Abstract:In recent developments, Cu–Cr–Nb alloys have emerged as promising materials offering a desirable balance between mechanical properties and electrical conductivity, rendering them suitable for intricate high heat flux applications. However, the laser additive manufacturing of Cu–Cr–Nb alloys has encountered notable challenges, primarily stemming from limitations associated with Cu–Cr–Nb alloy powders. Recognizing the pivotal role of powder feedstock in additive manufacturing, this study exerts the utilization of ball milling techniques to tackle pertinent challenges. Specifically, a kind of powder obtained by mechanical ball milling of elemental powders of Cu, Cr and Nb is employed to fabricate Cu–Cr–Nb raw materials, which exhibits a distinctive sesame ball structure and effectively mitigates the inherent high reflectivity of Cu powder. The resulting milled powder represents a notable departure from the conventional reliance on argon gas atomization for Cu–Cr–Nb alloy powder production. Then the study encompasses the fabrication of five distinct Cu–Cr–Nb bulk alloys, ranging from Cu–1Cr–0.5Nb to Cu–12Cr–6Nb, using laser directed energy deposition. The as-printed Cu–Cr–Nb alloys exhibit commendable density, surpassing 99% based on visual analysis, and demonstrate mechanical properties akin to casts achieved through traditional melting and powder metallurgy methods. Notably, Cr 2 Nb particles were observed within all bulk alloys, with their size increasing proportionally with the Cr + Nb content. Tensile strength demonstrated a positive correlation with Cr + Nb content, while elongation and conductivity exhibited an inverse relationship. These findings hold considerable promise for advancing the utilization of Cu–Cr–Nb alloys in various applications requiring tailored performance characteristics.

Modification of Electrical and Mechanical Properties of Selective Laser‐Melted CuCr0.3 Alloy Using Carbon Nanoparticles

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Effect of Process Parameters on the Microstructure and Properties of Cu–Cr–Nb–Ti Alloy Manufactured by Selective Laser Melting

Tailoring the tribology property and corrosion resistance of selective laser melted CoCrMo alloys by varying copper content

Performance improvement of laser additive manufactured Cu‒Cr alloy via continuous extrusion

The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy

The Effect of Laser Remelting during SLM on Microstructure and Mechanical Properties of CoCrFeNiNb0.25

Enhanced hardness and moderate thermal conductivity of Cu-2.4Ni-0.7Si alloy processed via selective laser melting followed by suitable heat treatment

Laser–Direct Current arc Hybrid Additive Manufacturing of Cu-Cr-Zr Alloy: Microstructure Evaluation and Mechanical Properties

Reducing cracking sensitivity of CM247LC processed via laser powder bed fusion through composition modification

Selective laser melting of CuCrZr alloy: processing optimisation, microstructure and mechanical properties

Enhanced mechanical properties and strengthening mechanism of Cu-Ni-Si alloy with trace chromium addition

Laser powder bed fusion of electrically/thermally conductive component by developing inert Cr 2 O 3 -coated Cu powder

Fabrication of iron-based amorphous reinforced CoCrNi medium-entropy alloys by selective laser melting: Enhancement of mechanical properties and improvement of corrosion resistance

A Micro-Computed Tomography Comparison of the Porosity in Additively Fabricated CuCr1 Alloy Parts Using Virgin and Surface-Modified Powders

The mechanical and functional behaviors of Mn–15 wt.%Cu alloy produced by selective laser melting

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Effect of heat treatments on microstructure, mechanical and electrical properties of Cu–Cr–Zr alloy manufactured by laser powder bed fusion

Laser additive manufacturing of Cu–Cr–Nb alloys by using elemental powder

Effect of Co-content on microstructure, phases, and mechanical properties of laser additive manufactured Co x (CrNi) 100-x alloy

Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys