Abstract:Helically coiled tube (HCT) is widely used in nuclear engineering and other fields due to its effective compactness, excellent structure robustness, heat transfer efficiency and flow stability. As one of the most important gasliquid twophase flow patterns in HCT, the characteristic of annular flow has a great influence on the heat transfer performance of helical oncethrough steam generator. Especially, the circumferential distribution of liquid film thickness in annular flow directly determines the dryout onset location. Although the liquid film flow in straight tubes has been extensively studied, due to the limitation of measurement technology, the precise measurement data of liquid film thickness in HCT are still very rare. In this paper, based on the selfdeveloped noninvasive contact ringisland array sensor (RIAS), airwater twophase flow experiments were carried out to study the threedimensional spatialtemporal distribution of liquid film thickness in vertical HCT with different structures. According to the results, four typical liquid film flow regimes were defined based on the circumferential position of the thicker liquid film appearing in the tube wall. That is, the bottom distribution (BD) dominated by gravity force, the outside distribution (OD) dominated by liquid centrifugal force, the inside distribution (ID) dominated by gas centrifugal force and the insideoutside distribution (IOD) dominated by secondary flow. The effects of coil diameter and coil pitch of HCT as well as gas and liquid velocities on the distribution of liquid film flow regimes were detailed analyzed. It is implied that the coil diameter determines the intensity of centrifugal force and secondary flow. Generally, the smaller the coil diameter, the easier the circumferential distribution forms of OD, ID and IOD are to appear. Also, increasing the coil pitch weakens the effect of centrifugal force on the liquid film. Then a small coil pitch normally results in the circumferential distribution form of OD while it is ID for large coil pitch. It is also found that the IOD occurs only when both gas and liquid velocities are large enough. By taking the influence of HCT geometry and fluid parameters into account, a general submap of liquid film flow in HCT was proposed using the modified Dean number De* and the modified LockhartMartinelli parameter X*. The transition criteria between different liquid film flow regimes were also established and verified with experimental data in present work and previous references. From this work, the mechanism of curvatureinduced centrifugal force and secondary flow on the spatiotemporal evolution of liquid film in HCT is revealed.

Thin liquid film method for analyzing gas–liquid annular flow in nonstraight pipe components

Numerical Simulation of Gas-Liquid Flow Through a 90° Duct Bend with a Gradual Contraction Pipe

Liquid film parameter measurement based on thermal distribution sensor in horizontal annular flow

Mhd Effect on Flow Structures and Heat Transfer Characteristics of Liquid Metal-Gas Annular Flow in A Vertical Pipe

Investigation of the Gas–Liquid Two-Phase Flow and Separation Behaviors at Inclined T-Junction Pipelines

Measurement of Liquid Flow Rate among the Annular Flow in Vertical Tee Junction

Study on Measurement of Gas-Liquid Two-Phase Flow Using Annular Pipe Flowmeters

MODEL FOR PREDICTION OF CIRCUMFERENTIAL DISTRIBUTION OF FILM THICKNESS IN HORIZONTAL GAS-LIQUID ANNULAR FLOW

Experimental investigations of gas–liquid two-phase flow in a horizontal mini pipe: Flow regime, void friction, and frictional pressure drops

Numerical Simulation and Flow Pattern Evolution of Gas-Liquid Two-Phase Flow Passing Through a 90° Pipe Bend Based on CFD

Liquid film characteristics measurement based on NIR in gas–liquid vertical annular upward flow

Experimental and modeling study on liquid film thickness of horizontal gas-liquid annular flow using ultrasonic method

Experimental Study on Characteristics of Liquid Film of Annular Flow in Helically Coiled Tube Using Ring-island Array Sensor

Experimental study of two-phase flow structure in churn-turbulent to annular flows

Flow regime evolution mechanism and falling flux prediction model for bypass injection of viscous liquid in vertical T-junction

Liquid–solid separation phenomena of two-phase turbulent flow in curved pipes

Modelling of annular flow and sand erosion in bends using a thin liquid film method

Experimental Research on the Transformation of Gas-Oil Two-Phase Flow Pattern in Large Vertical Annulus

A novel laser interferometric method for thin film thickness measurement in gas-liquid intermittent flow

An optimize empirical correlations for liquid film thickness and interfacial friction factor in vertical gas-liquid annular flow

Comparative Analysis of Gas–liquid Flow in T-junction Microchannels with Different Inlet Orientations