Design of timer

Tang Jun,Yue Haosong,Li Boyu,Zhang Bei,Li Shumin

DOI: https://doi.org/10.3969/j.issn.1002-4956.2009.06.023

2009-01-01

Abstract:This design adopts a single-chip ARM7-LPC2131 and uses the development board and chip HD7279 to achieve any time of the regular features.The time required from time to time is input by the keyboard,and the next time waiting for the end of the regular input to can be controlled by the switch.

What problem does this paper attempt to address?

Design of Adiabatic Timer Based on Three Essential Circuit Elements for Adiabatic Circuits

Peng-jun WANG,Jun-jun YU,Dao HUANG

DOI: https://doi.org/10.3969/j.issn.1006-3080.2007.02.022

2007-01-01

Abstract:To design a low-power timer, an adiabatic flip-flop is designed using the clocked transmission gate adiabatic logic circuit. Based on an analysis of the timer structure on the C54x, a new design scheme of an adiabatic timer is presented using the theory of three essential circuit elements for adiabatic circuits and the characteristics of the clocked transmission gate adiabatic logic circuit and its adiabatic flip-flop. Using the parameters of TSMC 0.25 μm CMOS devices, the adiabatic timer designed based on this theory is simulated by HSPICE. The simulation results indicate that this adiabatic timer has correct logic functions and low power consuming.
A Clock Isolation Technique for Low Power SoC Design

Shen Hai-bin

2006-01-01

Abstract:In some complex SoC designs,embedded memories,especially dual access RAMs(DARAM) for low power applications,are usually used.Therefore,it is unavoidable to use clock's rise and fall edges to switch between different read/write data.However,this as data situation will cause serious problems in timing closure,particularly during logic and physical synthesis.To solve these problems,a clock isolation circuit was developed.The clock isolation method has been verified to reduce the timing closure iterations and the complexity of design flow.
High-Precision Timing System Based on Microcontroller

Rui Cao

DOI: https://doi.org/10.4028/www.scientific.net/amr.546-547.131

2012-07-01

Advanced Materials Research

Abstract:The task of timing system is countdown on a set date and showing the time from current date to the setting date to enhance people’s attention and sense of urgency. A kind of high-precision timing system is introduced. The system is controlled by single-chip microcontroller. High integration clock chip is used as clock module. System hardware design and software design are introduced. System hardware design includes design of clock module, its connection with single-chip microcomputer, and the design of display module. System software design includes the settings of single-chip serial port, its initialization, the reading and writing of the clock module, the countdown program and the display program. Compared with other timing system which consists of frequency demultiplication by multivibrator, this system is more stable and reliable. The accumulative error is zero when long-time running continuously. Because the system control module is simple, it is convenient to be developed and utilized. Practice shows that this high-precision timing system can meet practical needs well.
Design of multi-functional portable electronic experimental box based on Labview and ARM

Jiang Junmin,Hao Ziyi,Lan Fan,Yao Yingying

DOI: https://doi.org/10.3969/j.issn.1672-1438.2011.07.022

2011-01-01

Abstract:The multi-functional portable electronic experimental box is based on ARM7 LPC2148 32-bit microcontroller,integrating DDS digital phase synthesis signal generator AD9850,cooperating with computer's communication system and the sound card's signal collection system,and making use of a computer host process developed by Labview.After data collection,computer programs process and display the data to work as a virtual oscilloscope.The whole system and the circuit boards equipped with the common devices are placed in a small box,providing portable test environment.It brings convenience to the basic electronic experimental class presentation and students' independent experiments and has brought about a innovaton model of interactive practice in the teaching of electronic technology courses.
A design of digital electronic clock

Zhao Shu-fan

Abstract:The system is made up by silicon crystal oscillator,frequency divider,number counter,decipherer,LED indicator and calibrated circuit and utilizes the medium-sized and small-sized integruted chip of CMOS series(double-row plug-in).The design for the overall project is composed of two parts the main circuit and the expanded circuit.The main circuit carries on the basic function of the digital electronic clock and the expanded circuit carries on the expanded function of it.Each unit is designed and the overall adjustment is performed.

Computer Science,Engineering
Design of a General Timer Based on Auxiliary Clock in VxWorks

Shan Qin

2014-01-01

Abstract:The OS of VxWorks finds wide applications owing to its good real-time performance and flexibility, but it dose not offer a common timer. This paper designs a common timer module based on auxiliary clock on the base of analyzing of several timers by utilizing interrupt of auxiliary clock and creating time-node and node list for an accurate timer for VxWorks system in certain airborne launcher's controller. Testing results show that the common timer module realizes the ms-timer,which satisfies the requirement of accurate timer for certain airborne launcher's controller.
Design of Stepper Motor Subdivision Control System Based on ARM

XU Zu-hua,XIAO Zhi-hua,SU Ze-guang

2006-01-01

Abstract:A stepper motor subdivision control system has been designed in this paper,which is based on ARM7 chip LPC2214 and the LMD18245 electrical machinery special-purpose driver chip.The "linear + sine" wave driver method and the electric current vector constant breadth algorithm is used in this system.The digital wave data is generated by ARM controller,which is converted to corresponding control voltage.The voltage is enlarged by driver chip LMD18245 to drive the two-phase stepper motor.The control sign is input by the keyboard,and the frequency and the subdivided multiple are displayed by liquid crystal.The software based on uCLinux and MiniGUI platform is designed.Multi-purpose control of the stepper motor and 4096 subdivision multiple are realized in the system.
Design of LED Timing Dimmer Based on DS1302 and Attiny13

Lin Fangsheng,Jiang Lei,Liu Muqing

DOI: https://doi.org/10.3969/j.issn.1004-440X.2013.04.016

2013-01-01

Abstract:It is often need timing control for a LED streetlight control system.In this case the design of a timer is crucial.By comparison we choose DS1302,a high-performance and low-power real-time clock chip for this work.In this paper we introduce the structure of the whole timer system,and design the interface circuit of Attiny13 and DS1302,and the program in Attiny13.The paper also shows the hardware and software design of DS1302 programming real-time module.Because of this timing system,the LED street lamp may turn on-and-off and PWM dimming at pre-set time,the entire system achieves the purpose of energy saving.
Design of Multifunction Digital Clock Based on FPGA

纪欣然,丁一,梁致源

DOI: https://doi.org/10.3969/j.issn.1674-6236.2012.16.056

2012-01-01

Abstract:This paper briefly introduces a design scheme of multifunction digital clock based on FPGA. On the basis of achieving basic functions such as timing, adjusting and chronopher, the scheme brings in new world-time function, which can convert Beijing Time to GMT quickly. The design input method of the scheme combines VHDL and block diagram. The digital clock is designed, compiled as well as simulated under Quartus II development environment, and tested on the FPGA hardware development board. The experiment verifies the design scheme, which offers references for the application of FPGA and the design of digital clock.
Digital Perpetual Calendar Design Based on Single Chip Microcomputer

Jijin Zhu

Abstract:The twenty-first century is an era of highly advanced electronic development. People's pursuit of tools has also become simple, convenient, and efficient [1]. However, the concept of time is getting deeper and deeper. People have become more and more focused on time, which has prompted the development of clocks. This design and production is based on STC89C52 as the core, DHT11, DS1302 realize temperature and humidity, time data acquisition system, and with the key circuit, power circuit, reset circuit, amplifier circuit composed of multi-function calendar system, the final completion of the day and month through the LCD display , Year, Hours, Minutes, Seconds, Temperature and Humidity, etc. This design decided to adopt the one-chip computer STC89C52 as the main control system, adopt LCD12864 liquid crystal display screen as the display module and offer the final data to user, the clock module adopts DS1302 clock chip to connect AT89C52 to finish the computational function of the time, the temperature and humidity collection adopts the sensor DHT11 chip , using 3 ~ 5V DC power supply for the microcontroller and other chips to complete, so as to achieve multi-function calendar function.

Computer Science,Engineering
The design and simulation of a digital electronic clock system based on Proteus and Keil

Yuan Qiu-feng

Abstract:Proteus and Keil are the main tools for developing single chip microcomputer systems.They have such characteristics as saving cost,reducing development cycle and increasing success rate of design.In this paper,a digital electronic clock system is designed and simulated,with AT89C51,DS1302 and LCD 1602 as the main components.

Computer Science,Engineering
Design of electronic clock and stopwatch based on FPGA and VHDL language

Hanchen Kang

DOI: https://doi.org/10.1088/1742-6596/2649/1/012035

2023-12-07

Journal of Physics Conference Series

Abstract:This paper designs a simple system that can include electronic clock and stopwatch based on FPGA(Field Programmable Gate Array) and VHDL(Very-High-Speed Integrated Circuit Hardware Description Language). The first chapter briefly introduces the research background. The second chapter introduces the theoretical basis of digital circuits and the hardware and software platform used in this paper. In the third chapter, the design of each sub-module of the system and the overall design of the system are carried out. This chapter is the core chapter of this article, which describes the functions of the module and explains the input and output ports. In this chapter, a core point of digital circuit design is reflected: combining modules that realize simple functions into modules that can realize complex functions. And integrate sub-modules that realize similar functions into a top-level module. The fourth chapter is the logic synthesis of the circuit. The fourth chapter shows the simulation of the core module function and the simulation of the system output. The conclusion section summarizes the interesting parts of the design of this paper.
Design of Control System of Loom Machine Based on ARM

CHI Zhe-gui,LIU He-jin,ZHANG Sen-lin

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.11.005

2005-01-01

Abstract:Based on the reliable function and simple design,taking good advantages of the advanced controller and control technology,a loom machine system design based on ARM is presented in this paper,which uses S3CEV40 of EMBEST Company as a centre part and functional models as periphery,making up of the hardware part and composed according to the technical procedure.The IO expandance based on CPLD make the whole system flexible and powerful.Motor driver module is another major component of this system.It adopts ARM chip-based frequency vector control strategy.In software,it servo controls motor in interrupt mode.It is turned out to be reliable in function and simple in implement by practice.
Intelligent electronic perpetual calendar

焦再强,施俊国,王启银

2012-12-10

Abstract:The utility model discloses an intelligent electronic perpetual calendar. The intelligent electronic perpetual calendar comprises a microcontroller, a crystal oscillator module, a reset switch, a power supply module, a clock chip, an LED display screen, a nixie tube, a loudspeaker, a voice module, a FLASH memory and a ZigBee reception module. The intelligent electronic perpetual calendar makes updating and setting of time of an electronic perpetual calendar more convenient and accurate, can realize personalized user customization for voice time telling function and alarm function and can realize remote control and change of a background of the electronic perpetual calendar; all functions above can be realized with no need for taking the calendar down from a wall, operation can be realized on a computer only through a wireless module, so operation convenience and timing accuracy are greatly improved for a user wholly.

Computer Science,Engineering
Design and implementation of Digital Electronic Clock System based on AT89S52

Liu De-cang

Abstract:It was desgined a Digital Electronic Clock System using AT89S52 MCU made by the ATMEL corporation and RTC DS12887 made by the DALLAS corporation,which presented the diagram of applied circuit principle and software design and implemented the date,time display and reported time.

Computer Science,Engineering
Research on STM32 Development Board Based on ARM Cortex-M3

Zengfa Gao,Zhang Bo,Zhuoya Liu,Baoqing Deng,Yuchuan Jia

DOI: https://doi.org/10.1109/ICCASIT50869.2020.9368860

2020-10-14

Abstract:With the improvement of science and technology, the application of ARM is more and more extensive, Cortex-M3 is a new product launched by ARM. Cortex-M3 is a 32-bit processor core, using ARMv7-M architecture, which has high advantages in low cost and low power consumption. In this paper, the ARM Cortex-M3 and STM32 microcontrollers are studied. By selecting a semiconductor STM32 F103ZET6 development board, the basic module GPIO of STM32 is studied, and then the timer is used to generate PWM (pulse width modulation) output. PWM is an effective technique that uses the digital output of a microprocessor to get command of analog circuits, and is widely applied in many fields from measurement and communication to rate of work command and conversion. Therefore, the study of PWM technology has very important practical significance [1] [2]. The time of the timer is the period of the PWM. By calculating the square wave frequency and duty cycle, the timer and IO port are configured, and finally the PWM output is completed.

Engineering,Computer Science
The Design of Control System Based on ARM and High-speed Pulse Generator

金晟,傅建中,陈子辰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.02.015

2005-01-01

Abstract:This paper introduces a new design for four axes control system based on ARM and high-speed Pulse Generator. In this design, ARM is main CPU, and Pulse Generator is subordination CPU. By using real-time operating system μC/OS, system can be good at dealing with multitask and the real time of system controlling.
Microcontroller-based multi-language clock-calendar

A.R. Al-Ali,J.M. Bakhashwain

DOI: https://doi.org/10.1109/30.267408

1993-01-01

IEEE Transactions on Consumer Electronics

Abstract:A single-chip microcontroller-based Arabic, Chinese, English and Hindi clock-calender system is developed and implemented. The system is designed and programmed in such a way that it enables the user to select the desired numerical system and set the corresponding time and date. The system is capable of generating and displaying the time and date of any one of the four languages format: English, Arabic, Hindi or Chinese. This system can be integrated using VLSI technology to build a compact single chip multi-language clock-calender.<>

telecommunications,engineering, electrical & electronic
Design and Make of the Degital Power Instrument

Jun Zhu

2006-01-01

Abstract:The design applies a timer branch analog multiplier as the kernel and applies CMOS dual slope A/D converter ICL7107 to driver the single from analog to digital and driver the LED for display.In this disquisition we will introduce the design and make and experiment of the 3 and half digital power instrument.
A Method of Interactive Interface for Embedded ControIIer

吴波,许力

DOI: https://doi.org/10.3969/j.issn.1001-182X.2014.06.013

2014-01-01

Abstract:This paper proposes a generaI framework design for LCD muIti-IeveI menu,aiming at the design for interactive interface of controI er based on ARM.Then this paper puts forward a method for efficient keystrokes and interactive input,which can avoid traditionaI keys' jitter as weI as improve the utiIizationof I/O portby appIying touch keys,and take advantage of the structure variabIe in the C Ianguage to set the parameters.Themethod has got practicaI appIicationin the design of the ten-sion controI er system.

Design of timer

Design of Adiabatic Timer Based on Three Essential Circuit Elements for Adiabatic Circuits

A Clock Isolation Technique for Low Power SoC Design

High-Precision Timing System Based on Microcontroller

Design of multi-functional portable electronic experimental box based on Labview and ARM

A design of digital electronic clock

Design of a General Timer Based on Auxiliary Clock in VxWorks

Design of Stepper Motor Subdivision Control System Based on ARM

Design of LED Timing Dimmer Based on DS1302 and Attiny13

Design of Multifunction Digital Clock Based on FPGA

Digital Perpetual Calendar Design Based on Single Chip Microcomputer

The design and simulation of a digital electronic clock system based on Proteus and Keil

Design of electronic clock and stopwatch based on FPGA and VHDL language

Design of Control System of Loom Machine Based on ARM

Intelligent electronic perpetual calendar

Design and implementation of Digital Electronic Clock System based on AT89S52

Research on STM32 Development Board Based on ARM Cortex-M3

The Design of Control System Based on ARM and High-speed Pulse Generator

Microcontroller-based multi-language clock-calendar

Design and Make of the Degital Power Instrument

A Method of Interactive Interface for Embedded ControIIer