Abstract:The polyethylene terephthalate (PET) is widely used in dry-type insulation application because of its excellent insulation properties. In practice, thermal aging of PET is often encountered, but the related mechanisms and effect of thermal aging on the PET dielectric properties still remain unclear. In the present paper, we presented a systematic and comparative study on the effect of thermal aging on surface microscopic morphological characteristics, DC breakdown strength, trap depths and the apparent mobility. The results indicate that when aged at 130 degrees C, the surface topography becomes coarser than that aged at 80 degrees C. The polarity reversal at the PET/PET interface during the polarization indicates that the injection abilities of Al and Sc electrodes are gradually enhanced when aged at 80 degrees C and 130 degrees C, respectively. Moreover, the measured isothermal discharge currents during depolarization show that the trap depth corresponding to the maximum trap density increases significantly in the beginning of aging, and then it decreases gradually when aged at 80 degrees C, but it increases evidently when aged at 130 degrees C with increasing the aging degree. It also has been found that the apparent trap-controlled charge mobility is greatly enhanced when aged at 80 degrees C with the increase in thermal aging degree. This enhancement is proved to be associated with the decrease in trap energy level at the PET/PET interface. Also, it can be preliminary concluded that the enhancement of DC breakdown strength (at 1500 h) is closely related to the increase in electron type trap energy and its density when aged at 130 degrees C.

The effects of UV aging process on the structure and properties of high-tenacity poly(ethylene terephthalate) industrial fiber

Effects of Physical Aging on Thermomechanical Behaviors of Poly(ethylene Terephthalate)-Glycol (PETG)

Optimizing Physical Aging in Poly(ethylene Terephthalate)-Glycol (PETG)

Thermal aging behavior and heat resistance mechanism of ultraviolet crosslinked ultra‐high molecular weight polyethylene fiber

Structure–Property Evolution of Poly(ethylene Terephthalate) Fibers in Industrialized Process under Complex Coupling of Stress and Temperature Field

Effect of heat treatment on the mechanical properties of PBT/PET yarn

Effect of Thermal-Oxidative Aging on the Microstructure of Thermoplastic Poly(ether-Urethane)

Degradation Behavior of Ultra-High Molecular Weight Polyethylene Fibers under Artificial Accelerated Weathering

The evolution of structure and properties of poly(p-phenylene terephthalamide) during the hydrothermal aging

Isothermal shrinkage kinetics of PET

The Effects of UV Aging on the Cracking of Titanium Oxide Layer on Poly (ethylene Terephthalate) Substrate

Thermal Treatment Effects on Structure and Mechanical Properties of Polybutylene Terephthalate and Epoxy Resin Composites Reinforced with Glass Fiber

An Analysis of the Changes in the Structure and Tensile Properties of Polytetrafluoroethylene Films under Vacuum Ultraviolet Irradiation

Effect of Thermal Aging on the Mechanical Properties of High Tenacity Polyester Yarn

Changes in Properties and Structure of Polyethylene Terephthalate Film under Vacuum Ultraviolet

Effect of Radiation-Induced Cross-Linking on Thermal Aging Properties of Ethylene-Tetrafluoroethylene for Aircraft Cable Materials

Physical and Chemical Changes during Hydrothermal Ageing of Poly (ethylene terephthalate)

Effect of vuv radiation on properties and chemical structure of polyethylene terephthalate film

Investigation of Dielectric Properties of Polyethylene Terephthalate under Different Aging Temperatures

The Aging Mechanism of Thermoplastic Polyurethane Elastomer

Structural evolution and degradation mechanism of Vectran® fibers upon exposure to UV-radiation