Intensification of atmospheric freeze drying for thin food slices with impinging jet
Yiran XuAnarghya Ananda MurthySiew Young QuekAlberto BaldelliAnubhav Pratap SinghMeng Wai Wooa Department of Chemical & Materials Engineering,Faculty of Engineering,University of Auckland,Auckland,New Zealandb Department of Mechanical & Mechatronics Engineering,Faculty of Engineering,University of Auckland,Auckland,New Zealandc Food Science Programme,School of Chemical Sciences,Faculty of Science,University of Auckland,Auckland,New Zealandd School of Agriculture and Food Sustainability,The University of Queensland,Brisbane,Queensland,Australiae BC Food and Beverage Innovation Centre,Faculty of Land and Food Systems,The University of British Columbia,Vancouver,BC,Canada
DOI: https://doi.org/10.1080/07373937.2024.2345120
IF: 3.3
2024-05-10
Drying Technology
Abstract:Atmospheric freeze drying obviates the complexities and costs of maintaining a high vacuum for freeze drying. One of the main drawbacks of atmospheric freeze drying is the low sublimation rate, which is restricted by drying temperatures possible at ambient pressure to prevent food products from softening during dehydration. There is a strong need to intensify the process to reduce the total drying time. This study evaluated the feasibility of using impinging jets to enhance the mass transfer characteristics of the atmospheric freeze drying process. Atmospheric freeze drying experiments on thin lamb slices between −3 to −7 °C showed that the impinging jet configuration has a significant effect in improving the rate of mass transfer flux compared to the conventional cross-flow configuration. This was consistent across different thicknesses of the lamb slices, which would have presented different degrees of internal resistance to mass transfer. Given the amount of non-frozen water in the lamb slices at the drying temperature range evaluated, a scheduled switch from cold air atmospheric freeze drying to a mild hot air drying condition was explored. This strategy enhanced the removal of the remaining water content in the lamb slices, mainly the non-frozen water.
engineering, chemical, mechanical