Abstract:Many engineering structural parts, such as internal gear pumps, worked in high-salt and high-temperature environments. The material (40Cr) of the parts in the pump failed due to severe wear and corrosion. To improve the wear resistance and corrosion resistance of 40Cr, the FeCoNiCrMo x ( x = 0, 0.3, 0.6, 0.9, 1.2) HEAs coatings were deposited on the surface of 40Cr by laser cladding technology, and the phase structure, microstructure and hardness of the coatings were investigated. In addition, friction and wear tests, electrochemical tests and neutral salt spray tests were conducted to investigate the effect of Mo content on the wear resistance and corrosion resistance of the coatings. The results showed that the phase structure of the FeCoNiCrMo 0 coating was the FCC phase, and the phase of the FeCoNiCrMo x ( x = 0.3, 0.6, 0.9, 1.2) coatings were composed of the FCC phase and σ phase. The Mo element was enriched in interdendrite. With the increasing content of Mo elements, solid solution strengthening, fine grain strengthening, and second phase strengthening occurred in the coatings, which led to the increased hardness and wear resistance of the coatings. The FeCoNiCrMo 1.2 coating had the best wear resistance. In the 3.5%NaCl solution, the corrosion resistance of the coatings was better than that of the substrate. With the increase of Mo content, the corrosion potential of the coatings drifted positively, the corrosion current density decreased, and the corrosion resistance increased. However, with excessive Mo element content, the σ phase will precipitate, leading to galvanic coupling corrosion of the coatings and reducing the corrosion resistance. Because the FeCoNiCrMo 0.9 coating had the highest corrosion potential and the lowest corrosion current density. Therefore, it had the best corrosion resistance. The neutral salt spray test result also showed that the corrosion resistance of the FeCoNiCrMo 0.9 coating was the best.

Microstructure, abrasive wear and corrosion characterisation of laser metal deposited Fe-30Cr-6Mo-10Ni-2.2C alloy

Microstructural Evolution and Properties of Novel Ferritic Stainless Steel - Mox Prepared by Laser Melting Deposition

Microstructure and mechanical properties of Fe3Al based alloy fabricated by laser metal deposition

Microstructures and Mechanical Properties of CrMnFeCoNi High Entropy Alloys Fabricated Using Laser Metal Deposition Technique

Microstructure Evolution and Enhanced Wear Resistance of Al2CrFeNiMo High Entropy Alloy Coating Fabricated by Laser Cladding

Microstructure, wear and electrochemical behaviors of laser cladding Fe-based coatings with various molybdenum contents

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

Microstructure evolution and high temperature corrosion behavior of FeCrBSi coatings prepared by laser cladding

Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding

MICROSTRUCTURE AND HIGH-TEMPERATURE WEAR BEHAVIOR OF FE-BASED AMORPHOUS COATINGS BY LASER CLADDING

Microstructure, corrosion resistance and wear properties of laser directed energy deposited CrCoNi medium-entropy alloy after cyclic deep cryogenic treatment

Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding

Microstructure and Soil Wear Resistance of a Grey Cast Iron Alloy Reinforced with Ni and Cr Laser Coatings

Investigation on the microstructure, wear and corrosion resistance of FeCoNiCrMox high-entropy alloy coatings deposited on 40Cr by laser cladding

Research on process optimization and microstructure of CrCoNi medium-entropy alloy formed by laser metal deposition

Laser metal deposition of thin-walled parts of Al 0.8 CrFe 2 Ni 2 high-entropy alloy: Process window, microstructure, wear resistance and mechanical anisotropy

Microstructure and Wear Resistance of Laser Cladding of Fe-Based Alloy Coatings in Different Areas of Cladding Layer

Effect of heat treatment on microstructure and mechanical properties of Fe–Cr–Ni–Co–Mo maraging stainless steel produced by selective laser melting

Microstructure, Hardness, Wear Resistance, and Corrosion Resistance of As-Cast and Laser-Deposited FeCoNiCrAl0.8Cu0.5Si0.5 High Entropy Alloy

Microstructure Evaluation and High-Temperature Wear Performance of Hard Protective Layer Deposited on Titanium Alloy via Laser Metal Deposition

Wear and Corrosion Resistant Eutectic High-Entropy Alloy Al0.3CoCrFeNiMo0.75 Produced by Laser Metal Deposition and Spark-Plasma Sintering