Abstract:In micro-electrical discharge machining (micro-EDM) milling, the cross-section of the microgroove machine is frequently not an ideal rectangle. For instance, there are arc shapes on the bottom and corners, and the sidewall is not steep. The theoretical explanation for this phenomenon is still lacking. In addition to the tip discharge effect, the essential reason is that there is an accumulative difference in time and space during the shape change process of a tool electrode and the microstructure formation on a workpiece. The process parameters are critical influencing factors that determine this accumulative difference. Therefore, the accumulative difference mechanism in time and space is investigated in this paper, and then a theoretical model is developed to simulate the micro-EDM milling process with a straight-line single path. The simulation results for a cylindrical electrode at the two rotational speeds of 0 (nonrotating) and 300 rpm are compared, while the results for a cylindrical electrode and a square electrode at a rotation speed of 0 are also compared to verify that different process parameters generate accumulative differences in the time and space of material removal. Finally, micro-EDM milling experiments are carried out to verify the simulation model. The maximum mean relative deviation between the microgroove profiles of simulation results and those of experiments is 11.09%, and the profile shapes of simulations and experiments have a good consistency. A comparative experiment between a cylindrical electrode and a hollow electrode is also performed, which further verifies the mechanism revealed in the study. Furthermore, the cross-section profile of a microgroove can be effectively controlled by adjusting the process parameters when utilising these accumulative differences through fabricating a microgroove with a V-shaped cross-section by a square electrode and a microgroove with a semi-circular cross-section by a cylindrical electrode. This research provides theoretical guidance for solving the problems of the machining accuracy of detail features in micro-EDM milling, for instance, to machine a microgroove with an ideal rectangular cross-section.

Experimental Investigation on Rotating Electrochemical Etching of a Micro Spiral Cylindrical Electrode

Formation Mechanism and Simulation of Oxide Film in Electrodeless ELID Grinding

A study on wire electrochemical micromachining for fabrication of microgrooves

Study of Mass Transfer Enhancement of Electrolyte Flow Field by Rotating Cathode in Through-Mask Electrochemical Micromachining

Simulation study on cathode structure optimization of aluminum alloy thin-walled internal spiral deep hole electrochemical machining

Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode

Improving surface integrity of micro-holes in ECDM using ultrahigh-speed rotary of tool cathode and non-water-based electrolyte

Improving flatness of machined surface in rotating cathode electrochemical milling

Improvement on leveling ability in counter-rotating electrochemical machining by using a variable voltage

Effect of Anisotropically-etched Silicon Electrode on Electrolytic Products Flow in Micro ECM

Experimental investigation of rotary sinking electrochemical discharge milling with high-conductivity salt solution and non-pulsed direct current

Theoretical and experimental study on micro ultrasonic-assisted electrochemical drilling with high speed electrode

Investigation of inner-jet electrochemical face grinding of thin-walled rotational parts

Electrochemical micro-machining of high aspect ratio micro-tools with a reverse conical shape tip using electrolyte liquid membrane

Improvement on profile accuracy of convex structure during counter-rotating electrochemical machining by periodically changing electrolyte flow direction

Study on improving the surface roughness of multi-stage internal cone hole by rotating magnetic field assisted electrochemical machining

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

The development of electrochemical etching technology and equipment

An Investigation into Accumulative Difference Mechanism in Time and Space for Material Removal in Micro-EDM Milling

Novel Structure Of A Sidewall-Insulated Hollow Electrode For Micro Electrochemical Machining

Silicon-based Tool Electrodes for Micro Electrochemical Machining