Design and implementation of Digital Electronic Clock System based on AT89S52

Liu De-cang

Abstract:It was desgined a Digital Electronic Clock System using AT89S52 MCU made by the ATMEL corporation and RTC DS12887 made by the DALLAS corporation,which presented the diagram of applied circuit principle and software design and implemented the date,time display and reported time.

Computer Science,Engineering

What problem does this paper attempt to address?

A design of digital electronic clock

Zhao Shu-fan

Abstract:The system is made up by silicon crystal oscillator,frequency divider,number counter,decipherer,LED indicator and calibrated circuit and utilizes the medium-sized and small-sized integruted chip of CMOS series(double-row plug-in).The design for the overall project is composed of two parts the main circuit and the expanded circuit.The main circuit carries on the basic function of the digital electronic clock and the expanded circuit carries on the expanded function of it.Each unit is designed and the overall adjustment is performed.

Computer Science,Engineering
Design of All-digital Clock Recovery Unit Based on USB Device

ZHANG Jun,SHEN Hai-bin

DOI: https://doi.org/10.3969/j.issn.1000-3428.2012.14.069

2012-01-01

Abstract:This paper designs a kind of all-digital clock recovery unit based on USB full speed device to solve the problem that common clock recovery methods in USB full speed device are low accuracy or high cost.This clock recovery unit contains a module which can extract timing messages from USB bus data,and uses the digitally-controlled oscillator which can overcome the bad effect by the chip's different operating conditions.The design uses the all-digital circuit design processes,logic synthesis and P&R process of which is based on the standard cell library.The result of this design satisfies the USB specification's requirements.
The design and simulation of a digital electronic clock system based on Proteus and Keil

Yuan Qiu-feng

Abstract:Proteus and Keil are the main tools for developing single chip microcomputer systems.They have such characteristics as saving cost,reducing development cycle and increasing success rate of design.In this paper,a digital electronic clock system is designed and simulated,with AT89C51,DS1302 and LCD 1602 as the main components.

Computer Science,Engineering
Design of Multifunction Digital Clock Based on FPGA

纪欣然,丁一,梁致源

DOI: https://doi.org/10.3969/j.issn.1674-6236.2012.16.056

2012-01-01

Abstract:This paper briefly introduces a design scheme of multifunction digital clock based on FPGA. On the basis of achieving basic functions such as timing, adjusting and chronopher, the scheme brings in new world-time function, which can convert Beijing Time to GMT quickly. The design input method of the scheme combines VHDL and block diagram. The digital clock is designed, compiled as well as simulated under Quartus II development environment, and tested on the FPGA hardware development board. The experiment verifies the design scheme, which offers references for the application of FPGA and the design of digital clock.
Design and implementation of a digital clock showing digits in Bangla font using microcontroller AT89C4051

Nasif Muslim,Md. Tanvir Adnan,Mohammad Zahidul Kabir,Md. Humayun Kabir,Sheikh Mominul Islam

DOI: https://doi.org/10.48550/arXiv.1208.0995

2012-08-05

Hardware Architecture

Abstract:In this paper, a digital clock is designed where the microcontroller is used for timing controller and the font of the Bangla digits are designed, and programmed within the microcontroller. The design is cost effective, simple and easy for maintenance.
Digital Perpetual Calendar Design Based on Single Chip Microcomputer

Jijin Zhu

Abstract:The twenty-first century is an era of highly advanced electronic development. People's pursuit of tools has also become simple, convenient, and efficient [1]. However, the concept of time is getting deeper and deeper. People have become more and more focused on time, which has prompted the development of clocks. This design and production is based on STC89C52 as the core, DHT11, DS1302 realize temperature and humidity, time data acquisition system, and with the key circuit, power circuit, reset circuit, amplifier circuit composed of multi-function calendar system, the final completion of the day and month through the LCD display , Year, Hours, Minutes, Seconds, Temperature and Humidity, etc. This design decided to adopt the one-chip computer STC89C52 as the main control system, adopt LCD12864 liquid crystal display screen as the display module and offer the final data to user, the clock module adopts DS1302 clock chip to connect AT89C52 to finish the computational function of the time, the temperature and humidity collection adopts the sensor DHT11 chip , using 3 ~ 5V DC power supply for the microcontroller and other chips to complete, so as to achieve multi-function calendar function.

Computer Science,Engineering
High-Precision Timing System Based on Microcontroller

Rui Cao

DOI: https://doi.org/10.4028/www.scientific.net/amr.546-547.131

2012-07-01

Advanced Materials Research

Abstract:The task of timing system is countdown on a set date and showing the time from current date to the setting date to enhance people’s attention and sense of urgency. A kind of high-precision timing system is introduced. The system is controlled by single-chip microcontroller. High integration clock chip is used as clock module. System hardware design and software design are introduced. System hardware design includes design of clock module, its connection with single-chip microcomputer, and the design of display module. System software design includes the settings of single-chip serial port, its initialization, the reading and writing of the clock module, the countdown program and the display program. Compared with other timing system which consists of frequency demultiplication by multivibrator, this system is more stable and reliable. The accumulative error is zero when long-time running continuously. Because the system control module is simple, it is convenient to be developed and utilized. Practice shows that this high-precision timing system can meet practical needs well.
Design of Microcontroller-based Multi-function Electronic Scales

Yu Tao

DOI: https://doi.org/10.14018/j.cnki.cn13-1085/n.2012.03.051

2012-01-01

Abstract:The design takes the 51 series Microcontroller AT89S52 as the control core to achieve the basic control functions of electronic scales.In order to make better use of resources of AT89S52,the system extends the electronic calendar clock module,temperature measurement and voice report functions.The entire system is simple,easy to use and full-featured,and has high precision,so it has a certain value for development.
The Design and Application of an Altimeter System Based on 89C52

YUAN Jie,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.10.009

2005-01-01

Abstract:This paper accounts for the design problem of an altimeter system based on 89C52,which is an 8 bit microcontroller produced by ATMEL. Specially,it depends on the relationship between pressure,temperature and altitude.The most important points in this paper is that it uses the I/O in 89C52 to achieve the function of SPI,which makes the A/D function come true with TLC2543.Thereafter it transfers the data which is processed to the LCD,also it returns the data to the control computer through RS232.
Design and Make of the Degital Power Instrument

Jun Zhu

2006-01-01

Abstract:The design applies a timer branch analog multiplier as the kernel and applies CMOS dual slope A/D converter ICL7107 to driver the single from analog to digital and driver the LED for display.In this disquisition we will introduce the design and make and experiment of the 3 and half digital power instrument.
Design of electronic clock and stopwatch based on FPGA and VHDL language

Hanchen Kang

DOI: https://doi.org/10.1088/1742-6596/2649/1/012035

2023-12-07

Journal of Physics Conference Series

Abstract:This paper designs a simple system that can include electronic clock and stopwatch based on FPGA(Field Programmable Gate Array) and VHDL(Very-High-Speed Integrated Circuit Hardware Description Language). The first chapter briefly introduces the research background. The second chapter introduces the theoretical basis of digital circuits and the hardware and software platform used in this paper. In the third chapter, the design of each sub-module of the system and the overall design of the system are carried out. This chapter is the core chapter of this article, which describes the functions of the module and explains the input and output ports. In this chapter, a core point of digital circuit design is reflected: combining modules that realize simple functions into modules that can realize complex functions. And integrate sub-modules that realize similar functions into a top-level module. The fourth chapter is the logic synthesis of the circuit. The fourth chapter shows the simulation of the core module function and the simulation of the system output. The conclusion section summarizes the interesting parts of the design of this paper.
Design and Implementation of STM32-Based Clock Driver for Frame Transfer Scientific CCD

Shu-cheng DONG,Hong-fei ZHANG,Sheng-zhao LIN,Jian-min WANG,Xin LIU,Jian WANG

DOI: https://doi.org/10.3969/j.issn.0258-0934.2014.08.022

2014-01-01

Abstract:In order to meet the requirements of the Antarctic expedition and Antarctic astronomical observation , a clock drive circuit is designed which is based on a STM 32 to control a scientific grade CCD chip in frame transfer mode .In this paper , the time sequence of CCD -57 is introduced , and the design of drive circuit has realized , a time sequence generator based on STM 32 MCU is designed .At the end of this paper a test is given which shows that the design meets the demand of the CCD timing at low readout speed .The design has the ad-vantages of convenience , low-cost , low power consumption and reliability .
The Design of Electronic Display Screen of Interest Rate, Chinese Characters,Calendar Clock

Chen Ai

2000-01-01

Abstract:This paper analyzes the systemic working principle of the electronic display screen,which can show interest rate,calendar time and Chinese characters. The principle graphics and the software design procedures are introduced,also with thie relational programme flow chart and parts of the programme.
Design of Display Measurement System Based on AT89C52 and CPLD

DONG Cui-xia,TANG Wen-yan,ZHANG Chun-fu,LI Hui-peng

DOI: https://doi.org/10.3969/j.issn.1000-8829.2008.01.019

2008-01-01

Abstract:The LED-chip display measurement system based on CPLD and AT89C52 is developed,which has functions of displaying both tricolor LED-chip and digital,and multi-measuring ranges.The hardware and software design of this system is given,and the key techniques are discussed.And aimed at the inductance sensor measure,measuring circuit is developed.The experimental results prove this system has the higher displaying precision.
Design and Implementation of Simple Digital Oscilloscope Based on STM32

Yan Zhao,Jiang Hua Wang,Kun Li

DOI: https://doi.org/10.4028/www.scientific.net/amr.1079-1080.1038

2014-12-01

Advanced Materials Research

Abstract:The digital oscilloscope adopts STM32 MCU as the control core, uses the IDT7201 for memory, through the AD converter ADS830 real-time sampling achieve the extraction of the input signal and digital storage, display; Crossover functions are realized by CPLD to provide accurate clock for MCU, FIFO, ADS830, and communicate with MCU through SPI agreement. Software design to achieve control A/D converter start-up and storage of the sample data, calculate the frequency and amplitude, buttons and LCD screen.Using Altium Designer software to design and produce a digital oscilloscope printed circuit board PCB, and complete the whole production and commissioning. The digital oscilloscope can be real-time accurate sampling and show the general low frequency signal, can be used when using battery power, small volume, convenient to carry, it can be easily integrated into the experiment box, to become a part of it, and other function modules to form a whole.
Design of LED Timing Dimmer Based on DS1302 and Attiny13

Lin Fangsheng,Jiang Lei,Liu Muqing

DOI: https://doi.org/10.3969/j.issn.1004-440X.2013.04.016

2013-01-01

Abstract:It is often need timing control for a LED streetlight control system.In this case the design of a timer is crucial.By comparison we choose DS1302,a high-performance and low-power real-time clock chip for this work.In this paper we introduce the structure of the whole timer system,and design the interface circuit of Attiny13 and DS1302,and the program in Attiny13.The paper also shows the hardware and software design of DS1302 programming real-time module.Because of this timing system,the LED street lamp may turn on-and-off and PWM dimming at pre-set time,the entire system achieves the purpose of energy saving.
FPGA-based Digital Clock Design

宋克柱

DOI: https://doi.org/10.3969/j.issn.0258-0934.2008.05.029

2008-01-01

Abstract:This paper introduces a new way to design digital clock based on FPGA:DCM(digital clock manager).DCM utilizes fully digital feedback system to acquire de-skew of clocks.It also uses fully digital delay lines allowing robust high-precision control of clock phase and frequency.User can easily program to control clock multiplication,division and phase shift.The implementing schematics and timing simulation wave of DCM are presented.
Serial Communication Controlling LCM Displaying Based on AT89S52

HE Xiu-ling,GAO Huan-zhi,LI Fang,ZHANG Heng

2008-01-01

Abstract:The system realizes serial communication between AT89S52 MCU and PC, and can drive the LCM device to display specifi-cally characters by operating PC end software, which designs to realize the function of the MCU driving drive the LCM device to dis-play characters under PC end. The whole system consist of three parts: PC end software, MCU system, LCM drives .The PC end software uses JAVA2 platform.
Digital Alarm Clock Using Arduino

Pavanteja Penumati

DOI: https://doi.org/10.2139/ssrn.3915584

2021-01-01

SSRN Electronic Journal

Abstract:In this project, we designed an Arduino based Real Time Clock with alarm. A Real Time Clock or RTC is a battery powered clock that measures time even when there is no external power or the microcontroller is reprogrammed. An RTC displays clock and calendar with all timekeeping functions. The battery, which is connected to the RTC is a separate one and is not related or connected to the main power supply.When the power is restored, RTC displays the real time irrespective of the duration for which the power is off. Such Real Time Clocks are commonly found in computers and are often referred to as just CMOS . Most microcontrollers and microprocessors have built in timers for keeping time. But they work only when the microcontroller is connected to power supply. When the power is turned on, the internal timers reset to 0. Hence, a separate RTC chip is included in applications like data loggers for example, which doesn’t reset to 0 when the power is turned off or reset.Real Time Clocks are often useful in data logging applications, time stamps, alarms, timers, clock builds etc. In this project, a Real Time Clock, which displays accurate time and date along with an alarm feature is designed.In this project an attempt is made to develop and explain the use of Digital alarm clock using Arduino.
Long Distance Monitoring and Controlling System Based on AT89S52

XU HAIBO,LIAO CHUANSHU

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.20.026

2007-01-01

Abstract:At now, with the fast development of the applied technology of the Single-chip Microprocessor, the embedded systems with the core of Single-chip Microprocessor have been used in many fields. In this paper, there is a project of a Long Distance Auto-matic Monitoring and Controlling System for Alarm, which is constituted by the AT89S52 and the chip of the DTMF.

Design and implementation of Digital Electronic Clock System based on AT89S52

A design of digital electronic clock

Design of All-digital Clock Recovery Unit Based on USB Device

The design and simulation of a digital electronic clock system based on Proteus and Keil

Design of Multifunction Digital Clock Based on FPGA

Design and implementation of a digital clock showing digits in Bangla font using microcontroller AT89C4051

Digital Perpetual Calendar Design Based on Single Chip Microcomputer

High-Precision Timing System Based on Microcontroller

Design of Microcontroller-based Multi-function Electronic Scales

The Design and Application of an Altimeter System Based on 89C52

Design and Make of the Degital Power Instrument

Design of electronic clock and stopwatch based on FPGA and VHDL language

Design and Implementation of STM32-Based Clock Driver for Frame Transfer Scientific CCD

The Design of Electronic Display Screen of Interest Rate, Chinese Characters,Calendar Clock

Design of Display Measurement System Based on AT89C52 and CPLD

Design and Implementation of Simple Digital Oscilloscope Based on STM32

Design of LED Timing Dimmer Based on DS1302 and Attiny13

FPGA-based Digital Clock Design

Serial Communication Controlling LCM Displaying Based on AT89S52

Digital Alarm Clock Using Arduino

Long Distance Monitoring and Controlling System Based on AT89S52