Abstract:This study presented the UV‐initiated methods to graft polyacrylamide (PAM) hydrogel on the surface of polyester (PET) fibers toward the one‐step and the two‐step methods. The results of the study indicate that PAM hydrogels can enhance the hydrophilic property of PET fibers. Additionally, the modified PET fibers exhibit the swelling properties. It is widely recognized that polyester (PET) fibers with swelling properties are necessary for advanced applications of PET fibers in waterproof fabrics. This study presented the UV‐initiated methods to graft polyacrylamide (PAM) hydrogel on the surface of PET fibers. In the one‐step method, PET fibers are impregnated with a mixed solution of the photoinitiator benzophenone (BP) and the monomer acrylalkylamine (AM). Then, the PET fiber was directly exposed to UV light. In the two‐step method, PET fibers were first impregnated with a photoinitiator solution to generate BP radicals. Then, the fibers impregnated with a monomer solution before being grafted by UV light. Both two methods ultimately achieve PAM gelation‐modified PET fibers. The chemical composition and surface structure were detected by Fourier transform infrared spectroscopy and scanning electron microscope. The findings demonstrate that the PAM hydrogel was successfully grafted on the PET fibers through one‐step method or a two‐step method. In addition, the properties of the grafted PET fibers were evaluated by grafting yield, contact angle, and swelling test. The study indicated that the modified PET fibers via a two‐step method exhibited a superior grafting yield up to 29.3% (PET‐2n) and 54% (PET‐2) compared to the one‐step technique (PET‐1). It was shown that the grafting efficacy of PET fibers modified by two‐step method is better than one‐step method. The static contact angles of PET fibers by UV‐Induced were all reduced. For instance, the contact angles of PET‐2n were decreased from 115° to 62.9°; and the two‐step modified PET fiber after acetone cleaning (PET‐2) decreased from 115° to 60°. It was suggested that the hydrophilicity of the modified PET fibers significantly increased. In addition, the research shows that the gelation‐modified fibers were all possessed swelling properties.

Preparation of New Hydrophilic PET Fiber by Grafting with Acrylic Acid and Modification with Amino Groups for Improvement of Dyeing Ability

Preparation and properties of polyester fibers with polyacrylamide hydrogel grafted by UV‐irradiation

Melting-reactive dyes for mass coloration of synthetic fibres—part I: perylene-3,4,9,10-tetracarboxylic acid dianhydride in poly(ethyleneterephthalate)

Photo-grafting modification of polypropylene nonwovens with acrylic acid and its filtration adsorption and desorption toward cationic dye

Low Temperature Plasma Initiated Grafting Modification on PET Fabrics

Layer-by-Layer Assembly of Polyelectrolyte Multilayer onto PET Fabric for Highly Tunable Dyeing with Water Soluble Dyestuffs

Synthesis, Characterization, Application of PET Waste Blended with Hybrid Fibers and Preparation of Fiber Derived Unsaturated Resin

Preparation of dyeing, flame retardant and anti-dripping polyethylene terephthalate fibers based on natural sodium copper chlorophyll dyeing and intercalation of phosphorylated sucrose fatty acid ester

PVA Hydrogel Functionalization via PET-RAFT Grafting with Glycidyl Methacrylate and Immobilization with 2-Hydroxypropyltrimethyl Ammonium Chloride Chitosan via Ring-Open Reaction

Preparation and Characterization of PET Fabric Grated Nano-microcrystalline Cellulose

Scalable Preparation of Superdurable, Self-Healing, and Biocompatible Superhydrophobic Poly(ethylene terephthalate) Fabrics

Toward a Sustainable Approach for Durably Hydrophilic and UV Protective PET Fabric through Surface Activation and Immobilization Integrating Epigallocatechin Gallate and Citric Acid

Preparation of a copper porphyrin derivative and its surface modification for simultaneously endowing PET fibers with dyeing, flame retardant and anti-dripping performance

Removal of anionic dyes with glycidyl methacrylate-grafted polyethylene terephthalate (PET) fibers modified with ethylenediamine

Preparation of flame retardant and anti-dripping PET fabric based on sodium copper chlorophyllin dyeing, UV grafting and phosphorylation

Recycled PET/PA6 Fibers from Waste Textile with Improved Hydrophilicity by In-Situ Reaction-Induced Capacity Enhancement

Anti-dripping PET Fabrics Prepared by Two Steps Radiation-induced Grafting

Photografting Modification of PET Nucleopore Membranes

Surface Modification of PET Fiber with Hybrid Coating and Its Effect on the Properties of PP Composites.

Preparation of hydrophilic polypropylene hollow fiber membranes by UV modification

Hydrophilic Modification of Polyester/Polyamide 6 Hollow Segmented Pie Microfiber Nonwovens by UV/TiO2/H2O2