Abstract:Xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles (XCMCP) were synthesized and applied to remove Pb(II) and Cu(II) ions from aqueous solutions. To further explore the adsorption mechanisms, the complexes were characterized by Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscope (SEM), Vibrating Sample Magnetometer (VSM), X-ray Diffraction (XRD), and X-ray Photoelectron Spectroscopy (XPS). The effects of pH, contact time, and temperature on the adsorption process were investigated. The results showed that the particles were super-paramagnetic with a saturation magnetization of 34.8 emu g(-1), had an irregular surface, and successfully introduced xanthate groups. The adsorption capacity of XCMCP for Pb(II) or Cu(II) was better in near-neutral pH. The kinetic data were well-described by the pseudo-second-order kinetic model. The Langmuir and Freundlich isotherms fit the equilibrium data well. Based on the Langmuir isotherm model, the maximum adsorption capacities of XCMCP at 328 K were 59.855 and 139.797 mg g(-1) for Pb(II) and Cu(II), respectively. Meanwhile, the effect of temperature on the reaction process was not significant. XCMCP exhibited a good property for repeated use and could still retain an effective adsorption efficiency after seven cycles. The mechanism for Pb(II) and Cu(II) adsorption onto XCMCP involves the interactions of N and S atoms with heavy metals, crystal formation and surface adsorption. Thereinto, contributions of crystal formation were dominant. These properties of XCMCP make it promising for practical use, which suggests that XCMCP is a promising adsorbent for hazardous-metal-ion-contaminated water treatment.

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation of Cotton Fibers Modified with Aromatic Heterocyclic Compounds and Study of Cr(VI) Adsorption Performance

Preparation and Characterization of Cellulose-Based Adsorbent and Its Application in Heavy Metal Ions Removal.

Functionalized cotton via surface-initiated atom transfer radical polymerization for enhanced sorption of Cu(II) and Pb(II)

-Zirconium phosphate nanosheets composite on cotton fiber for the removal of heavy metals

Magnetic recyclable biosorbents based on cotton cellulose and chitosan for copper(ii) removal from polluted water

Crayfish Carapace Micro-Powder (ccm): A Novel and Efficient Adsorbent for Heavy Metal Ion Removal from Wastewater

Adsorption of Cu(Ii) from Aqueous Solutions by Ammoniated Cotton Fiber

Efficient Removal of Heavy Metal Ions with an EDTA Functionalized Chitosan/Polyacrylamide Double Network Hydrogel

Novel recyclable adsorbent for the removal of copper(II) and lead(II) from aqueous solution.

Removal of Cu(II), Cr(III), and Cr(VI) from Aqueous Solution using a Novel Agricultural Waste Adsorbent

A Versatile Amphiprotic Cotton Fiber for the Removal of Dyes and Metal Ions

Preparation of Urea-based Fiber and Adsorption of Cu~(2+) and Cd~(2+) in Water

Removal of Heavy Metal Ions and Anionic Dyes from Aqueous Solutions Using Amide-Functionalized Cellulose-Based Adsorbents.

Electrospun Cellulose Nanocrystals/Chitosan/Polyvinyl Alcohol Nanofibrous Films and Their Exploration to Metal Ions Adsorption

Preparation of A Novel Adsorbent and Heavy Metal Ion Adsorption

Heavy metal ions removal from aqueous solution by xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Multiple Active Sites Cellulose-Based Adsorbent for the Removal of Low-Level Cu(II), Pb(II) and Cr(VI) Via Multiple Cooperative Mechanisms.

Preparation and Application of Aliquat 336 Functionalized Chitosan Adsorbent for the Removal of Pb(II)

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)