Abstract:BACKGROUND The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3-SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. RESULTS A series of Mn-Ce-Co-x/Ti-C,N catalysts were prepared by the impregnation method, and low-temperature NH3-SCR was studied. The results show that support modification (Ti-C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn-Ce/TiO2 catalyst, 160-320 degrees C; Mn-Ce/Ti-C,N catalyst, 140-320 degrees C). The doping of Co further improves the low-temperature NH3-SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 degrees C. CONCLUSION Temperature-programmed reduction (H-2-TPR) and temperature-programmed desorption (NH3-TPD) results showed that Ti-C,N can improve the redox ability but reduces the surface acidity. Co-doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co-doping is beneficial to the optimal catalytic activity of Mn-Ce-Co-0.05/Ti-C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low-temperature NH3-SCR through the 'fast SCR' pathway. X-ray photoelectron spectroscopy results of the highest chemisorbed oxygen (O-alpha) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir-Hinshelwood (L-H) and Eley-Rideal (E-R) mechanisms occurred in the NH3-SCR reaction over the Mn-Ce-Co-0.05/Ti-C,N catalyst. (c) 2021 Society of Chemical Industry

Constructing hollow silkworm structure in MnOx–TiO2 catalysts for improving the performance in selective catalytic reduction of NO by NH3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Titania-Samarium-Manganese Composite Oxide for the Low-Temperature Selective Catalytic Reduction of NO with NH3

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

A High-Performance Mn/TiO2 Catalyst with a High Solid Content for Selective Catalytic Reduction of NO at Low-Temperatures

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Sm-MnO /TiO2-{001} with preferentially exposed anatase {001} facet for selective catalytic reduction of NO with NH3

Flexible Ti Mesh-Supported MnO x –CuO x /TiO 2 Nanosheet Monolithic Catalysts for Low-Temperature Selective Catalytic Reduction of NO x with NH 3

The fabrication of Mn single atoms/clusters on Al2O3 for enhanced catalytic NO oxidation

Catalytic oxidation of NO over SmMn2O5 nanostructures derived from different Mn precursors

Advanced Mnox/Tio2 Catalyst with Preferentially Exposed Anatase {001} Facet for Low-Temperature Scr of No

Insight into the enhanced catalytic activity and H2O/SO2 resistance of MnFeOx/Defect-Engineered TiO2 for low-temperature selective catalytic reduction of NO with NH3

MnOx Fabrication with Rational Design of Morphology for Enhanced Activity in NO Oxidation and SO2 Resistance

A novel MnCoOx@TiO2 double–wall nanocages derived from Prussian blue analogue for NH3-SCR of NOx

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Highly Dispersed MnOx–FeOx Supported by Silicalite-1 for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

Promoting Effect of Ti Species in MnOx-FeOx/Silicalite-1 for the Low-Temperature NH3-SCR Reaction

In situ synthesis of low-valence MnO/Mn 3 O 4 catalyst via carbon-acid hydrothermal strategy for NO removal

Catalytic Reduction of NO with NH 3 over V 2 O 5 -MnO X /TiO 2 -Carbon Nanotube Composites