Abstract:This study presented the UV‐initiated methods to graft polyacrylamide (PAM) hydrogel on the surface of polyester (PET) fibers toward the one‐step and the two‐step methods. The results of the study indicate that PAM hydrogels can enhance the hydrophilic property of PET fibers. Additionally, the modified PET fibers exhibit the swelling properties. It is widely recognized that polyester (PET) fibers with swelling properties are necessary for advanced applications of PET fibers in waterproof fabrics. This study presented the UV‐initiated methods to graft polyacrylamide (PAM) hydrogel on the surface of PET fibers. In the one‐step method, PET fibers are impregnated with a mixed solution of the photoinitiator benzophenone (BP) and the monomer acrylalkylamine (AM). Then, the PET fiber was directly exposed to UV light. In the two‐step method, PET fibers were first impregnated with a photoinitiator solution to generate BP radicals. Then, the fibers impregnated with a monomer solution before being grafted by UV light. Both two methods ultimately achieve PAM gelation‐modified PET fibers. The chemical composition and surface structure were detected by Fourier transform infrared spectroscopy and scanning electron microscope. The findings demonstrate that the PAM hydrogel was successfully grafted on the PET fibers through one‐step method or a two‐step method. In addition, the properties of the grafted PET fibers were evaluated by grafting yield, contact angle, and swelling test. The study indicated that the modified PET fibers via a two‐step method exhibited a superior grafting yield up to 29.3% (PET‐2n) and 54% (PET‐2) compared to the one‐step technique (PET‐1). It was shown that the grafting efficacy of PET fibers modified by two‐step method is better than one‐step method. The static contact angles of PET fibers by UV‐Induced were all reduced. For instance, the contact angles of PET‐2n were decreased from 115° to 62.9°; and the two‐step modified PET fiber after acetone cleaning (PET‐2) decreased from 115° to 60°. It was suggested that the hydrophilicity of the modified PET fibers significantly increased. In addition, the research shows that the gelation‐modified fibers were all possessed swelling properties.

Synthesis and Application of Benzotriazole UV Absorbers to Improve the UV Resistance of Polyester Fabrics

Synthesis of Semi-Aromatic Copolyester with High Molecular Weight

Synthesis of 2, 3-dibromo-succinic anhydride and application on cotton, polyester and polyester/cotton blended fabric

Radiation Grafting of Glycidyl Methacrylate and Divinylbenzene Onto Polyethylene Terephthalate Fabrics for Improving Anti-Dripping Performance

Preparation and properties of polyester fibers with polyacrylamide hydrogel grafted by UV‐irradiation

Anti-dripping PET Fabrics Prepared by Two Steps Radiation-induced Grafting

Excellent UV-absorbing cotton fabric with high durability and hydrophobicity based on surface-initiated ATRP of polymerizable organic UV-absorber

Hydrophilic Modification of Polyester/Polyamide 6 Hollow Segmented Pie Microfiber Nonwovens by UV/TiO2/H2O2

One-Pot Preparation of Benzotriazole-Modified Porous Silica for Durable UVA Absorption Ability

Toward a Sustainable Approach for Durably Hydrophilic and UV Protective PET Fabric through Surface Activation and Immobilization Integrating Epigallocatechin Gallate and Citric Acid

Durable Moisture-wicking and Fast-dry Polyester Fabric Prepared by UV-induced Click Reaction

Preparation of New Hydrophilic PET Fiber by Grafting with Acrylic Acid and Modification with Amino Groups for Improvement of Dyeing Ability

Fully bio-based flame retardant and antibacterial coating for polyethylene terephthalate fabric

Study on polyester fabric grafted with acrylic acid initiated by ultraviolet light

Environmental benign foam finishing with a hyperbranched polyphosphonate flame retardant for polyethylene terephthalate fabric

Durable flame retardant and anti-dripping of PET fabric using bio-based covalent crosslinking intumescent system of chitosan and phytic acid

Durable flame retardant treatment of polyethylene terephthalate (PET) fabric with cross-linked layer-by-layer assembled coating

Preparation of thermostable and compatible citrate-based polyesters for enhancing the ultraviolet shielding performance of thermoplastic resin

The effects of UV aging process on the structure and properties of high-tenacity poly(ethylene terephthalate) industrial fiber

The Puncture and Water Resistance of Polyurethane- Impregnated Fabrics after UV Weathering

The Influence of Titanium Dioxide (TiO2) Particle Size and Crystalline Form on the Microstructure and UV Protection Factor of Polyester Substrates