Abstract:A continuous-rate digital clock and data recovery (CDR) with automatic frequency acquisition is presented. The proposed automatic frequency acquisition scheme implemented using a conventional bangbang phase detector (BBPD) requires minimum additional hardware, is immune to input data transition density, and is applicable to subrate CDRs. A ring-oscillator-based two-stage fractional-N phase-locked loop (PLL) is used as a digitally controlled oscillator (DCO) to achieve wide frequency range, low noise, and to decouple the tradeoff between jitter transfer (JTRAN) bandwidth and ring oscillator noise suppression in conventional CDRs. The CDR is implemented using a digital D/PLL architecture to decouple JTRAN bandwidth from jitter tolerance (JTOL) corner frequency, eliminate jitter peaking, and remove JTRAN dependence on BBPD gain. Fabricated in a 65 nm CMOS process, the prototype CDR achieves error-free operation (BER ${\rm{<10^{-12}}}$) from 4 to 10.5Gb/s with pseudorandom binary sequence (PRBS) data sequences ranging from PRBS7 to PRBS31. The proposed automatic frequency acquisition scheme always locks the CDR loop within 1000 ppm residual frequency error in worst case. At 10Gb/s, the CDR consumes 22.5${\rm{\,mW}}$ power and achieves a recovered clock long-term jitter of 2.2 ${\rm ps_{rms}}$/24.0 ${\rm{ ps_{pp}}}$ with PRBS31 input data. The measured JTRAN bandwidth and JTOL corner frequencies are 0.2 and 9MHz, respectively.

An electronic clock for a coded time channel on a magnetic tape recorder

Design of Adiabatic Timer Based on Three Essential Circuit Elements for Adiabatic Circuits

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A Time-Encoding Machine Based High-Speed Analog-to-Digital Converter

A design of digital electronic clock

High-Precision Timing System Based on Microcontroller

A Multi-Gigahertz Analog Transient Recorder Integrated Circuit

Designing a Binary Clock using logic gates

A fast and compact timing discriminator

Intelligent electronic perpetual calendar

Design and implementation of Digital Electronic Clock System based on AT89S52

Digital Square-Wave Frequency Modulated Microwave Sources For A Miniature Optically Pumped Cesium Beam Clock

A Low-power Synthesizable Time-to-Digital Converter Using Amplification to Overcome Mismatch

A High Resolution Time-to-Digital Converter (TDC) Based on Self-Calibrated Digital-to-Time Converter (DTC).

Chip-Scale Molecular Clock

A 4-to-10.5 Gb/s Continuous-Rate Digital Clock and Data Recovery With Automatic Frequency Acquisition

Carry chain based multi-channel time-to-digital converter

Optical Detection in Magnetic State-Selection Cs Beam Tubes for Transportable Cs Beam Clocks

A Programmable Dco-Based Digital Clock Multiplier and Divider

A DNA circuit that records molecular events

A stopwatch-based photogate timer