Abstract:Surface modification fundamentally influences the morphology of polyethylene terephthalate (PET) fibers produced from abandoned polyester textiles and improve the compatibility between the fiber and the matrix. In this study, PET fiber was modified through solution dip-coating using a novel synthesized tetraethyl orthosilicate (TEOS)/KH550/ polypropylene (PP)-g-MAH (MPP) hybrid (TMPP). The PET fiber with TMPP modifier was exposed to the air. SiO2 particles would be hydrolyzed from TEOS and become the crystalline cores of MPP. Then, the membrane formed by MPP, SiO2 and KH550 covered the surface of the PET fiber. TMPP powder was investigated and characterized by fourier transform infrared spectroscopy, scanning electron microscope (SEM) and thermogravimetric analysis (TGA). TMPP-modified PET fiber was researched by X-ray diffraction and SEM. Furthermore, tensile strength of single fiber was also tested. PET fiber/PP composites were studied through dynamic mechanical analysis and SEM. Flexural properties of composites were also measured. The interfacial properties of PET fiber and PP matrix were indirectly represented by contact angle analysis. Results showed that the addition of TEOS is helpful in homogenizing the distribution of PP-g-MAH. Furthermore, TMPP generates an organic-inorganic 'armor' structure on PET fiber, which can make up for the damage areas on the surface of PET fiber and strengthen each single-fiber by 14.4%. Besides, bending strength and modulus of TMPP-modified PET fiber-reinforced PP composite respectively, increase by 10 and 800 MPa. The compatibility between PET fiber and PP was also confirmed to be increased by TMPP. Predictably, this work supplied a new way for PET fiber modification and exploited its potential applications in composites.

Synthesis, Characterization, Application of PET Waste Blended with Hybrid Fibers and Preparation of Fiber Derived Unsaturated Resin

Synthesis and applications of unsaturated polyester resins based on PET waste

Using polyester waste to synthesize air-drying unsaturated polymer resin

Study on Making Terephthalic Type Unsaturated Polyester Resin From Reclaimed Polyester

Preparation of New Hydrophilic PET Fiber by Grafting with Acrylic Acid and Modification with Amino Groups for Improvement of Dyeing Ability

Recycled PET/PA6 Fibers from Waste Textile with Improved Hydrophilicity by In-Situ Reaction-Induced Capacity Enhancement

Characterization and Application to Fiber Reinforced Composite of Catechol/polyethyleneimine Modified Polyester Fabrics by Mussel-inspiration

Preparation of dyeing, flame retardant and anti-dripping polyethylene terephthalate fibers based on natural sodium copper chlorophyll dyeing and intercalation of phosphorylated sucrose fatty acid ester

The synergetic effect of bis(2-hydroxyethyl) terephthalate from glycolysis of poly(ethylene terephthalate) on the intumescent flame retardancy of waterborne polyurethane

Chemical Degradation of Waste PET and Its Application in Wood Reinforcement and Modification

New bio-based polyester with excellent spinning performance: poly(tetrahydrofuran dimethanol-co-ethylene terephthalate)

Study on Properties of Terephthalic Type Unsaturated Polyester Resin

Surface Modification of PET Fiber with Hybrid Coating and Its Effect on the Properties of PP Composites.

Depolymerization mechanisms and closed-loop assessment in polyester waste recycling

Preparation and Characterization of Quartz-Reinforced Hybrid Composites Based on Unsaturated Polyester Resin from Post-Consumer PET Recyclate

Preparation of biobased poly(propylene 2,5‐furandicarboxylate) fibers: Mechanical, thermal and hydrolytic degradation properties

A facile, alternative and sustainable feedstock for transparent polyurethane elastomers from chemical recycling waste PET in high-efficient way

Chemical Upcycling of Poly(ethylene Terephthalate) with Binary Mixed Alcohols Toward Value-Added Copolyester by Depolymerization and Repolymerization Strategy

Preparation of hyperbranch‐structured polyester fiber via thiol‐ene click reaction under UV light irradiation for asphalt binder modification

Reconstruction of cotton-polyester blended fabric

Exploration of fibers produced from petroleum based-mesophase pitch and pet blends for carbon fiber production