Abstract:Accurately evaluating the simple shear in sheet metals has proven to be challenging owing to three reasons: a) the detailed shear strain evaluation is different from one publication to another; b) the measured strain is strongly dependent on the employed virtual strain gauge size (LVSG) when digital image correlation (DIC) is utilized; and c) the negligence of the strain perturbation phenomenon (Swift effects) will only result in a rough estimation of the strain–stress behavior. Thus, in this study, a finite strain perturbation analysis according to the configuration of experimental tests was constructed to understand the shear strain–stress evolution, and a high-resolution quasi-in-situ strain measurement technology was developed to capture the localized shear strain with reliable results. Material anisotropy and simple shear specimen geometry were identified as the two major contributors to the Swift effects. Hence, a finite strain perturbed shear kinematics was first proposed, revealing that some specific shear strain estimations led to a certain degree of error (∼12–25%) at large deformation levels. This work demonstrated that the finite element simulation of simple shear tests, performed using the carefully calibrated YLD2004 yield model, can be utilized to reasonably predict perturbation. A Vickers-indentation-based quasi-in-situ strain measurement was further developed to obtain reliable local strain of the shear zone with LVSG =28 μm. The technique was found to provide high-resolution strain detection to satisfy the necessary conditions of accurate strain measurement when a narrow shear band is present. The results yielded a 30% higher von Mises strain under simple shear deformation than that reported in previous publications for a similar DP980 sheet. The said result was also found to be larger than the fracture strain determined through the so-called “hybrid method”. The proposed perturbed shear kinematics was further implemented in the anisotropic elastoplasticity framework to show that the magnitude of normal stresses did not always remain in the second order with respect to the shear stress due to strain perturbation. Thus, the concept of “perturbed” shear stress was designed to consider the effects of perturbation, and the findings signified a 6–13% change in shear stress compared with the commonly used shear stress for tested scenarios.

Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests

Experimental Analysis of the Piezomagnetic Behavior of Double-Shear Bolted Connections of Wire and Arc Additively Manufactured Steel

Interpretation of Torsional Shear Results for Nonlinear Stress–strain Relationship

Shear resistance of slender webs in I-girders

Full-field Analysis of Shear Test on 3D Orthogonal Woven C/C Composites

Measurement of meso-scale shear deformations for modelling textile composites

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

Identification of Shear Properties for Woven Fiber Reinforced Polymer Simulation

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Effect of Tackification on In-Plane Shear Behaviours of Biaxial Woven Fabrics in Bias Extension Test: Experiments and Finite Element Modeling

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Shear Response of Prestressed Thin-Webbed Continuous Girders

Design and Comparison of Two New In-Plane Shear Specimens

THE MECHANICAL PERFORMANCE OF SINGLE DIAGONAL LACING DOUBLE-WEB STAY MEMBERS OF OPEN CONCRETE FILLED STEEL TUBES WITH FOUR MAIN ELEMENTS

A novel method for the characterization of through-thickness shear constitutive behavior of composites

Influence of the Unit Cell Parameters on the Thermomechanical Non-Symmetric In-Plane Shear Behavior of 2D Biaxial Braided Preform for Thermoplastic Biocomposites

Experiment for Measuring Mechanical Properties of High-Strength Steel Sheets under Cyclic Loading by V-Shaped Double-Shear-Zone Specimens

Experimental and Numerical Analysis of an In-Plane Shear Specimen Designed for Ductile Fracture Studies

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer–Matrix Composite under ±45° Off-Axis Tensile Testing

Simple shear deformation of sheet metals: finite strain perturbation analysis and high-resolution quasi-in-situ strain measurement