Film

Experimental and Numerical Study on the Impact of Sand-Carrying Liquid Erosion on Coiled Tubing Wall

Prediction of sand particle trajectories and erosion distribution in offshore oil and gas pipelines

Sand erosion prediction model for two-phase flow pipe bends and its application in gas-liquid-solid multiphase flow erosion

Numerical Simulation on the Erosion Characteristics of Dense Particles in the Annular Channel of Downhole Fracture Pipe

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

A Numerical Study of Sand Particle Erosion in Elbow and a Series of Plugged Tees in Gas-Particle Two-Phase Flow

Predicting Erosion in a Non-Newtonian Shear-Thinning Jet Flow with Validated CFD Models from PIV and PTV Measurements

Experimental and Numerical Simulation Analyses of Elbow Erosion in Surface Process of Deepwater Gas Well Testing

Predicting erosion in wet gas pipelines/elbows by mathematical formulations and computational fluid dynamics modeling

Development and experimental validation of a computational fluid dynamics-discrete element method sand production model

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Eulerian-Lagrangian investigation of erosion wear within a water-submerged Jet: Two-way coupling

Analysis and Simulation of Erosion of Sand Control Screens in Deep Water Gas Well and Its Practical Application

An Improved Method Combined Modified Drag Model and Modified Erosion Model Based on LES for Solid-Liquid Multiphase Flow and Erosion with Application in a 90° Elbow

Numerical Investigation of Sediment-Laden Flow in A High-Head Francis Turbine Runner