Abstract:A lot of research has been focused on increasing the specific surface area of adsorbents over a long period of time to remove heavy metal ions from wastewater using the adsorbent. However, porous adsorbents with high specific surface area have demonstrated drawbacks in water purification processes, such as high pressure drop and limitations in the adsorption capacity of heavy metal ions. In recent years, a mechanism-based convergence method involving adsorption/chemical precipitation has emerged as a promising strategy to surmount the constraints associated with porous adsorbents. The mechanism involves amine groups on chelating fibers dissociating OH − ions from water molecules, thereby raising the pH near the fibers. This elevated pH promotes the crystallization of heavy metal ions on the fiber surfaces. The removal of heavy metal ions proceeds through a sequence of adsorption and chemical precipitation processes. An adsorbent based on chelating fibers, integrating adsorption technology with chemical precipitation, demonstrates superior performance in removing significant quantities of heavy metal ions (ca. 1000–2000 mg/g for Cd 2+ , Cu 2+ and Pb 2+ ) when compared to developed porous adsorbents (ca. 50–760 mg/g for same ions). This review paper introduces advanced polymer fibers endowed with the capability to integrate hybrid technology, delves into the mechanism of hybrid technology, and examines its application in process technology for the effective removal of heavy metal ions. The versatility of these advanced fibers extends far beyond the removal of heavy metal ions in water treatment, making them poised to garner significant attention from researchers across diverse fields due to their broad range of potential applications. After further processes involving the removal of templates from chelating polymeric fibers used as supports and the reduction of precipitated heavy metal oxide crystals, the resulting heavy metal crystals can exhibit thin walls and well-interconnected porous structures, suitable for catalytic applications.

Fast Removal of Heavy Metal Ions and Phytic Acids from Water Using New Modified Chelating Fiber

Collectable and Recyclable Mussel-Inspired Poly(Ionic Liquid)-Based Sorbents for Ultrafast Water Treatment

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation of New Chelating Fiber with Waste PET As Adsorbent for Fast Removal of Cu2+ and Ni2+ from Water: Kinetic and Equilibrium Adsorption Studies

Ultrafast and Stable Adsorption–Desorption Performance for Recovery of Valuable Rare-Earth Ions using High-Density Polyacrylic Acid Brush-Grafted Polypropylene Fibers Optimized by RSM Models

Poly(Amidoamine) Dendrimer (pamam) Grafted on Thin Film Composite (tfc) Nanofiltration (nf) Hollow Fiber Membranes for Heavy Metal Removal

Phytic acid modified polyacrylonitrile nanofiber membranes: Fabrication, characterization, and optimization for Pb2+ adsorption

Hybrid method integrating adsorption and chemical precipitation of heavy metal ions on polymeric fiber surfaces for highly efficient water purification

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

Chelating polymer modified P84 nanofiltration (NF) hollow fiber membranes for high efficient heavy metal removal

Preparation of flexible electrospun AOPAN/PVDF membranes for removing Pb2+ from water

Using iron ion-loaded aminated polyacrylonitrile fiber to efficiently remove wastewater phosphate

Activated carbon-hybridized and amine-modified polyacrylonitrile nanofibers toward ultrahigh and recyclable metal ion and dye adsorption from wastewater

A New Porous Chelating Fiber: Preparation, Characterization, and Adsorption Behavior of Pb(Ii)

Fabrication of amino-functionalized silica hollow nanofibers for removal of heavy metal ions

Fabrication of PVA Nanofibers Grafted with Octaamino-POSS and their Application in Heavy Metal Adsorption

Adsorption and Recovery of Phosphate from Water by Amine Fiber,effects of Co-Existing Ions and Column Filtration

Preparation of New Hydrophilic PET Fiber by Grafting with Acrylic Acid and Modification with Amino Groups for Improvement of Dyeing Ability

Polyelectrolyte electrostatically self-assembled modified porous polyacrylonitrile nanofibers as adsorbents for anionic dye removal

Removal of Acidic Organic Ionic Dyes from Water by Electrospinning a Polyacrylonitrile Composite MIL101(Fe)-NH2 Nanofiber Membrane