A stopwatch-based photogate timer

Allen Wootton

DOI: https://doi.org/10.1119/1.1324526

2000-10-01

The Physics Teacher

Abstract:This paper describes the construction of an inexpensive photogate timer that uses a flashlight-infrared phototransistor photogate and a simple electronic circuit that triggers an electronic stopwatch. This photogate timer uses readily available parts and is relatively easy to construct.

What problem does this paper attempt to address?

Design of Adiabatic Timer Based on Three Essential Circuit Elements for Adiabatic Circuits

Peng-jun WANG,Jun-jun YU,Dao HUANG

DOI: https://doi.org/10.3969/j.issn.1006-3080.2007.02.022

2007-01-01

Abstract:To design a low-power timer, an adiabatic flip-flop is designed using the clocked transmission gate adiabatic logic circuit. Based on an analysis of the timer structure on the C54x, a new design scheme of an adiabatic timer is presented using the theory of three essential circuit elements for adiabatic circuits and the characteristics of the clocked transmission gate adiabatic logic circuit and its adiabatic flip-flop. Using the parameters of TSMC 0.25 μm CMOS devices, the adiabatic timer designed based on this theory is simulated by HSPICE. The simulation results indicate that this adiabatic timer has correct logic functions and low power consuming.
Viscometer timer using low‐cost electronic stopwatch

R. J. Gardner,P. C. Senanayake

DOI: https://doi.org/10.1063/1.1138953

IF: 1.6

1986-12-01

Review of Scientific Instruments

Abstract:Light pipes and optical level detectors are used to automatically start and stop a low-cost electronic stopwatch which measures the efflux time of a liquid in a glass capillary viscometer. Operator reaction time is eliminated and viscosities of clear, translucent, or opaque liquids can be measured to ±0.03%. The construction and circuitry are described and sample results for water and butanol are presented.

instruments & instrumentation,physics, applied
GHz Programmable Counter with Low Power Consumption

MA Do,XP Yu,JG Ma,KS Yeo,R Wu,QX Zhang

DOI: https://doi.org/10.1049/el:20031022

2003-01-01

Electronics Letters

Abstract:A high-speed programmable counter with a new reloadable D flip-flop which integrates the programmable function to a true-single-phase-clock (TSPC) D flip-flop is presented. The proposed reloadable D flip-flop is able to operate at higher frequencies with lower power consumption compared to the performance of the existing bitcell. The programmable divide-by-N counter implemented with this reloadable D flip-flop using the Chartered 0.18 mum CMOS process is capable of operating up to 2 GHz for a 1.8 V supply voltage with 4.7 mW power consumption.
High resolution stopwatch for cents

Zoltan Gingl,Katalin Kopasz

DOI: https://doi.org/10.1088/0031-9120/46/4/009

2011-02-10

Abstract:A very low-cost, easy-to-make stopwatch is presented to support various experiments in mechanics. The high-resolution stopwatch is based on two photodetectors connected directly to the microphone input of the sound card. A dedicated free open-source software has been developed and made available to download. The efficiency is demonstrated by a free fall experiment.

Popular Physics,Physics Education,Instrumentation and Detectors
A Novel Inexpensive Camera-Based Photoelectric Barrier System for Accurate Flying Sprint Time Measurement

Tom Uhlmann,Sabrina Bräuer,Falk Zaumseil,Guido Brunnett

DOI: https://doi.org/10.3390/s23177339

2023-08-23

Abstract:This paper introduces a novel approach to addressing the challenge of accurately timing short distance runs, a critical aspect in the assessment of athletic performance. Electronic photoelectric barriers, although recognized for their dependability and accuracy, have remained largely inaccessible to non-professional athletes and smaller sport clubs due to their high costs. A comprehensive review of existing timing systems reveals that claimed accuracies beyond 30 ms lack experimental validation across most available systems. To bridge this gap, a mobile, camera-based timing system is proposed, capitalizing on consumer-grade electronics and smartphones to provide an affordable and easily accessible alternative. By leveraging readily available hardware components, the construction of the proposed system is detailed, ensuring its cost-effectiveness and simplicity. Experiments involving track and field athletes demonstrate the proficiency of the proposed system in accurately timing short distance sprints. Comparative assessments against a professional photoelectric cells timing system reveal a remarkable accuracy of 62 ms, firmly establishing the reliability and effectiveness of the proposed system. This finding places the camera-based approach on par with existing commercial systems, thereby offering non-professional athletes and smaller sport clubs an affordable means to achieve accurate timing. In an effort to foster further research and development, open access to the device's schematics and software is provided. This accessibility encourages collaboration and innovation in the pursuit of enhanced performance assessment tools for athletes.
Design of timer

Tang Jun,Yue Haosong,Li Boyu,Zhang Bei,Li Shumin

DOI: https://doi.org/10.3969/j.issn.1002-4956.2009.06.023

2009-01-01

Abstract:This design adopts a single-chip ARM7-LPC2131 and uses the development board and chip HD7279 to achieve any time of the regular features.The time required from time to time is input by the keyboard,and the next time waiting for the end of the regular input to can be controlled by the switch.
Design and Numerical Verification of a Gate-Controlled Lateral Thyristor for Low-Light Level Detection

Keyang Sun,Liyang Pan,Dong Wu,Jun Xu,Zheyao Wang

DOI: https://doi.org/10.1109/jeds.2021.3114751

2021-01-01

IEEE Journal of the Electron Devices Society

Abstract:Thyristors operated at switching point are highly sensitive to external physical signals such as light or temperature. However, due to the instability of sensitive switching point, conventional thyristors are commonly used as optical switches and hardly applied for low-light level detection. In this work, a silicon-based gate-controlled lateral thyristor (GC-LT), which takes advantage of high sensitivity at low-light, is studied by numerical simulation. A thyristor photodetector circuit and a novel super-off Reset operation method are also proposed to bias the GC-LT over the switching point quickly and allow the photodetector to be operated in a monotonic dynamic multi-sampling mode to achieve high sensitivity to low-light. Simulation results show that the Reset time can be shortened to $ < 10~\mu \text{s}$ without trigging the GC-LT. The trigger time of the photodetector is sensitive to the optical power density ranging from $1\times 10^{-9}$ to $2.5\times 10^{-6}$ W/cm2. Furthermore, the average optical gain is about 8.0-6.3, approximately one order of magnitude higher than that of the Si pinned photodiode.
Single time pixel imaging enabled by repurposing optoelectronic devices

Ryota Keyaki,Susumu Fukatsu

DOI: https://doi.org/10.35848/1882-0786/acdbba

2023-05-22

Abstract:One-time readout temporal ghost imaging is attempted by utilizing optoelectronic devices that are not originally intended for signal photon detection purposes and as such slow by design. A visible light-emitting diode having a response time $\tau$=0.036 ms and a solar cell with $\tau$=3.1ms are used to retrieve a rectangular pulse train, which is otherwise rounded with significant overlapping, in the image of a temporal mask simply by capturing data once at a selected single time effective operation duration are discussed.

Optics
Miniaturized High-Frequency Sine Wave Gating InGaAs/InP Single-Photon Detector.

Wen-Hao Jiang,Xin-Jiang Gao,Yu-Qiang Fang,Jian-Hong Liu,Yong Zhou,Li-Qun Jiang,Wei Chen,Ge Jin,Jun Zhang,Jian-Wei Pan

DOI: https://doi.org/10.1063/1.5055376

2018-01-01

Abstract:High-frequency gating InGaAs/InP single-photon detectors (SPDs) are widely used for applications requiring single-photon detection in the near-infrared region such as quantum key distribution. Reducing SPD size is highly desired for practical use, which is favorable to the implementation of further system integration. Here we present, to the best of our knowledge, the most compact high-frequency sine wave gating (SWG) InGaAs/InP SPD. We design and fabricate an InGaAs/InP single-photon avalanche diode (SPAD) with optimized semiconductor structure and then encapsulate the SPAD chip and a mini-thermoelectric cooler inside a butterfly package with a size of 12.5 mm × 22 mm × 10 mm. Moreover, we implement a monolithic readout circuit for the SWG SPD in order to replace the quenching electronics that is previously designed with board-level integration. Finally, the components of SPAD, the monolithic readout circuit, and the affiliated circuits are integrated into a single module with a size of 13 cm × 8 cm × 4 cm. Compared with the 1.25 GHz SWG InGaAs/InP SPD module (25 cm × 10 cm × 33 cm) designed in 2012, the volume of our miniaturized SPD is reduced by 95%. After the characterization, the SPD exhibits excellent performance with a photon detection efficiency of 30%, a dark count rate of 2.0 kcps, and an afterpulse probability of 8.8% under the conditions of 1.25 GHz gating rate, 100 ns hold-off time, and 243 K. Also, we perform the stability test over one week, and the results show the high reliability of the miniaturized SPD module.
Design and performance of a low-intensity LED driver for detector study purposes

G. Georgiev,V. Kozhuharov,L. Tsankov

DOI: https://doi.org/10.21175/RadProc.2016.21

2018-04-03

Abstract:A custom LED driver producing light pulses with very low intensity and O(10 ns) duration was designed and constructed. A microcontroller was employed to handle the amplitudes and the repetition rates of the output pulses. In addition, it also provided both a PC control of the system through a RS232 interface and an external trigger I/O. A WLS fibre directly coupled to a LED provides unique characteristics of the output light pulse. The combination of a quasi delta light pulse source and physical absorption-emission medium results in an output light profile maximally close to the plastic sctintillators. The light generator is intended to be used to test the response and the rate capability of different photodetectors. Its design, operational characteristics, and stability are described and discussed.

Instrumentation and Detectors
An Optically, Electrically, Magnetically Controllable Dual‐Gate Phototransistor

Chia‐Lin Tsai,Fang‐Chi Hsu,Jia‐Yu Lin,Yu‐Chieh Chao,Yang‐Fang Chen

DOI: https://doi.org/10.1002/aelm.202101378

IF: 6.2

2022-04-07

Advanced Electronic Materials

Abstract:An unconventional phototransistor can be controlled by light, electric and magnetic fields, is proposed, fabricated, and demonstrated. This phototransistor uses a tandem structure composed of an organic solar cell, a resistive random access memory, and a micropyramid structured magnetoelectric film. This device possesses unique logical characteristics showing great potential for information security in the future development of Li‐Fi optical communication.Higher data transmission rates, broader bandwidths, better privacy, and security are indispensable for the current information‐explosive age. However, to achieve the desired functionalities still remains as a great challenge. In this study, a two‐terminal, vertical dual‐gate phototransistor, which can be controlled by light, electric and magnetic fields, is proposed, fabricated, and demonstrated. This phototransistor uses a tandem structure composed of an organic solar cell (OSC) of ITO/ZnO/P3HT:PC61BM/MoO3/Ag, a resistive random access memory (RRAM) of Ag/PMMA/Au and a magnetoelectric film with micropyramid structure of PDMS:FeNi/silver nanowires (AgNWs). This device integrates and couples the properties of each individual component enabling to respond to light, electric and magnetic fields and works as a dual‐gate transistor. Compared with conventional transistors, the proposed device carries several intriguing features, such as ultrafast photoresponse time of 3 µs, controllable photocurrent with a variety of external stimuli, high ON/OFF ratio greater than 103, and touchless human–machine interaction. All of the above features are beneficial for high‐speed optical communication and circuit miniaturization. Furthermore, its unique logical characteristics show great potential for information security in the future development of Li‐Fi optical communication.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
A low-cost shutter driver and arbitrary waveform generator for optical switching using a programmable system-on-chip (PSoC) device

J M Craven,E Meeks,G Delich,E Ayars,H K Pechkis,J A Pechkis

DOI: https://doi.org/10.1063/5.0105884

2022-11-01

Abstract:We have developed a low-cost mechanical shutter driver with integrated arbitrary waveform generation for optical switching and control using a programmable system-on-chip device. This microcontroller-based device with configurable digital and analog blocks is readily programmed using free software, allowing for easy customization for a variety of applications. Additional digital and analog outputs with arbitrary timings can be used to control a variety of devices, such as additional shutters, acousto-optical modulators, or camera trigger pulses, for complete control and imaging of laser light. Utilizing logic-level control signals, this device can be readily integrated into existing computer control and data acquisition systems for expanded hardware capabilities.
Microsecond-resolved smartphone time-gated luminescence spectroscopy

Qisheng Deng,Yulei Liu,Zece Zhu,Xuewen Shu

DOI: https://doi.org/10.1364/OL.467458

2022-07-15

Abstract:Time-gated luminescence spectra are usually measured by laboratory instruments equipped with high-speed excitation sources and spectrometers, which are always bulky and expensive. To reduce the reliance on expensive laboratory instruments, we demonstrate the first, to the best of our knowledge, use of a smartphone for the detection of time-gated luminescence spectra. A mechanical chopper is used as the detection shutter and an optical switch is placed at the edge of the wheel to convert the chopping signal into a transistor-transistor logic (TTL) signal which is used to control the excitation source and achieve synchronization. The time-gated luminescence spectra at different delay times of Eu(TTA)3 powder and the solutions of Eu-tetracycline complex are successfully detected with a temporal resolution of tens of microseconds by the proposed approach. We believe our approach offers a route toward portable instruments for the measurement of luminescence spectra and lifetimes.
An electronic clock for a coded time channel on a magnetic tape recorder

J W Curtis

DOI: https://doi.org/10.1088/0022-3735/3/3/302

1970-03-01

Abstract:An electronic clock that can be used to provide a coded time signal for a timing channel on a magnetic tape recorder is described. The clock provides a direct means of determining the elapsed time, whereas more commonly employed methods of timing do not. The construction of the clock is made practical by the use of integrated circuitry which ensures that it is both compact and low on power consumption.
An RF Timer of Electrons and Photons with the Potential to reach Picosecond Precision

Amur Margaryan,Vanik Kakoyan,Simon Zhamkochyan,Sergey Abrahamyan,Hayk Elbakyan,Samvel Mayilyan,Henrik Vardanyan,Hamlet Zohrabyan,Lekdar Gevorgian,Robert Ayvazyan,Artashes Papyan,Garnik Ayvazyan,Bagrat Grigoryan,John Annand,Kenneth Livingston,Rachel Montgomery,Patrick Achenbach,Josef Pochodzalla,Dimiter L. Balabanski,Satoshi N. Nakamura

DOI: https://doi.org/10.1016/j.nima.2022.166926

2022-05-20

Abstract:This paper describes a new radio frequency timer of keV energy electrons. It is based on a helical deflector, which performs circular or elliptical sweeps of keV electrons, by means of 500 MHz radio frequency field. By converting a time distribution of incident electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing. Streak Cameras, based on similar principles, routinely operate in the ps and sub-ps time domain, but have substantial dead time associated with the readout system. Here, we report a new type of RF timing technique, where the position sensor, consisting of microchannel plates and a delay-line anode, produces ~ns duration pulses with small dead time. Measurements made with sub-ps duration laser pulses, synchronized to the radio frequency power, produced a timing resolution of ~10 ps. This ultra-high precision technique has potential applications in a large variety of scientific devices, and in all cases, electrons are timed and detected simultaneously in the same device.

Instrumentation and Detectors
Stopwatch Verification Platform: The Development of an Automated Device for Stopwatch Calibration

DOI: https://doi.org/10.35940/ijrte.c5500.098319

2019-09-30

International Journal of Recent Technology and Engineering

Abstract:Stopwatch is designed to quantify the elapses time between the start activation and deactivation. To ensure the precision of the time taken, calibration of the device is essential. National Institute of Standard and Technology (NIST) has provide complete guidelines on the stopwatch and timer calibration. However, the standards guidelines usually use manual calibration personnel hence may possibly cause inefficiency for calibration works. The 'Stopwatch Verification Platform' is a prototype aimed to replace the manual handling of digital stopwatch calibration with an automated timer-controlled device, without interfering with NIST recommended practice. The 'Stopwatch Verification Platform' is able to automatically trigger start and stop the reference and test stopwatches by integrating with precise timer controller and specific relay connections. The timer controller circuitry is integrated with the reference stopwatch circuitry, with 0.001 second resolutionIt is capable in verifying more units of stopwatches by using one reference. The measurement procedures do not contradict with the NIST recommended practice. This prototype does not alter the uncertainties calculation because it is a well-developed standard formula which is set by international standard
A Study for the Detection of Ionizing Particles with Gate-Controlled Phototransistor on Soi Substrate

Litao Zhang,Liyang Pan,Keyang Sun

DOI: https://doi.org/10.1063/1.4981550

2017-01-01

Abstract:We report on a novel gate-controlled phototransistor, which is designed to detect high energy ionizing particles. The device is investigated by simulations with TCAD tools. The simulation results exhibit a significant amplification and the magnification can be controlled by the voltage applied to the gate contact. The device can be also proposed to detect the photons.
Microcontroller interrupts for flexible control of time critical tasks in experiments with laser cooled atoms

Mark Sadgrove

DOI: https://doi.org/10.48550/arXiv.1104.0064

2011-04-01

Abstract:I detail applications of timer interrupts in a popular micro-controller family to time critical applications in laser-cooling type experiments. I demonstrate a low overhead 1-bit frequency locking scheme and a multichannel experimental sequencer using the timer-counter intterrupts to achieve accurate timing along with flexible interfaces. The general purpose nature of micro-controllers can offer unique functionality compared with commercial solutions due to the flexibility of a computer controlled interface without the poor latencies associated with computer timing.

Instrumentation and Detectors,Atomic Physics
Advanced picosecond precision Radio Frequency Timer

S. Zhamkochyan,V. Kakoyan,S. Abrahamyan,H. Elbakyan,G. Ayvazyan,R. Ayvazyan,A. Ghalumyan,A. Kakoyan,S. Mayilyan,A. Papyan,A. Piloyan,H. Rostomyan,A. Safaryan,G. Sughyan,H. Vardanyan,H. Zohrabyan,J. Annand,K. Livingston,R. Montgomery,P. Achenbach,J. Pochodzalla,D.L. Balabanski,S.N. Nakamura,A. Aprahamian,M. Brodeur,V. Sharyy,D. Yvon,A. Margaryan

DOI: https://doi.org/10.1088/1748-0221/19/02/c02014

2024-02-03

Journal of Instrumentation

Abstract:A new type of radio frequency (RF) timing technique is presented. It is based on a helical deflector, which performs circular or elliptical sweeps of photo- or secondary electrons, accelerated to keV energies, by means of RF fields in the 500–1000 MHz range. By converting a time distribution of the electrons to a hit position distribution on a circle or ellipse, this device achieves extremely precise timing, similar to streak cameras. Detection of the scanned electrons, using a position sensitive detector based on microchannel plates and a delay line anode, resulted in a timing resolution of 10 ps, which can be potentially improved to 1 ps. RF-Timer-based single photon and heavy ion detectors have potential applications in different fields of science and industry, which include high energy nuclear physics and imaging technologies. This technique could play a crucial role in developing of sub 10 ps Time-of-Flight Positron Emission Tomography.

instruments & instrumentation
Flexible Transient Phototransistors by Use of Wafer-Compatible Transferred Silicon Nanomembranes

Gongjin Li,Enming Song,Gaoshan Huang,Ruobing Pan,Qinglei Guo,Fei Ma,Bin Zhou,Zengfeng Di,YongFeng Mei

DOI: https://doi.org/10.1002/smll.201802985

IF: 13.3

2018-01-01

Small

Abstract:Flexible transient photodetectors, a form of optoelectronic sensors that can be physically self-destroyed in a controllable manner, could be one of the important components for future transient electronic systems. In this work, a scalable, device-first, and bottom-up thinning process enables the fabrication of a flexible transient phototransistor on a wafer-compatible transferred silicon nanomembrane. A gate modulation significantly restrains the dark current to 10-12 A. With full exposure of the light-sensitive channel, such a device yields an ultrahigh photo-to-dark current ratio of 107 with a responsivity of 1.34 A W-1 (λ = 405 nm). The use of a high-temperature degradable polymer transient interlayer realizes on-demand self-destruction of the fabricated phototransistors, which offers a solution to the technical security issue of advanced flexible electronics. Such demonstration paves a new way for designing transient optoelectronic devices with a wafer-compatible process.

A stopwatch-based photogate timer

Design of Adiabatic Timer Based on Three Essential Circuit Elements for Adiabatic Circuits

Viscometer timer using low‐cost electronic stopwatch

GHz Programmable Counter with Low Power Consumption

High resolution stopwatch for cents

A Novel Inexpensive Camera-Based Photoelectric Barrier System for Accurate Flying Sprint Time Measurement

Design of timer

Design and Numerical Verification of a Gate-Controlled Lateral Thyristor for Low-Light Level Detection

Single time pixel imaging enabled by repurposing optoelectronic devices

Miniaturized High-Frequency Sine Wave Gating InGaAs/InP Single-Photon Detector.

Design and performance of a low-intensity LED driver for detector study purposes

An Optically, Electrically, Magnetically Controllable Dual‐Gate Phototransistor

A low-cost shutter driver and arbitrary waveform generator for optical switching using a programmable system-on-chip (PSoC) device

Microsecond-resolved smartphone time-gated luminescence spectroscopy

An electronic clock for a coded time channel on a magnetic tape recorder

An RF Timer of Electrons and Photons with the Potential to reach Picosecond Precision

Stopwatch Verification Platform: The Development of an Automated Device for Stopwatch Calibration

A Study for the Detection of Ionizing Particles with Gate-Controlled Phototransistor on Soi Substrate

Microcontroller interrupts for flexible control of time critical tasks in experiments with laser cooled atoms

Advanced picosecond precision Radio Frequency Timer

Flexible Transient Phototransistors by Use of Wafer-Compatible Transferred Silicon Nanomembranes